INTERFACEUNITS WEIDMULLER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 17
Technical content
Datasheet sections
Weidmuller interface units Introduction Given the need to reduce costs in electrical cabinet construction, interface units offer an alternative to wiring concepts with point-to-point wiring. The prime function of interface units is to act as a trouble-free adapter element between standardized plug connectors and point-to-point wiring or other connection systems. Interface units consist of the following individual components: Extruded profile for inserting the PCB End plates for fitting on the mounting rail Clip-on feet for locking on standardized mounting rails TS 32 and TS 35 PCB with connecting and indicating elements, DIN plug connectors and ample marking facilities for equipment identification The plug connectors used for the interface units can be divided into the following groups: Plug connector to IEC 603-1/DIN 41651 Sub-miniature plug connectors (SUB-D) to IEC 807-2/ DIN 41652 Plug connectors for PCBs to IEC 603/DIN 41612 and DIN 41615 ELCO plug connectors for hazardous area applications Pre-assembled leads with the corresponding plug connector systems are used as the connection between the series- connected controller and the interface unit. This provides the greatest savings for the user. The use of interface units reduces the individual circuitry, which reduces labor and installation time and also hidden costs, in particular a reduction material costs following a reduction in the number of individual cables and leads, cable ducts, terminals and terminal blocks required. The transition to point-to-point wiring takes place directly at the interface element. Users have a choice between screw, tension clamp or spade connections for connecting actuators and/or sensors. As an option, interface units can also integrate additional functions such as status indicator, signal disconnector, fuses or shielding. Identification systems make it easier to trace the signals to the corresponding element. A Interface Units Advantages of the interface units: Two- and three-tier PCB terminals save space Conventional point-to-point wiring only needed on one side, thus saving costs Greater safety, preventing wiring errors Optional: status LED on the interface units Rapid troubleshooting with additional test and measuring devices Simplified setup and documentation Interface units let users implement pioneering concepts in switchboard design with potential for rationalization. Customized wiring concepts can also be solved rationally through the use of special interface units. RSF interface units for pre-assembled leads with plug connectors to IEC 603-1/DIN 41651 Passive interface for 10 … 64 signals for adapting pre- assembled leads with plug connectors to IEC 603-1 / DIN 41651 to screw or tension clamp connection systems. When used in combination with a status indicator (LED), this guarantees rapid information about the switching state of incoming and outgoing signals. A.2
RSSD interface units for pre-assembled leads with SUB-D plug connectors to IEC 807-2/DIN 41652 Passive interface unit for 9 … 50 signals for adapting pre- assembled leads with SUB-D plug to IEC 807-2/DIN 41652 to screw or tension clamp connection systems. The components are supplied with either female or male connectors. A spacer block between plug connector and PCB cushions the mechanical forces occurring between the connected cables. RSSD interface units can be supplied with an ground terminal for shielded leads as an optional feature. An additional test point simplifies testing and measuring during initial setup and when servicing the system. RS VERT interface units as voltage distributor Passive interface units for the distribution of dc supply voltage. These interface units are available in three designs for distribution to 8, 16 and 72 connections, for positive and negative voltages in each case: 8x and 16x distributor just 45 mm wide overall, 72x distributor 100 mm wide Fed by two connection elements for positive and negative voltages in each case Fits on TS32/35 mounting rails RS VERT voltage distributors can also be used in small enclosures and provide clearly organized distribution. RS ELCO interface units for pre-assembled leads with hermaphrodite plug connector system Weidmuller’s passive interface units are used for adapting hermaphrodite ELCO multi-pole connectors, for input and output, to screw terminal systems. The hermaphrodite contact is a fork-type contact that is identical in design on both sides of the connection, but with one fork turned through 90° to engage with the other. RS RJ45 interface units for connecting data lines The RS RJ45 interface module offers the user a convenient, easy-to-use interface for connecting modems, notebooks and other office equipment in the electrical cabinet. The module converts the standard RJ45 connection to a screw terminal system or acts as a coupling to connect data leads by means of two RJ45 sockets. For data transmission rates of up to 100 Mbps, it is advisable to connect one end of the shield of the data cable to a protective ground. The interface modules can be fitted on TS 32/35 mounting rails. A Interface Units A.3
A.4 A Interface Units Weidmuller Custom Solutions Introduction And because our success at Weidmuller rests on long-term relationships, we welcome opportunities to partner with you to create the products you need. Weidmuller is your best source for PCB terminal blocks and connectors, DIN-rail terminal blocks, controller front panel adapters and interface products that meet your application needs precisely. We work with you to manage the process carefully to ensure timely delivery and complete satisfaction. It’s a Matter of Getting what you need Custom Design and Engineering – Designed for Your Application Great ideas for new products and new applications often push companies into uncharted territory, where existing interface products fall short of their design requirements. Weidmuller has an unparalleled record of innovation in interface products extending back over 50 years – and we’re happy to make this expertise available to you through our custom engineering services, which include both the design and the manufacture of tailor-made interface products. Whether it’s PCB terminal blocks and connectors, DIN-rail terminal blocks, controller front panel adapters or controller interface products, we will work with you to create a custom solution that meets your needs – exactly. Our design team works closely with you each step of the way. Our goal is to provide you with the most responsive service possible. With Weidmuller’s expertise in custom solutions, there is no need to compromise.
