940C6P1K-F CDE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02740•Phone: (508)996-8561•Fax: (508)996-3830 www.cde.com Type 940C through 943C Power Film Capacitors
Electrical Characteristics
Operating Temperature –55 ºC to +105 ºC *Full rated voltage at 85 ºC, derate linearly to 50% rated voltage at 105 ºC Capacitance tolerance ±10% standard tolerance Dissipation Factor <0.1% at 1 kHz, 25 ºC Dielectric Withstand 1.6 x rated voltage for 60 seconds Insulation Resistance >100,000 MΩ x µF at 100 Vdc measured after 2 minutes Equivalent Series Resistance (ESR) See rating tables for values Equivalent Series Inductance (ESL) See rating tables for values dV/dt See rating tables for values Rated Current, Ipk and Irms See rating tables for values Maximum allowable current in amperes at 70 ºC Capacitance Temperature Coefficient –200 ppm/ºC ±100 ppm Service Life 30,000 hours @ rated V ac, 70 ºC 60,000 hours @ rated Vdc, 70 ºC Accelerated Tests Accelerated Life 1.25 x rated DC voltage at 85 ºC for 2,000 hours Performance <3% capacitance change ESR <125% of initial reading IR >50% of initial limit Accelerated Pulse Testing per IEC-384 Performance <3% in capacitance change <.003 increase in DF from initial value Typical Characteristics –55 –25 0 25 50 75 105 –55 –25 0 25 50 75 105–55 –25 0 25 50 75 105 .05 .10 .15 .20 Degrees CentigradeDegrees Centigrade % Capacitance Change % Dissipation Factor
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02740•Phone: (508)996-8561•Fax: (508)996-3830 www.cde.com d 1.625º (41mm) MIN.L MAX 1.625º (41mm) MIN. D MAX Type 940C High dV/dt, Round Polypropylene Film Capacitors Double Metallized – Axial Leads Type 940C round, axial leaded fi lm capacitors have polypropylene fi lm and dual metallized electrodes for both self healing properties and high peak current carrying capability (dV/dt). This series features low ESR characteristics, excellent high frequency and high voltage capabilities. Specifi cations Voltage Range: 600 – 3000 Vdc (275 - 750 Vac, 60 Hz) Capacitance Range: 0.01 – 4.7 µF Capacitance Tolerance: ±10% Operating Temperature Range: –55 °C to 105 °C* *Full-rated voltage at 85 °C–Derate linearly to 50%-rated voltage at 105 °C Ratings Construction
850 Vdc and Higher
NOTE: Refer to Application Guide for test conditions. Contact us for other capacitance values, sizes and performance specifi cations. IRMS Catalog Typical Typical 70 ºC Cap. Part Number D L d ESR ESL dV/dt I peak 100 kHz (µF) Inches (mm) Inches (mm) Inches (mm) (mΩ) (nH) V/µs (A) (A)
600 Vdc (275 Vac)
850 Vdc (450 Vac)
Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). CDE
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02740•Phone: (508)996-8561•Fax: (508)996-3830 www.cde.com IRMS Catalog Typical Typical 70 ºC Cap. Part Number D L d ESR ESL dV/dt I peak 100 kHz (µF) Inches (mm) Inches (mm) Inches (mm) (mΩ) (nH) V/µs (A) (A)
1000 Vdc (500 V
ac) 1.7
1200 Vdc (500 Vac)
1600 Vdc (630 Vac)
.33 940C16P33K-F .925 (23.5) 1.81 1 (46.0) .047 (1.2) 7 31 800 264 10.0
2000 Vdc (630 Vac)
3000 Vdc (750 Vac)
.010 940C30S1K-F 0.453 (1 .047 940C30S47K-F 0.65 (16.5) 1.81 1 (46.0) .040 (1.0) 14 28 1440 68 5.7 Type 940C High dV/dt, Round Polypropylene Film Capacitors Ratings