95100 SPECTRUM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

■ Built-in-Test (BIT) ■ Jammers ■ Phase Locked Loops ■ Lower Cost ■ Modulation Option Spectrum Microwave, Inc. 2707 Black Lake Place Phila, Pa. 19154 www.SpectrumMicrowave.com PH: 215-464-4000 FAX: 215-464-4001 Spectrum Microwave Series 95 Comb Generators use a Step Recovery Diode (SRD) to generate very narrow voltage spikes; these in turn produce an output frequency spectrum rich in harmonics. The spacing between the signals is equal to the source that drives the SRD, which in most cases is a stable crystal oscillator. Examples of the spectrum for a number of comb generators are included on the reverse side of this fact sheet. The crystal oscillator is normally internal; however, an external signal can be used to drive the SRD. If only certain combline signals are required for a particular application, a filter tuned to the desired combline must be used. Comb Generators have several applications. They are commonly used as Built-in-Test (BIT) oscillators to calibrate receivers; other uses are in Phase Locked Loops (PLL), Jammers, Antenna Testing, Linearizing Voltage Controlled Oscillators, etc. Comb Generators Series 900 Series 95 Combline Spacing 1 to 1000 MHz Commercial -- Military

Spectrum Microwave, Inc. 2707 Black Lake Place Phila, Pa. 19154 www.SpectrumMicrowave.com PH: 215-464-4000 FAX: 215-464-4001 Series 900 Comb Generators SERIES 95 SPECIFICATIONS SERIES 95 SPECTRUM ENVELOPES