9253B KISTLER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

Multicomponent Force Plate –15 ... 30 kN, mounting plate 600x400 mm 9253B_000-146e-07.18 © 2009 ... 2018 Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland protected by various intellectual property rights. For more details visit www.kistler.com This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Quartz multicomponent force plate for mea suring forces and moments. Large measuring range and wide frequency re- sponse.

  • Top plate: aluminum or steel
  • Top plates available with tapped holes or T-slots, too
  • Easy mounting
  • Stable and reliable

Description

The multicomponent force plate consists of four force measu- ring elements. Each element contains a preloaded force sensor. The force sensor contains quartz rings which are mounted between two steel plates in the housing of the sensor. Two quartz rings are sensitive to shear and measure the force components Fx and Fy, while a quartz ring sensitive to pressure measures the component Fz of a force acting in any direc tion on the force plate. The electrical charges proportional to the different components are led via electrodes to the connector contacts. The 12 outputs of the four force measuring elements are con- nected in the summing box so that the 3 force components Fx, Fy, Fz can be measured whereas the 3 moment components Mx, My, Mz can be calculated. The four sensors are mounted ground-isolated. Therefore ground loop problems are largely eliminated. The force plate is corrosion-resistant and protected against pene tration of splashwater and cooling agents. Together with a connecting cable Type 1687B5 or 1677A5 the force plate corresponds to the degree of protection IP67. An apron protects both sensor and cable from mechanical da- mage. Technical data 9253B11/B12 9253B21/22 9253B23 Overload Fx, Fy kN –15/15 –20/20 –15/15 Fz kN –15/30 –20/40 –15/30 Threshold N <0,01 <0,01 <0,01 Sensitivity F x, Fy pC/N ≈–7,8 ≈–7,8 ≈–7,8 Variation of the sensitivity with a force acting within the top plate Fx, Fy, Fz % ±1 ±1 ±1

Applications

  • Dynamic and quasistatic measurement of the three orthogo- nal components of a force.
  • Cutting force mesurements while milling and grinding in larger machines and in machining centers.
  • Measurements on stamping machines.
  • Measurements on wind tunnel models.
  • Measurements of supporting forces on machinery founda- tions.
  • Measurements on rocket propulsion units.
  • Measurements of wheel forces.
  • Measurements of impact forces. Type 9253B...

9253B_000-146e-07.18 © 2009 ... 2018 Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland protected by various intellectual property rights. For more details visit www.kistler.com This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Other technical data 9253B11/12 9253B21/B22 9253B23 Linearity, all ranges %FSO ≤±0,5 ≤±0,5 ≤±0,5 Hysteresis, all ranges %FSO ≤0,5 ≤0,5 ≤0,5 Rigidity cx N/µm ≈625 ≈750 ≈850 c y N/µm ≈650 ≈850 ≈750 cz N/µm ≈250 ≈450 ≈250 Natural frequency fn (x) Hz ≈800 ≈580 ≈610 fn (y) Hz ≈750 ≈550 ≈570 fn (z) Hz ≈850 ≈720 ≈570 Capacitance (each channel) Fx, Fy pF ≈600 ≈600 ≈600 Fz pF ≈600 ≈600 ≈600 Insulation resistance (20 °C) Ω >10 >10 >10 Ground isolation Ω >10 >10 >10 Degree of protection EN60529 IP67 IP67 IP67 Weight kg 40 90 85 600 400 400 240 Fischer DBEE104A055-25 ay Fy Fx ax Fy Fz az 100 ø75 ø18,6 ø13 ø42 ø60 Fig.1: Type 9253B11 (aluminum top plate, smooth)

9253B_000-146e-07.18 © 2009 ... 2018 Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland protected by various intellectual property rights. For more details visit www.kistler.com This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Fig. 2: Type 9253B12 (aluminum top plate with tapped holes) 80 80 80 80 80 80 80808080 600 400 M10 Fig. 3: Type 9253B21 (steel top plate, smooth) 600 400 400 240 Fischer DBEE104A055-25 ay Fy Fx ax Fy Fz az 100 ø75 ø18,6 ø13 ø42 ø60

9253B_000-146e-07.18 © 2009 ... 2018 Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland protected by various intellectual property rights. For more details visit www.kistler.com This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Fig. 4: Type 9253B22 (steel top plate with tapped holes) Fig. 5: Type 9253B23 (steel top plate with T-slots) Mounting The force plate can be fixed with four M12-bolts on a flat, clean mounting surface.

