DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Rev. 2.0 Technical Datasheet Murata Wire Bondable Automotive Vertical SiCap WASC 02065 3.7nF BV150 Wire Bondable Automotive Vertical SiCap WASC 02065 3.7nF BV150 General description The WAS Capacitor has been qualified according to AECQ-100 up to 68V, Grade 0 ( -40°C/+150°C) 2000 cycles TMCL. Qualification report of the BV150 technology according to AECQ100 requirements is available on request. Target applications are decoupling and filtering of active devices when miniaturization and low ESL are and other package size are available as a single die or capacitor array; please feel free to contact us. The WAS Capacitor is based on PICS Integrated Passive technology. Standard PCB FR4 can be used. Assembly: WASC capacitors are directly mounted on the PCB application using die attach and wire bonding. WASC capacitors have the bottom electrode in Ti (0.1 µm)/Ni (0.3µm)/Au (0.2µm) and top electrode in gold, other top finishing are available on request such as Aluminum. Key features

  • AECQ-100 Qualification
  • Full compatible Monolithic ceramic capacitors for replacement
  • Ultra-high stability of capacitance value: o Temperature 60ppm/K (-55 °C to +150 °C) o Voltage <0.02%/Volts o Negligible capacitance loss through ageing
  • Low profile 0.25mm or 0.1mm, but other thicknesses possible on request
  • Small size 0.5 x 1.625 mm
  • Break down voltage > 150V
  • Low leakage current
  • High reliability
  • High operating temperature (up to 150 °C)
  • Compatible with high temperature cycling during manufacturing operations (exceeding 300 °C)
  • Applicable for standard wire bonding assembly (ball and wedge) Key applications
  • Any demanding automotive applications, such as ADAS sensors (Lidars, Radars) as well as all Automotive SiP devices (Mems sensors, TPMS…)
  • Supply decoupling / filtering of active device
  • High reliability applications
  • Devices with battery operations
  • High temperature applications
  • High volumetric efficiency (i.e. capacitance per unit volume)

Rev. 2.0 Technical Datasheet Murata Wire Bondable Automotive Vertical SiCap WASC 02065 3.7nF BV150 Wire Bondable Automotive Vertical SiCap WASC 02065 3.7nF BV150 Functional diagram The next figure provides implementation set-up diagram. Figure 1 Block Diagram Electrical performances Symbol Parameter Conditions Min. Typ. Max. Unit C Capacitance value @+25°C - 3.7 - nF ∆CP Capacitance tolerance (1) @+25°C -15 - +15 % TOP Operating temperature -55 20 150 °C TSTG Storage temperature (2) -70 - 165 °C ∆CT Capacitance temperature variation -55 °C to 150 °C - 60 - ppm/K RVDC Rated voltage (3) - 68(4) 61(5) VDC BV Break down voltage @+25°C 150 - - V ∆CRVDC Capacitance voltage variation From 0 V to RVDC, IR Insulation resistor @RVDC, +25°C, 120s - 1 - GΩ ESL Equivalent Serial Inductance (6) @+25°C, SRF shunt mode - 10 - pH ESR Equivalent Serial Resistance (6) @+25°C, shunt mode - 10 - mOhm ESD HBM stress (6) JS-001-2017 5 - - kV Table 1 - Electrical performances (1): other tolerance available upon request (2): without packaging (3): Lifetime is voltage and temperature dependent, please refer to application note ‘Lifetime of 3D capacitors’ (4): 10 years of intrinsic life time prediction at 100°C continuous operation (5): 10 years of intrinsic life time prediction at 150°C continuous operation (6): please refer to application note ‘ESD Challenge in 3D Murata Integrated Passive technology’

Rev. 2.0 Technical Datasheet Murata Wire Bondable Automotive Vertical SiCap WASC 02065 3.7nF BV150 Wire Bondable Automotive Vertical SiCap WASC 02065 3.7nF BV150 Pinning definition Figure 2 Pinning definition pin # Description

1 Top side

Electrode finishing: Au

2 Back side

Electrode finishing: Ti (0.1 µm)/Ni (0.3µm)/Au (0.2µm) Table 2 - Pining description.

Ordering Information

Murata Integrated Passive Devices delivers products with AQL level II (0.65). Part number (16NC) Die Name Package Packaging Finishing Description 935 247 521 437-F1T WO02065437 6” FFC Au(1) 3.7nF BV150 – 1 bondpad – 0.5 x 1.625mm x 0.25mm 935 247 521 437-T3T WO02065437 T&R 1Kunits(2) Au(1) 3.7nF BV150 – 1 bondpad – 0.5 x 1.625mm x 0.25mm 935 248 521 437-F1T WO02065437 6” FFC Au(1) 3.7nF BV150 – 1 bondpad – 0.5 x 1.625mm x 0.10mm 935 248 521 437-T3T WO02065437 T&R 1Kunits(2) Au(1) 3.7nF BV150 – 1 bondpad – 0.5 x 1.625mm x 0.10mm Table 3 - Packaging and ordering information (1) Au = TiW (0.3µm) / Au (3µm) (2) missing capacitors can reach 0.5%

Rev. 2.0 Murata Integrated Passive Solutions S.A. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. Technical Datasheet Murata Wire Bondable Automotive Vertical SiCap WASC 02065 3.7nF BV150 www.murata.com mis@murata.com Wire Bondable Automotive Vertical SiCap WASC 02065 3.7nF BV150 Definitions Data sheet status Objective specification: This data sheet contains target or goal specifications for product development. Preliminary specification: This data sheet contains preliminary data; supplementary data may be published later. Product specification: This data sheet contains final product specifications. Limiting values Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those given in the Electrical performances sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.

Application information

Where application information is given, it is advisory and does not form part of the specification.

Revision history

Revision Date Description Author Release 2.0 2019 July 28th Product Release LLE Disclaimer / Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Murata customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Murata for any damages resulting from such improper use or sale. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights.