95011-2213-F-BLK IRCTT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. A subsidiary of TT electronics plc• 4222 South Staples Street • Corpus Christi T exas 78411 USA© IRC Wire and Film Technologies Division T elephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com Metal Glaze™ thick film element fired at 1000°C to solid ceramic substrate High temperature dielectric coating Solder over nickel barrier High Reliability Surface Mount Resistor Electrical Data MCHP Series

  • DESC Approved
  • Excellent surge capability
  • Reliable Metal Glaze™ technology
  • Superb solderability - reflow and wave
  • Operating temperature -55°C to +150°C
  • Minimum board real estate requirements
  • Established SPC and continuous improvement programs Size Code¹ Industry Footprint IRC Type DESC Drawing Rated Power² (watts) Working Voltage³ Maximum Voltage Resistance Range (ohms) Tolerance (±%) TCR (ppm/°C) B 1206 MCHP 1/8 950114 0.125 @ 70°C 200 400 0.1 to 1.0M 1, 2, 5 100 D 2010 MCHP 1/2 94048 0.5 @ 70°C 300 600 0.1 to 1.6M 1, 2, 5 100 F 2512 MCHP 1 950065 1.0 @ 70°C 350 700 0.1 to 2.2M 1, 2, 5 100 H 3610 MCHP 2 94047 2.0 @ 25°C 500 1000 0.2 to 2.2M 1, 2, 5 100 ¹ See page 8 for product dimensions, recommended solder pads, and standard packaging. ² For operation above 70°C, use power derating curve. ³ Not to exceed √ P x R

4 Formerly 85083 5 Formerly 87037

25 35 45 55 65 75 85 95 105 115 125 135 145 30 40 50 60 70 80 90 100 110 120 130 140 150 % of Rated Power 120 100 Ambient Temperature (°C) Power Derating Curve 95006, 95011, 94048, 94047 The MCHP High Reliability Surface Mount Resistors are part of the RG product family of precision resistors developed by IRC in 1960 to meet the stringent demands of the military market. In leaded form, these resistors are qualified to level S under MIL-R-39017 and MIL-R-55182. The MCHP resistor utilizes the core element from this series, but with modified contacts and encapsulation. The MCHP High Reliability Surface Mount Resistors are in compli- ance to DESC drawings 85083 (MCHP 1/8) and 87037 (MCHP 1) and are supplied in accordance tot he requirements of MIL-R-55342. Under this specification, all resistors are subjected to "Thermal Shock". Samples are selected from each lot and tested to "TCR", "STOL", "Terminal adhesion", "Solderability", and "Visual" to ensure the lot is in conformance to specified requirements. MCHP Series Issue September 2008 Sheet 1 of 2

  • 4222 South Staples Street • Corpus Christi T exas 78411 USA© IRC Wire and Film Technologies Division T elephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com IRC Advanced Film Division Environmental Data Size Code¹ Industry Footprint IRC Type DESC Drawing Rated Power² (watts) Working Voltage³ Maximum Voltage Resistance Range (ohms) Tolerance (±%) TCR (ppm/°C) B 1206 MCHP 1/8 950114 0.125 @ 70°C 200 400 0.1 to 1.0M 1, 2, 5 100 D 2010 MCHP 1/2 94048 0.5 @ 70°C 300 600 0.1 to 1.6M 1, 2, 5 100 F 2512 MCHP 1 950065 1.0 @ 70°C 350 700 0.1 to 2.2M 1, 2, 5 100 H 3610 MCHP 2 94047 2.0 @ 25°C 500 1000 0.2 to 2.2M 1, 2, 5 100 ¹ See page 8 for product dimensions, recommended solder pads, and standard packaging. ² For operation above 70°C, use power derating curve. ³ Not to exceed √ P x R

Characteristics Maximum Change Test Method Temperature Coefficient ±100 ppm/°C MIL-R-55342E Par 4.7.9 (-55°C + 125°C) Thermal Shock ±0.5% + 0.01 ohm MIL-R-55342E Par 4.7.3 (-65°C + 150°C, 5 cycles) Low Temperature Operation ±0.25% + 0.01 ohm MIL-R-55342E Par 4.7.4 (-65°C @ working voltage) Short Time Overload ±0.25% + 0.01 ohm ±1% for R>100K ohm MIL-R-55342E Par 4.7.5 2.5 x P x R for 5 seconds High Temperature Exposure ±0.5% + 0.01 ohm MIL-R-55342E Par 4.7.6 (+150°C for 100 hours) Resistance to Bonding Exposure ±0.25% + 0.01 ohm MIL-R-55342E Par 4.7.7 (Reflow soldered to board at 260°C for 10 sec- onds) Solderability 95% minimum coverage MIL-STD-202, Method 208 (245°C for 5 seconds) Moisture Resistance ±0.5% 0.01 ohm MIL-R-55342E Par 4.7.8 (10 cycles, total 240 hours) Life Test ±0.5% 0.01 ohm MIL-R-55342E Par 4.7.10 (2000 hours at 70°C intermittent) Terminal Adhesion Strength ±1% + 0.01 ohm no mechanical damage 1200 gram push from underside of mounted chip for 60 seconds Resistance to Board Bending ±1% + 0.01 ohm no mechanical damage Chip mounted in center of 90mm long board, deflected 5mm so as to exert pull on chip contacts for 10 seconds High Reliability Surface Mount Resistor Sample Part No. DESC Drawing Number (CHP 1/8, CHP 1/2, CHP 1, or CHP 2) Resistance Value (100 ohms and greater - First 3 significant digits plus 4th digit multiplier) Example: 100 ohms = 1000, 1000 ohms = 1001, 150,000 ohms = 1503 (Less than 100 ohms - "R" is used to designate decimal) Example: 51 ohms = 51R0, 1.6 ohm = 1R60, 0.25 ohms = R250 Tolerance Packaging Code* (BLK = Bulk, 7 = 7" Reel, 13 = 13" Reel) Ordering Data 95011 - 2213 - F - 13 MCHP Series Issue September 2008 Sheet 2 of 2