A.5 A Interface Units Introduction 1) Getting it Right from the Start Once an application is identified, we mobilize our design team immediately. We work with you to pinpoint your design specifications, delivery and scheduling requirements. As part of this effort, we establish an open line of communication between you and a designated point person for your project. Expert technical support is also available all the way through the project to address issues that arise during the design and manufacturing process. 2) Building Relationships Before Building the Product At Weidmuller, we place a premium on building long-term customer relationships. We will explain our custom design and en- gineering process in detail, and, as needed, partner with you to meet your needs for custom products. 3) Offering Alternatives One of the advantages of working with Weidmuller is the depth of our product design and manufacturing experience. You can count on us to carefully review the special requirements for your applica - tion and, if necessary, present several approaches and to compare the advan- tages of each one. 4) Developing Final Drawings and Models At Weidmuller, we want to make absolutely sure that a custom product design meets your requirements. Using the latest CAD technology, we create final design drawings and stereolithographic models, as appropriate. 5) Establishing Time Frames Upon your approval, we begin the tooling process, schedule production, and set delivery dates based on the needs of your application. Our Fastrack Custom Solutions can accelerate the custom design and engineering process even further. In many cases, we will produce conceptual drawings for you within two days of project agreement. OUR FASTRACK CUSTOM SOLUTIONS ARE THE RIGHT TRACK FOR YOUR PRODUCT DEVELOPMENT NEEDS WHEN: ■ Standard products won’t meet your unique application need ■ You need a design partner to offer innovative alternatives and solutions ■ You need a truly innovative product to put you ahead of the competition ■ Market pressures dictate a fast turnaround on a custom product design Final design drawings are developed for review and approval. We work with you to pinpoint schedule and delivery requirements.
A.6 A Interface Units Interface units IEC 603-1 DIN 41651 (Ribbon connector) Pin connector with locking feature to IEC 603-1 Tension clamp or screw connection system 45 or 87 mm wide For mounting on TS32, TS35 x 7.5 and TS35 x 15Technical data Connection data Connection on process side Stripping length Connection on control side 03-1/ DIN 41651 Rated data Conversion PCB/plug connector Rated voltage DC Rated current per connection T est voltage (~eff) Test torque Storage temperature Ambient temperature (operational) Terminal rail Insulation coordination (EN 50178) Surge category Pollution severity Approvals Standards Clamping range (rating- / min. / max.) mm2 Length x width x height mm Note Ordering data 10-pole 14-pole 16-pole 20-pole 26-pole 34-pole 40-pole 50-pole 60-pole 64-pole Note Accessories Note Interface Units IEC 603-1 - DIN 41651 (Ribbon Connector) RSF Z/ IEC 603-1 71.1 67.6 63.6 Connection data PCB terminal LM2NZF / Tension clamp 7.0 mm ing length Plug-in connector to IEC 603-1/ DIN 41651 Rated data 1:1 ersion PCB/plug connector
60 V AC/ 75 V DC
1 A ed current per connection
