9260AA6

9260AA KISTLER | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 5

Technical content

©2009 ... 2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com Kistler is a registered trademark of Kistler Holding AG. This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Page 1/5 Force Multicomponent Force Plate for Gait and Balance Analysis in Biomechanics, Fz 0 ... 5 kN 9260A_000-729e-02.14 Type 9260AA... This is a reasonably priced multicomponent force plate with aluminum sandwich cover plate for measuring ground reac- tion forces, moments and the center of pressure in gait and balance analysis.

• Excellent center of pressure (COP) accuracy
• Available in two different sizes
• Easy mounting
• Flexible, mobile application
• Versatile installation
• Threshold Fz <250 mN

Description

Multicomponent force plate Type 9260AA... has an anti-slip textured finish and is available in two sizes (300x500 mm and 600x500 mm). Rather than having to be mounted on a frame like conventional force plates, it can simply be used on any flat surface. This drastically cuts installation costs. The walkway solution Type 9418A... allows very cost-effective yet versatile options for installing one or more force plates. Mounting frames are available for permanent or flush instal- lation in the floor. It is also possible to install multiple frames that allow mounting of several force plates and dummies in different arrangements. Despite the very wide measuring range (0 ... 5 kN), this force plate offers outstanding accuracy and linearity over the entire spectrum of applications and guarantees overload protection up to 8 kN for static (and considerably higher for impulse) loads. These piezoelectric 3-component force sensors have very low crosstalk values and in conjunction with the special design principle ensure excellent center of pressure accuracy. Their long-term sensitivity stability makes Kistler force plates a reli- able, cost-effective investment. Technical Data Dimensions Type 9260AA6 mm 600x500x50 Type 9260AA3 mm 298,5x500x50 Measuring range F x, Fy kN –2,5 ... 2,5 Fz kN 0 ... 5 Overload F x, Fy kN –3/3 Fz kN 0/8 Linearity %FSO <±0,5 Hysteresis %FSO <0,5 Crosstalk F Fx, Fy –> Fz % <±2,5 Fz –> Fx, Fy % <±0,5 Max. COP error a x mm ≈2 ay mm ≈2 Natural frequency Type 9260AA6 f n (x, y) Hz ≈400 fn (z) Hz ≈200 Type 9260AA3 f n (x, y) Hz ≈500 fn (z) Hz ≈300 Operating temperature range °C 10 ... 50 Weight Type 9260AA6 kg 8,6 Type 9260AA3 kg 5,5 Degree of protection EN 60529:1992 IP52 Application This force plate is designed specifically for use in gait and bal- ance analyses. Type 9260AA... has a built-in charge amplifier compatible with all of the common motion analysis systems. Type 9260AA6's low weight of just under 9 kg adds flexibility and portability. Force plate Type 9260AA3 (300x500 mm) is also ideal for use on steps.

©2009 ... 2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com Kistler is a registered trademark of Kistler Holding AG. This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Page 2/5 Multicomponent Force Plate – for Gait and Balance Analysis in Biomechanics, 9260A_000-729e-02.14 Technical Data (Cont.) Force Plate with Built-in 8-Channel Charge Amplifier (4 Measuring Ranges) Calibrated partial range F x, Fy kN 0 ... 0,25 Fz kN 0 ... 1 Calibrated range Fx, Fy kN 0 ... 1,25 Fz kN 0 ... 5 Sensitivity range 1 Fxi, Fyi mV/N ≈37,5 Fzi mV/N ≈19,0 Sensitivity range 2 Fxi, Fyi mV/N ≈7,5 Fzi mV/N ≈3,8 Sensitivity range 3 Fxi, Fyi mV/N ≈3,8 Fzi mV/N ≈1,9 Sensitivity range 4 Fxi, Fyi mV/N ≈1,9 Fzi mV/N ≈0,9 Fig. 1: Dimensions of multicomponent force plate Type 9260AA... Dimensions Ratio range 1:2:3:4 1:5:10:201) Threshold mN <250 2) Drift Fx, Fy mN/s <5 Fz mN/s <10 Supply voltage VDC 10 ... 30 Supply current mA ≈45 Output voltage V 0 ... ±5 Output current mA –2 ... 2 Control inputs (optocoupler) V 5 ... 45 mA 0,4 ... 4,4 1) ±0,5 % accuracy 2) range 1 only Conforms to the ä safety standards (73/23/EG) for electrical equipment and systems: EN 60601-1:2005, EN 61010-1:2001 and the EMC standards (89/336/EG): EN 60601-1:2005 (EN 55022 Class B), EN 61000-6-3:2004 (EN 55022 Class B), EN 61000-6-4:2001 (EN 55011 Class B), EN 60601-1:2005, EN 61000-6-1:2001, EN 61000-6-2:2005. D-Sub 25 pin neg. D-Sub 25 pin neg. Anti-slip textured finish Load washer 2 surfaces/90°

