175285-3 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Dynamic Series Connectors/D-3000 Series D-3 Contact and Application Tooling Crimp Type oN SQ Receptacle Contact “~~ a—- Tab Contact (Used on Receptacle Housing) (Used on Tab Housing) Contact Part Number Application Tooling Part Number Wire Range | Wire Wire —~ cootacle Conta, —— or \\ R Receptacle Contact ; \\ —_— Ins. ange: — oe Tab Mini-Appli- Standard contact High contact AWG mm? | Diameter | Mark (Only-28-3 | (pressure-2, -3,| Contact cator Hand Too! 1 available) &-5 available) 2% 008 og 42 ST.) 175194-0 4-175194-01 175284-0 1276659-1 — 26 0.12 : | SF ~ — 24 0.20] 1.0~1.4 LP. 175216-1 1-175216-1 175287-D — 91565-1 24 0.20 | 1.2~1.6 st.| 175195-0 4-175195-0 | 175285-(1 9374724 | = — : 20 0.50 LP. 175217-0 1-175217-0 175288-0) —_ 91559-1 4 20 0.50) ig og ist, 175196-C_ | 1-175196-C. , 175286-C + 1385001-2 — 16 1.28 | 22-26 LP. 175218-0 1-175218-0 | 175289-01 — 91558-1 16 1.25 22-28 OL st. 917484-1) 1-917484-1) 917485-1) | 1276662-1 — 14220 “9 | [ip on7s11-0 1-917511-0_ | 917512-0 — 91560-1 16 125] 31-33) [ST] 989715-0 1-353715-0 | 353716-0 | 937269-2 — 142.20] 33~3.4| ~ 353717-0 1-353717-0 | 353718-0) 91561-1 Note : *Enter the following plating code in Part Number suffix 2 Minimum order quantity is provided. When ordering. specify your 2 = 0.38, thick gold plating requirements by multiplying the quantity. 3 = 0.761 thick gold plating 2Minimum order quantity for tooling is one. ‘6 = Tin plating °Mini-Applicators are for use with automachines. *Solder-type Contact : We do not manufacture solder-type For more information, contact our Sales Department.) contacts for any specific application. *Strip Form contacts are for use with Mini-Applicators (automachines) and Loose-Piece contacts are for Hand tools. Hand Tools The crimping section incorporates Straight Action construction for improved reliability as with automachine. _f “part No.: See the Chart —— Minimum order guantiy:1 Uses For General Production Gan it be used for tool repairing? Yes Approximately how many times of 50,000 crimping can be performed? , 447 rr