1.0 kV oltage (~eff) Test torque -40 °C…+70 °C ure 0 °C…+55 °C ature (operational) Terminal rail Insulation coordination (EN 50178) III e category 2 llution severity Approvals EN 50178 1.5 / 0.5 / 2.5 87.0 x — x 64.0 Type Width Order No. RS F10 Z 50.0 mm 8537190000 RS F14 Z 50.0 mm 8537200000 RS F20 Z 65.0 mm 8537110000 RS F26 Z 80.0 mm 8537180000 RS F34 Z 110.0 mm 8537130000 RS F40 Z 115.0 mm 8537140000 RS F50 Z 145.0 mm 8537150000 RSF S 45 mm/ IEC 603-1 135791 1 24681 0 p p 65.5 Connection data PCB terminal LPK 2 H / Screw connection 7.0 mm ing length Plug-in connector to IEC 603-1/ DIN 41651 Rated data 1:1 ersion PCB/plug connector 1.0 kV oltage (~eff)
0.40 Nm rque
-40 °C…+70 °C ure 0 °C…+55 °C ature (operational) TS 35 al rail Insulation coordination (EN 50178) III e category 2 llution severity Approvals EN 50178 1.5 / 0.5 / 2.5 45.0 x — x 65.5 Type Width Order No. RS F10 LPK 2H/12 49.0 mm 8155610000 RS F14 LPK 2H/16 56.0 mm 8258980000 RS F16 LPK 2H/18 64.0 mm 8265540000 RS F20 LPK 2H/22 71.0 mm 8155600000 RS F26 LPK 2H/28 86.0 mm 8213470000 RS F34 LPK 2H/36 106.0 mm 8155590000 RS F40 LPK 2H/42 121.0 mm 8155580000 RS F50 LPK 2H/52 150.3 mm 8155570000 RS F60 LPK 2H/62 180.0 mm 8259000000 RS F64 LPK 2H/66 186.0 mm 8155550000
A.7 A Interface Units Interface Units IEC 603-1 - DIN 41651 (Ribbon Connector) 70 mm A 1 3 5 7 9 1 11 31 5 2 4 6 8 10 12 14 16 70 mm A 1 3 5 7 9 1 11 31 5 2 4 6 8 10 12 14 16 For ribbon cable connections according to UL 508A recognition or with accessory holes With mounting foot for TS 32, TS 35 x 7.5 and TS 35 x 15 rails Male connector block with interlock for female connector block with strain relief according to DIN 41 651/Parts 1 and 2 Available with screw connection Connection data - Process side - Type - Control side - Type Rated data Rated voltage Rated current per contact Operating temperature Storage temperature Terminal wire size Insulation stripping length mm (in.) Dimensions Overall width mm (in.) dimensions (mm/in.) Poles Dim. A Dim. B Dim. C Dim. D 30 94.74 (3.73) On TS 35 x 7.5 Mounting rail End bracket for TS 32 for TS 35 Terminal wire marking RI-IDC Cable interface units for ribbon cables Screw connection Male Standard RI-IDC Cable interface units for ribbon cables Screw connection Male with accessory holes Screw connection LP2N terminal Plug connection Ribbon connector 125 V 1 A -25°C…+50°C -40°C…+70°C AWG 26…12 7 (.28) See table, dim. A Type Order No. UL 508A—Male standard RI-IDC 10 915911 RI-IDC 14 915912 RI-IDC 16 915913 RI-IDC 20 915914 RI-IDC 26 915915 RI-IDC 30 915916 RI-IDC 34 915917 RI-IDC 40 915918 RI-IDC 50 915919 RI-IDC 60 915920 RI-IDC 64 915921 Type Order No. TS 32 0122800000 TS 35 x 7.5 0383400000 TS 35 x 15 0498000000 EWK 2 0199360000 EW 35 0383560000 DEK 5 Screw connection LP2N terminal Plug connection Ribbon connector 125 V 1 A -25°C…+50°C -40°C…+70°C AWG 26…12 7 (.28) See table, dim. A Type Order No. Male w/ accessory holes RI-IDC 10 914890 RI-IDC 14 914891 RI-IDC 16 914892 RI-IDC 20 914893 RI-IDC 26 914894 RI-IDC 30 914895 RI-IDC 34 914896 RI-IDC 40 914897 RI-IDC 50 914898 RI-IDC 60 914899 RI-IDC 64 914900 Type Order No. TS 32 0122800000 TS 35 x 7.5 0383400000 TS 35 x 15 0498000000 EWK 2 0199360000 EW 35 0383560000 DEK 5 Technical data Ordering data Accessories
