951012-XXX TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// CELLULAR (2G/3G) Stubby Antenna 12/2018 Page 1 HIRSCHMANN MOBILITY CELLULAR (2G/3G) Stubby Antenna CEL 8521 ST/series Pt no. 951 012-… Subject to alterations Technical data Electrical Specification Frequency range GSM 850: GSM 900: GSM 1800: GSM 1900: UMTS: 824 – 894 MHz 880 – 960 MHz 1710 – 1880 MHz 1850 – 1990 MHZ 1920 – 2170 MHz Impedance 50 Ohm VSWR / Return loss ≤ 2,0 (Dependant of environment) Gain (linear gain, vetical polarization) 2 dBi* Mechanical Dimensions Diam 10,5 - 50 x 17 mm Housing Materials ABS Weight 7 g Operations temperature range Storage temperature range -40 + 85° C -40 + 85 °C Housing protection class IP50 Versions CEL 8521 ST 90° SMAm 951 012-001 SMA male angled 90° CEL 8521 ST 90° FMEf 951 012-002 FME female angled 90° CEL 8521 ST SMAm 951 012-004 SMA male straight *dBi: referenced to an isotropic radiator
- Connectors SMA male or FME female
- Direct mounting on device
- For CELLULAR networks (GSM 850, GSM 900, 1800, 1900, UMTS)
- M2M application - telemetering, remote, maintenance, …
CELLULAR (2G/3G) STUBBY ANTENNA CEL 8521 ST/series Pt no. 951 012-… TE CONNECTIVITY TRANSPORTATION SOLUTIONS /// CELLULAR (2G/3G) Stubby Antenna 12/2018 Page 2 Technical drawings SMA: Installation FME:
- Take the necessary electrostatic precautions for a connection of electronic components (Potential ESD < 1 KV)
- Space must be sufficient (minimum 1cm free around the antenna)
- No metallic (conductive) surface above the antenna
- not waterproof, so area of the antenna must be dry
- Screw the connector on the device by hand (Equivalent Torque 1 Nm +0-20%)
- No adjunction of any material (silicones, glue, …) Hirschmann Car Communication GmbH, a TE Connectivity Company Stuttgarter Straße 45 - 51
72654 Neckartenzlingen
te.com TE, TE Connectivity, TE connectivity (logo), and EVERY CONNECTION COUNTS are trademarks. Hirschmann is a trademark. GSM and UMTS are trademarks. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes o nly, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages ari sing out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2018 TE Connectivity Ltd. family of companies All Rights Reserved.