©2009 ... 2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com Kistler is a registered trademark of Kistler Holding AG. This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Page 3/5 Multicomponent Force Plate – for Gait and Balance Analysis in Biomechanics, 9260A_000-729e-02.14 D um m y 250 x 300 D um m y 250 x 300 D um m y 250 x 300 D um m y 250 x 300 Type 9260AA6 Type 9260AA3 Type 9418A4 Walkway 1 806x500 Type 9418A7 Walkway 1 203x500 Type 9418A8 Walkway 1 003x600Type 9418A6 Dummy 600x500 Type 9418A3 Dummy 500x300 Type 9418A2 Ramp 600x300 Type 9418A1 Ramp 500x300 Type 9418A5 300x250 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A2 Ramp 600x300 Type 9418A2 Ramp 600x300 Type 9418A2 Ramp 600x300 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A7 Walkway 1 203x500 Type 9418A7 Walkway 1 203x500 Type 9260AA6 Type 9260AA6 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A2 Ramp 600x300 Type 9418A2 Ramp 600x300 Type 9418A2 Ramp 600x300 Type 9260AA6 Type 9260AA6 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A8 Walkway 1 003x600 Type 9418A8 Walkway 1 003x600 Type 9418A2 Ramp 600x300 Type 9418A2 Ramp 600x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A2 Ramp 600x300 Type 9418A2 Ramp 600x300 Type 9418A8 Walkway 1 003x600 Type 9418A8 Walkway 1 003x600 Type 9418A8 Walkway 1 003x600 Type 9418A8 Walkway 1 003x600 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9260AA3 Type 9260AA3 Type 9260AA6 Type 9260AA6 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A7 Walkway 1 203x500 Type 9418A7 Walkway 1 203x500 Type 9418A7 Walkway 1 203x500 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A7 Walkway 1 203x500 Type 9418A7 Walkway 1 203x500 Type 9418A7 Walkway 1 203x500 Type 9260AA3 Type 9260AA6 Type 9260AA6 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A3 Dummy 500x300 Versatile Installation Depending on the area of application, very short or very long step lengths for children or rehabilitation can be measured on the same station. As force plate Type 9260AA... comes two sizes, it can be combined in virtually any way with the available walkway components and mounting frames. This enables the measuring station to be tailored exactly to requirements while remaining flexible to accommodate occasional changes. Walkway Type 9418A... Various elements and dummies are available for assembling a walkway of any required length and width with force plates in different arrangements. To ensure a consistent surface the individual components of the walkway are provided with the same antislip finish as the force plates. Fig. 3: Examples of mounting with walkway Type 9418A... D um m y 250 x 300 D um m y 250 x 300 D um m y 250 x 300 D um m y 250 x 300 Type 9260AA6 Type 9260AA3 Type 9418A4 Walkway 1 806x500 Type 9418A7 Walkway 1 203x500 Type 9418A8 Walkway 1 003x600 Type 9418A6 Dummy 600x500 Type 9418A3 Dummy 500x300 Type 9418A2 Ramp 600x300 Type 9418A1 Ramp 500x300 Type 9418A5 300x250 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A2 Ramp 600x300 Type 9418A2 Ramp 600x300 Type 9418A2 Ramp 600x300 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A7 Walkway 1 203x500 Type 9418A7 Walkway 1 203x500 Type 9260AA6 Type 9260AA6 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A2 Ramp 600x300 Type 9418A2 Ramp 600x300 Type 9418A2 Ramp 600x300 Type 9260AA6 Type 9260AA6 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A8 Walkway 1 003x600 Type 9418A8 Walkway 1 003x600 Type 9418A2 Ramp 600x300 Type 9418A2 Ramp 600x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A2 Ramp 600x300 Type 9418A2 Ramp 600x300 Type 9418A8 Walkway 1 003x600 Type 9418A8 Walkway 1 003x600 Type 9418A8 Walkway 1 003x600 Type 9418A8 Walkway 1 003x600 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9260AA3 Type 9260AA3 Type 9260AA6 Type 9260AA6 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A7 Walkway 1 203x500 Type 9418A7 Walkway 1 203x500 Type 9418A7 Walkway 1 203x500 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A1 Ramp 500x300 Type 9418A7 Walkway 1 203x500 Type 9418A7 Walkway 1 203x500 Type 9418A7 Walkway 1 203x500 Type 9260AA3 Type 9260AA6 Type 9260AA6 Type 9418A4 Walkway 1 806x500 Type 9418A4 Walkway 1 806x500 Type 9418A3 Dummy 500x300 Fig 2: Walkway elements

