9500PC

9500PC 3M | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

November, 2008 3M™ Double Coated Tape 9500PC Product Description Finite Element Analysis (FEA) data is available for this product at: 3m.com/FEA 3M™ Double Coated Tape 9500PC features a thin polyester lm for dimensional stability and improved handling with ease of die-cutting and laminating. 3M™ Adhesive 350 is a medium-rm acrylic adhesive that provides a combination of high wet grab and initial adhesion and good shear holding power to a wide variety of materials, including many plastics. Product Features

3M™ Double Coated Tape 9500PC Technical Information Note The following technical information and data should be considered representative or typical only and should not be used for specication purposes. Typical Physical Properties Property Values Attribute Modier Notes Total Tape Thickness without liner 0.14 mm 5.6 mil Carrier Thickness 0.025 mm 1 mil Adhesive Type 350 Faceside Faceside adhesive is on the interior of the roll, exposed when unwound and liner removed. Adhesive Type 350 Backside Backside adhesive is on the exterior of the roll, exposed when liner is removed. Adhesive Carrier Clear PET (Polyester) Liner Polycoated Kraft Liner Color Natural Primary Liner Thickness 0.11 mm 4.5 mil Adhesive Thickness Attribute Modier Notes 0.058 mm Backside The caliper listed is based on a calculation from manufacturing controlled adhesive coat weight. While past data pages have listed nominal thicknesses of 1 and 2 mils, the coat weight (and theoretical caliper) has not changed. 2.3 mil Backside Backside adhesive is on the exterior of the roll, exposed when liner is removed. 0.058 mm 2.3 mil Faceside Faceside adhesive is on the interior of the roll, exposed when unwound and liner removed. Property: Adhesive Thickness Typical Performance Characteristics Table continued on next page 90° PeelAdhesion Dwell/CureTime Dwell TimeUnits Temp C Temp F Substrate Backing Notes

7.7 N/cm 15 min 22C 72F Stainless Steel 2 mil Aluminum Foil

3M™ Double Coated Tape 9500PC Typical Performance Characteristics (continued) 90° PeelAdhesion Dwell/CureTime Dwell TimeUnits Temp C Temp F Substrate Backing Notes 71 oz/in 15 min 22C 72F Stainless Steel 2 mil Aluminum Foil 12 in/min (300 mm/min)

10.1 N/cm 93 oz/in 72 hr 22C 72F Stainless Steel 2 mil Aluminum Foil

12 in/min (300 mm/min)

13.2 N/cm 121 oz/in 72 hr 70C 158F Stainless Steel 2 mil Aluminum Foil

12 in/min (300 mm/min)

8.1 N/cm 74 oz/in 72 hr 22C 72F ABS 2 mil Aluminum Foil

12 in/min (300 mm/min)

4.8 N/cm 44 oz/in 72 hr 22C 72F Polypropylene (PP) 2 mil Aluminum Foil

12 in/min (300 mm/min)

6.5 N/cm 60 oz/in 72 hr 22C 72F Polycarbonate (PC) 2 mil Aluminum Foil

12 in/min (300 mm/min)

8.4 N/cm 77 oz/in 72 hr 22C 72F Polyester (PET) Aluminum Foil

3.6 N/cm 33 oz/in 72 hr 22C 72F High Density Polyethylene (HDPE)

12 in/min (300 mm/min) Property: 90° Peel AdhesionMethod: ASTM D3330Environmental Condition: 52%RH Relative High Temperature Operating Ranges Test Condition 177 °C 350 °F Short Term (minutes, hours) 93 °C 200 °F Long Term (days, weeks) Property: Relative High Temperature Operating Ranges Table continued on next page PropertyValues MethodTestConditionNotes Dwell/CureTime DwellTimeUnits TempC TempF EnvironmentalConditionSubstrateBacking Static Shear 10000 min ASTM D3654 1000 g @ Room Temperature 0.5 in² sample size

3M™ Double Coated Tape 9500PC Typical Performance Characteristics (continued) PropertyValues MethodTestConditionNotes Dwell/CureTime DwellTimeUnits TempC TempF EnvironmentalConditionSubstrateBacking Static Shear 10000 min ASTM D3654 500 g @ Room Temperature 0.5 in² sample size 180° Peel Adhesion

15.3 N/cm140 oz/in ASTM D3330

12 in/min (300 mm/min) 72 hr 22C 72F 52%RHStainless Steel Aluminum Foil Available Sizes Property Values Attribute Modier Note Subject to Minimum Order Requirements Standard Roll Length 33 m 36 yd Minimum Available Width 6.35 mm 1/4 in Maximum Available Width 1220 mm 48 in Normal Slitting Tolerance 0.8 mm ±1/32 in Core Size 76.2 mm 3 in ID Maximum Length Width 132 m 144 yd 1/4in - 1/2in 329 m 360 yd 1/2 in - 48in Property: Maximum Length Handling/Application Information Application Ideas

• Dissimilar materials joining, such as metal to plastic. • High performance joining and bonding.

Table continued on next page 3M™ Double Coated Tape 9500PC Handling/Application Information (continued) Application Techniques Application Equipment To apply adhesives in a wide web format, lamination equipment is required to ensure acceptable quality. To learn more about working with pressure-sensitive adhesives please refer to technical bulletin, Lamination Techniques for Converters of Laminating Adhesives (70-0704-1430-8). For additional dispenser information, contact your local 3M sales representative, or the toll free 3M sales assistance number at 1-800-362-3550. Storage and Shelf Life Store in original cartons at 70°F (21°C) and 50% relative humidity. If stored under proper conditions, product retains its performance and properties for 24 months from date of manufacture. Trademarks 3M is a trademark of 3M Company. References Property Values 3m.com Product Page https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Double-Coated-Tape-9500PC?N=5002385+3293241557&rt=rud Safety Data Sheet (SDS) https://www.3m.com/3M/en_US/company-us/SDS-search/results/?gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=9500PC 9500PC 9500B 9593 3028EK Adhesive Type Attribute Modier: Faceside 350 350 350 350 Relative High Temperature Operating Ranges (°C) Test Condition: Short Term (minutes, hours) 177 177 177 177 Relative High Temperature Operating Ranges (°C) Test Condition: Long Term (days, weeks) 93 93 93 93

3M™ Double Coated Tape 9500PC Family Group (continued) ISO Statement Recognition/Certication 9500PC 9500B 9593 3028EK Adhesive Thickness (mm) Attribute Modier: Backside 0.058 0.058 0.038 0.058 Liner Color Attribute Modier: Primary Natural Natural White White Adhesive Type Attribute Modier: Backside 350 350 350 350 Adhesive Thickness (mm) Attribute Modier: Faceside 0.058 0.058 0.038 0.058 Total Tape Thickness without liner (mm) 0.14 0.14 0.089 0.14 Carrier Thickness (mm) 0.025 0.025 0.013 0.025 Adhesive Carrier Clear PET (Polyester) Black PET (Polyester) Clear PET (Polyester) Clear PET (Polyester) Liner Polycoated Kraft Polycoated Kraft 55# Densied Kraft Extensible Kraft Liner Thickness (mm) 0.11 0.11 0.081 0.14 This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.

3M™ Double Coated Tape 9500PC Information 3M United States 3M Center St. Paul, MN 55144-1000 800-362-3550 www.3M.com Please recycle. © 3M 2021. All Rights Reserved. The brands listed above are trademarks of 3M Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sucient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Warranty, Limited Remedy, and Disclaimer: Unless a dierent warranty is specically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specication at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost prots or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.