9253B_000-146e-07.18 © 2009 ... 2018 Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland protected by various intellectual property rights. For more details visit www.kistler.com This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. 3-component force measurement Fx, Fy, Fz pos. pos. pos.neg. pos. pos. Dynamometer Type 9253B... Multichannel charge amplifier Type 5080Axx3x001 Connection cable Type 1687B5 Output ±10 V Ch1 Fx Ch2 Fy Ch3 Fz IP67 IP65 IP40 Degree of protection EN60529 Fig. 6: Measuring system for 3-component measurement with multichannel charge amplifier pos. pos. pos.neg. pos. pos. Dynamometer Type 9253B... Laboratory charge amplifier Type 5167A41xK Connecting cable Type 1687B5 IP67 IP65 IP20 Degree of protection EN60529 Fig. 7: Measuring system for 3-component measurement with laboratory charge amplifier Processing the measurement signals Charge amplifier channels are also needed to build a complete measurement signal into an electrical voltage. The measured value is exactly proportional to the force acting. Data acquisition and analysis Kistler offers with the Type 5697A1 DAQ system an universal and easy to operate package, consisting of a hardware for the data acquisition and the DynoWare software. For details see data sheet 5697A_000-745. Output ±10 V Ch1 Fx Ch2 Fy Ch3 Fz Kistler LabAmp measure. analyze. innovate. Kistler Instrumente AG Winterthur Switzerland Made in Switzerland

9253B_000-146e-07.18 © 2009 ... 2018 Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland protected by various intellectual property rights. For more details visit www.kistler.com This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. 6-component measurement Fx, Fy, Fz, Mx, My, Mz pos. pos. pos.neg. pos. pos. Dynamometer Type 9253B... Multichannel charge amplifier Type 5080Axx8x004 Connection cable Type 1677A5 Output ±10 V Ch1 Fx1+2 Ch2 Fx3+4 Ch3 Fy1+4 Ch4 Fy2+3 Ch5 Fz1 Ch6 Fz2 Ch7 Fz3 Ch8 Fz4 IP67 IP65 IP40 Degree of protection EN60529 Fig. 8: Measuring system for 6-component measurement with multichannel charge amplifier Value a,b für Type 9253B...: a mm b mm 240 400 Kistler LabAmp measure. analyze. innovate. Kistler Instrumente AG Winterthur Switzerland Made in Switzerland pos. pos. pos.neg. pos. pos. Dynamometer Type 9253B... Laboratory charge amplifier Type 5167A81xK Connection cable Type 1677A5 Output ±10 V Ch1 Fx1+2 Ch2 Fx3+4 Ch3 Fy1+4 Ch4 Fy2+3 Ch5 Fz1 Ch6 Fz2 Ch7 Fz3 Ch8 Fz4 IP67 IP65 IP20 Degree of protection EN60529 Fig. 9: Measuring system for 6-component measurement with laboratory charge amplifier Value a,b für Type 9253B...: a mm b mm 240 400

9253B_000-146e-07.18 © 2009 ... 2018 Kistler Group, Eulachstrasse 22, 8408 Winterthur, Switzerland protected by various intellectual property rights. For more details visit www.kistler.com This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Aluminum top plate smooth 11 with tapped holes 12 Steel top plate smooth 21 with tapped holes 22 with T-slots 23 Ordering key Type 9253B Ordering code Type/Art. No.

  • Multicomponent dynamometer 9253B... up to 30 kN, cover plate 600x400 mm Typical measuring chain with DAQ system Type 5697A1 Dynamometer Connection cable, high impedance Charge amplifier Connecting cable DAQ system Notebook (from customer side) with DynoWareType 9253B... Type 16xx Type 5080A Type 1700A111A2 Type 5697A1 Type 1200A27 Typical measuring chain with LabAmp system Type 5167A... Dynamometer Connection cable, high impedance Charge amplifier with integrated DAQ Notebook (from customer side) with DynoWare Type 9253B... Type 16xx Type 5167A… Optional accessories Type/Art. No. For 3-component force measurement Fx, Fy, Fz
  • Connecting cable, 3 wire, with flexible 1687B5 metal sheath (L = 5 m)
  • Connecting cable, 3 wire, steel braided, 1687BQ02 flexibel (L = 5 m)
  • Extension cable, 3 wire, 1688B5 high insulation (L = 5 m)
  • Connecting cable, 3 wire, with flexible 1689B5 metal sheath and angle connector (L = 5 m) For 6-component force and moment measurement Fx, Fy, Fz / Mx, My, Mz
  • Connecting cable, 8 wire, with flexible 1677A5 metal sheath (L = 5 m)
  • Connecting cable, 8 wire, with steel braided, 1677AQ02 flexibel (L = 5 m)
  • Extension cable, 8 wire, 1678A5 high insulation (L = 5 m)
  • Connecting cable, 8 wire, with flexible 1679A5 metal sheath and angle connector (L = 5 m)