©2009 ... 2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com Kistler is a registered trademark of Kistler Holding AG. This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Page 4/5 Multicomponent Force Plate – for Gait and Balance Analysis in Biomechanics, 9260A_000-729e-02.14 Mounting Frame Type 9428... Long-term or flush installation in the floor is accommodated by mounting frames Type 9428..., which are permanently bonded to the foundation with a suitable grout. To retain installation flexibility, frames, which allow various mounting options, can also be installed to enable several force plates to be used in a different position, or longitudinally and transversely at the same time, as required. Dummies Types 9418A3 and 9418A6 can then be mounted on the frame instead of force plates of the same size. Type 9260AA3 Type 9260AA3Type 9260AA6 Type 9260AA6 Dummy 250x300 Dummy 250x300 Dummy 250x300 Dummy 250x300 Type 9260AA3 Type 9260AA3 Type 9260AA6 Type 9260AA6 Dummy 250x300 Dummy 250x300 Dummy 250x300 Dummy 250x300 TyTyTyTyTyTTTTTTTTTTTTTTTTTTTTTTTT ypppppppppppe9 60 Type 9260AA6 Type 9260AA6 Type 9260AA6 Type 9260AA6 6666666A666666666 66666 TyTyTyTyTyTyTyTyTyTyyTyTyTTTTTT TyTyTyTyTyTyTyTTTTTTT Type 9260AA3 Type 9260AA3 Type 9260AA6 Type 9260AA6 Dummy 250x300 Dummy 250x300 Dummy 250x300 Dummy 250x300 600000000000000AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA 60AA3AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA Fig. 4: Configurations with frame Type 9428A... using various arrangements of force plates Fig. 5: Mounting frame Type 9428A1 1 006 1 206 141,5 141,5 141,5 141,5 5040 BioWare® BioWare software is the engine behind the force plate system. It collects data from the force plates, converts the trials into useful information and plots the results. BioWare also makes different evaluations of specific aspects of performance available. The fact that the force plates and charge amplifiers are fully remotely controlled by BioWare makes the system extremely flexible and easy to use. Gait Parameters

• Ground reaction force (GRF)
• Center of pressure (COP)
• Frictional torque T z
• Force vector Other Functions
• Moments, coefficient of friction (COF)
• Frequency analysis (FFT), statistics, digital filters
• Acceleration, velocity and displacement of the center of
• mass (COM)
• Work, energy, impulse load, statistics Jump Parameters (e.g. SJ, CMJ, etc,)
• Jump force
• Power
• Jump height (COM)
• Force gradient (explosivity)

©2009 ... 2014, Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland Tel. +41 52 224 11 11, Fax +41 52 224 14 14, info@kistler.com, www.kistler.com Kistler is a registered trademark of Kistler Holding AG. This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Page 5/5 Multicomponent Force Plate – for Gait and Balance Analysis in Biomechanics, 9260A_000-729e-02.14 Typical Measuring Chains Fig. 6: Configuration of a typical measuring chain with Kistler DAQ-System BioWare ® Force plate with charge amplifier Type 9260AA6 Connecting cable Type 1791A... DAQ system (USB 2.0) Type 5691A1 Laptop (provided by user) with BioWare Fig. 7: Configuration of a typical measuring chain with DAQ system provided by user Ch 1 = Fx 1+2 Ch 5 = Fz 1 Ch 2 = Fx 3+4 Ch 6 = Fz 2 Ch 3 = Fy 1+4 Ch 7 = Fz 3 Ch 4 = Fy 2+3 Ch 8 = Fz 4 Force plate with charge amplifier Type 9260AA6 Connecting cable Type 1793A... External Control Unit (8xBNC fem.) Type 5233A2 DAQ system provided by user (8 analog channels) Included Accessories Type/Art. No.

• 1 Shim set 7.050.214
• 1 Voltage equalizing cable 5.590.175 Optional Accessories Type/Art. No. For Type 9260AA... with built-in charge amplifier
• 16ch DAQ system for BioWare (USB 2.0) 5691A1
• 64ch DAQ system for BioWare (USB 2.0) 5695B1
• External control unit (BNC out) 5233A2
• DAQ system for BioWare (PCI Bus) 2812A... BioWare® is a registered trade mark of Kistler Holding AG. Multicomponent force plate Dimensions 300x500 mm 3 Dimensions 600x500 mm 6 Ordering Key Type 9260AA Mounting Options
• Ramp, 500x300 mm 9418A1
• Ramp, 600x300 mm 9418A2
• Dummy, 300x500 mm 9418A3
• Walkway, 1806x500 mm 9418A4
• Dummy, 300x250 mm 9418A5
• Dummy, 600x500 mm 9418A6
• Walkway, 1203x500 mm 9418A7
• Walkway, 1003x600 mm 9418A8
• Mount. frame for 4 x Type 9260AA... 9428A1
• Mount. frame for 2 x Type 9260AA6 (long.) 9428A2
• Mount. frame for 2 x Type 9260AA6 (trans.) 9428A3
• Mount. frame for Type 9260AA6 or 9428A6 2 x Type 9260AA3