9212M KISTLER | Alldatasheet
Document overview
- Manufacturer or author: Kistler Instrument Corp.
- PDF pages: 2
Technical content
Tel 716-691-5100, Fax 716-691-5226, sales.us@kistler.com, www.kistler.com Kistler is a registered trademark of Kistler Holding AG. This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Page 1/2 Force Quartz Load Cell High Impedance Load Cell 9212_000-418a-02.15 Type 9212 Ø 0.70 0.625 HEX. 0.500 0.50 0.125 0.380 Ø 0.375 10-32 THREAD COAXIAL CONN. 10-32 THD. x 0.10 DEEP MIN. MOUNTING HOLE 10-32 THD. x 0.10 DEEP MIN. MOUNTING HOLE Ø IMPACT PAD FOR TYPE 9212M1 Dimensions Type 9212 is a force loading cell that measures quasi-static and dynamic events in a wide variety of applications. Type 9212 has a 50 pC/lbf sensitivity.
- High impedance, charge mode
- Rugged quartz force-sensing element guarantees long-term stability
- Wide measuring ranges for compression and tension
- Quasi-static response
Description
Type 9212 quartz load cell provides an exceptional sensitivi - ty and threshold while retaining the capability to measure fast dynamic events and perform short-term (quasi-static) measure - ments. This piezoelectric sensor is capable of measuring com - pression forces from less than 1 lb of force to 5,000 lbf, with tension forces up to 500 lbf. Minute incrementatl forces may be measured at any level in these ranges through the elimination of static or tare weight component. The load cell features high rigidity and is capable of withstanding compression overloads of 20 %. The quartz sensing element of the Type 9212 load cell is contained in a low profile housing configured in a 5/8 Hex. The distinguishable feature of this sensor is the 50 pC/lbf sensitiv - ity, making it ideally suited for low level force measurements. Type 9212 is also available in an M1 version, which adds an impact cap to the top surface of the cell allowing it to be used for impact-force measurements. Application The Type 9212 quartz load cell is ideal for direct force measure- ments in process control applications, such as press-fit assembly, crimping, riveting and impact force testing. It can also be used with shakers for modal analysis, in machine tool measurements, or in various automotive, aerospace and robotic testing.
Tel 716-691-5100, Fax 716-691-5226, sales.us@kistler.com, www.kistler.com Kistler is a registered trademark of Kistler Holding AG. This information corresponds to the current state of knowledge. Kistler reserves the right to make technical changes. Liability for consequential damage resulting from the use of Kistler products is excluded. Page 2/2 High Impedance Load Cells, Type 9212 9212_000-418a-02.15 Mounting Reliable and accurate measurements require that the mount - ing surface be clean and flat. Type 9212 is supplied with two 10-32 mounting studs for attachment to the test structure. When several units are installed between two plates, the mount- ing surfaces in contact with the cells must be plain-parallel to prevent stresses induced into the individual cells. The operating instruction manual for Type 9212 provides detailed information regarding mounting surface preparation.
Related Products
Type 9712B... low impedance, voltage mode sensor. Accessories Included Type
- (2) 10-32 mounting studs 8402 Optional Accessories Type
- Impact pad 900A1 Ordering Key Type 9212 Variants Standard – With impact cap M1 Measuring Chain Type
1 Load cell, 50 pC/lbf 9212
or load cell with Type 900A1 impact force cap 9212M1 2 Low noise cable, 10-32 pos. to BNC pos. 1631Asp or premium low noise cable, 10-32 pos. to BNC pos. 1631Csp
3 Series charge amplifier 5000
4 Output cable, BNC pos. to BNC pos. 1511sp AMERICAN GERMAN 4 item system 5050 system 5050 system Read-out (not supplied) Auswertung (nicht mitgeliefert) 1 2 3 4 5 6 1 2 3 4 1 2 3 4 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 1 2 3 4 5 Readout (not supplied) Readout (not supplied) Auswertung (nicht mitgeliefert) Auswertung (nicht mitgeliefert) Technical Data Type Number Unit 9212 Measuring range Compression lbf 5,000 Tension lbf 500 Maximum force lbf 6,000 Compression lbfrms 0.001 Sensitivity, nom. pC/lbf –50 Non-linearity nom. (max. 1 %) %FSO ±0.5 Rise time 10 ... 90 % μs <6 Capacitance pF 58 Rigidity lbf/μin >5 Natural frequency nom. (no load) kHz 70 Environmental Shock limit (1 ms pulse) max. gpk <10,000 Temperature coeff. of sensitivity %/°F 0.01 Operating temperature range °F –400 ... 300 Insulation resistance @ room temp. Ω 1013 Construction Sensing element type quartz Sealing - housing/connector type welded/epoxy Connector material 10-32 neg. Housing/base grams 17-4 PH Weight lbf-in 19 Mounting Mounting Torque lbf-in 18 1 g = 9.80665 m/s2, 1 in = 25.4 mm, 1 Gram = 0.03527 oz, 1 lbf-in = 0.113 N·m