951-018-XXX TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- Telematic & M2M application - telemetering, remote, maintenance
- Public transport, Building indoor & outdoor, …
- High performance, coverage & data rate Technical Data Dimensions ca. 124 mm x 80 mm x 84 mm Housing materials ASA+PC Weight 320 g var. acc. to versions Temperature range Operations: -40°C – +85°C Storage: -40°C – +85°C Protection class IP66 (acc. IEC 60529) Cable type RG 174 Low Loss compliant
Transportation Solutions /// Cellular-MIMO (2G/3G/4G/5G)/ GNSS (GPS/GLONASS/QZSS/BEIDOU/GALILEO)/ Page 2 WLAN-MIMO (2.4GHz/5.8GHz) Screw Antenna Cellular-MIMO (2G/3G/4G/5G)/ GNSS (GPS/GLONASS/QZSS/BEIDOU/GALILEO)/ WLAN-MIMO (2.4GHz/5.8GHz) Screw Antenna 5G S MIMO/Series | Part Number 951-018-XXX Technical Data Cellular Frequency range * LTE-LB 700: 698 - 862 MHz VSWR 2.8AMPS/ GSM 850: 824 - 894 MHz GSM 900: 880 - 960 MHz GSM 1800: 1710 - 1880 MHz VSWR 2.0GSM 1900: 1850 - 1990 MHz UMTS 2100: 1920 - 2170 MHz LTE-HB 2600: 2305 - 2690 MHz VSWR 1.9 5G 3500: 3300 – 3800 MHz VSWR 1.7 5G 4000: 3800 – 4200 MHz VSWR 1.7 5G 5000: 4400 – 5000 MHz VSWR 2.8 Gain Avg. 2.0 dBi * Max. 5.5 dBi1) Polarization linear, vertical Decopling Cell 1 vs 2 LB: 8 dB HB: > 18 dB Impedance 50 Ohm Load capacity Max. 10 W pulsed GNSS Frequency range * GPS L1/QZSS: 1563 - 1587 MHz Beidou (B1C): 1559 - 1591 MHz Galileo E1: 1559 - 1591 MHz GLONASS G1: 1593 - 1610 MHz VSWR ≤ 1.5 Gain 2 dBic2) Polarization Right hand circular Impedance 50 Ohm Voltage supply 2.9 – 5.5 VDC Current consumption typ. 13 ±2 mA Rejection (LNA) > 30 dB Amplification (LNA) 27 ± 2 dB Noise figure (LNA) ≤ 3.0 dB WLAN or Bluetooth Frequency range * Bluetooth: 2400 - 2484 MHz IEEE 802.11 b, g, n, ax: 2412– 2484 MHz ≤ 200 mW IEEE 802.11 a, h, n, ac, ax: 5150– 5875 MHz ≤ 1000 mW IEEE 802.11 p: 5755– 5925 MHz ≤ 8 W EIRP <5.81 GHz ≤ 2 W EIRP >5.85 GH
Transportation Solutions /// Cellular-MIMO (2G/3G/4G/5G)/ GNSS (GPS/GLONASS/QZSS/BEIDOU/GALILEO)/ Page 3 WLAN-MIMO (2.4GHz/5.8GHz) Screw Antenna Cellular-MIMO (2G/3G/4G/5G)/ GNSS (GPS/GLONASS/QZSS/BEIDOU/GALILEO)/ WLAN-MIMO (2.4GHz/5.8GHz) Screw Antenna 5G S MIMO/Series | Part Number 951-018-XXX Versions PN Description Cable length CELL CELL2 GNSS WLAN 1 WLAN 2 951-018-711 C2GNW2 7059 S MIMO 0,2 ~ 200 mm SMA male SMA male SMA male SMA male SMA male 951-018-611 CGNW2 7059 S MIMO 0,2 ~200 mm SMA male SMA male SMA male SMA male 951-018-511 C2W2 7059 S MIMO 0,2 ~200 mm SMA male SMA male SMA male SMA male 951-018-411 CW2 7059 S MIMO 0,2 ~200 mm SMA male SMA male SMA male 951-018-311 C2GNW 7059 S MIMO 0,2 ~200 mm SMA male SMA male SMA male SMA male 951-018-211 C2W 7059 S MIMO 0,2 ~200 mm SMA male SMA male SMA male 951-018-113 C2GN 7038 S MIMO 5,0 ~5000 mm Fakra female, Code D Fakra female, Code Z Fakra female, Code C 951-018-112 C2GN 7038 S MIMO 3,0 ~3000 mm SMA male SMA male SMA male 951-018-111 C2GN 7038 S MIMO 0,2 ~200 mm SMA male SMA male SMA male 951-018-011 CEL2 7038 S MIMO 0,2 ~200 mm SMA male SMA male Other variants are possible acc. quantities (long dimensions in RG174 are not adapted to WLAN >5 GHz) VSWR ≤ 2 Gain (linear gain, vertical polarization) typ. 2 dBi1 ) Polarization linear, vertical Decopling WLAN 1 vs 2 LB: > 20 dB HB: > 15 dB Impedance 50 Ohm 1) dBi: referenced to an isotropic radiator 2) dBic: referenced to an isotropic radiator, circular polarization * non exhaustive list, contact us for new standards or bands update s Technical Drawing
Transportation Solutions /// Cellular-MIMO (2G/3G/4G/5G)/ GNSS (GPS/GLONASS/QZSS/BEIDOU/GALILEO)/ Page 4 WLAN-MIMO (2.4GHz/5.8GHz) Screw Antenna te.com/hirschmann-mobility hirschmann-mobility@te.com Hirschmann Car Communication GmbH, a TE Connectivity Company Stuttgarter Strasse 45-51
72654 Neckartenzlingen | Germany
Phone: +49 7127 14-0 | Fax: +49 7127 14-1428 TE, TE Connectivity, and TE connectivity (logo) are trademarks. Hirschmann, GSM, GLONASS and Bluetooth are trademarks. Other products and/or company names might be trademarks of their respective owners. DISCLAIMER While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this data sheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabil - ity or fitness for a particular purpose. The dimensions in this data sheet are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. © 2020 TE Connectivity. All Rights Reserved. | Published 10-2020 Cellular-MIMO (2G/3G/4G/5G)/ GNSS (GPS/GLONASS/QZSS/BEIDOU/GALILEO)/ WLAN-MIMO (2.4GHz/5.8GHz) Screw Antenna 5G S MIMO/Series | Part Number 951-018-XXX Installation Specs:
- Take the necessary electrostatic precautions for a connection of electronic components (Potential ESD < 1 kV)
- Surface must be quite flat (maximum radius 1cm per meter) & max thickness 10 mm & conductive (metal recom - mended 400x400 mm)
- No metallic (conductive) surface above the antenna
- Connectors are not waterproof, so area below the antenna must be dry
- GNSS connector must only be connected to a satellite receiver with a controlled and limited power source acc. datasheet
- For extension cables in WLAN > 5 GHz, we highly recommend a RG58 low loss or better Process:
- Drill a hole (diameter 15 +4/-0,5 mm)
- Clean with isopropyl alcohol or similar
- No adjunction of any material (silicones, glue, …)
- Screw the nut on the grounding plate (Torque 5 Nm +0 -10%)
- Check that the coaxial cable is not electrically charged (Potential ESD < 1 kV)
- Connect the coaxial cable connector by hand without forcing (Torque 1 +/- 0,15 Nm = handmade)
- Check that the cables respect the appropriate way, not pulled / stressed / bended < 25 mm radius / touching aggressive parts