A.8 A Interface Units Interface units IEC 603-1 DIN 41651 (Ribbon connector) Pin connector with locking feature to IEC 603-1 Screw connection system 87 mm wide For mounting on TS32, TS35 x 7.5 and TS35 x 15Technical data Connection data Connection on process side Stripping length Connection on control side 03-1/ DIN 41651 Rated data Conversion PCB/plug connector Rated voltage DC Rated current per connection T est voltage (~eff) Test torque Storage temperature Ambient temperature (operational) Terminal rail Insulation coordination (EN 50178) Surge category Pollution severity Approvals Standards Clamping range (rating- / min. / max.) mm2 Length x width x height mm Note Ordering data 10-pole 14-pole 16-pole 20-pole 26-pole 34-pole 40-pole 50-pole 60-pole 64-pole Note Accessories Note Interface Units IEC 603-1 - DIN 41651 (Ribbon Connector) RSF S/ IEC 603 -1 Connection data PCB terminal LP2N ess side 7.0 mm ing length Plug-in connector to IEC 603-1/ DIN 41651 Rated data 1:1 ersion PCB/plug connector 1.0 kV oltage (~eff)
0.50 Nm rque
-40 °C…+60 °C ure 0 °C…+55 °C ature (operational) TS 32, TS 35 Insulation coordination (EN 50178) III e category 2 llution severity Approvals EN 50178 2.5 / 0.5 / 4 87.0 x — x 70.0 Type Width Order No. RS F10 LP2N 5/10 50.0 mm 0224961001 RS F14 LP2N 5/14 50.0 mm 0225061001 RS F16 LP2N 5/16 55.0 mm 0225161001 RS F20 LP2N 5/20 65.0 mm 0224261001 RS F26 LP2N 5/26 80.0 mm 0224861001 RS F34 LP2N 5/34 110.0 mm 0224361001 RS F40 LP2N 5/40 115.0 mm 0224461001 RS F50 LP2N 5/50 145.0 mm 0224561001 RS F60 LP2N 5/60 180.0 mm 0224661001 RS F64 LP2N 5/64 180.0 mm 0224761001 RSF S/ IEC 603-1 Connection data PCB terminal LP3R ess side 7.0 mm ing length Plug-in connector to IEC 603-1/ DIN 41651 Rated data 1:1 ersion PCB/plug connector 1.0 kV oltage (~eff) -40 °C…+70 °C ure 0 °C…+55 °C ature (operational) TS 32, TS 35 Insulation coordination (EN 50178) III e category 2 llution severity Approvals EN 50178 2.5 / 0.5 / 4 87.0 x — x 76.0 Type Width Order No. RS F10 LP3R 3/12 40.0 mm 8012850000 RS F14 LP3R 3/14 45.0 mm 8012860000 RS F16 LP3R 3/18 50.0 mm 8012870000 RS F20 LP3R 3/21 50.0 mm 8012910000 RS F26 LP3R 3/27 55.0 mm 8012920000 RS F34 LP3R 3/36 70.0 mm 8012930000 RS F40 LP3R 3/42 80.0 mm 8012940000 RS F50 LP3R 3/51 95.0 mm 8012950000 RS F60 LP3R 3/63 115.0 mm 8012960000 RS F64 LP3R 3/66 120.0 mm 8012970000
A.9 A Interface Units 70 mm A S S 2037 19 1 1 9 1 8 1 7 1 6 1 5 1 4 1 3 1 2 1 1 1 0987654321 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 S MALE FEM RD 37 70 mm A S S 2037 19 1 1 9 1 8 1 7 1 6 1 5 1 4 1 3 1 2 1 1 1 0987654321 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 S MALE FEM RD 37 For D-subminiature plug-in connectors according to UL 508A recognition With mounting foot for TS 32, TS 35 x 7.5 and TS 35 x 15 rails Male and female connectors with screw/locking system UNC 4/40 Available with screw connection Connection data - Process side - Type - Control side - Type Rated data Rated voltage Rated current per contact Operating temperature Storage temperature Terminal wire size Insulation stripping length mm (in.) Dimensions Overall width mm (in.) dimensions (mm/in.) Poles Cable Connector Retainer* Dim. A 9 Screw 39.88 (1.57) 9 Jackscrew 39.88 (1.57) 15 Screw 55.12 (2.17) 15 Jackscrew 55.12 (2.17) 25 Screw 85.09 (3.35) 25 Jackscrew 85.09 (3.35) 37 Screw 116.84 (4.60) 37 Jackscrew 116.84 (4.60) 50 Screw 149.35 (5.88) 50 Jackscrew 149.35 (5.88) On TS 35 x 7.5 Mounting rail End bracket for TS 32 for TS 35 Terminal wire marking RD Male connector Standard RD Female connector Standard Screw connection LP2N terminal Plug connection Sub-D 150 V 1.5 A -25°C…+50°C -40°C…+70°C AWG 26…12 7 (.28) See table, dim. A Type Order No. UL 508A—Male standard RD-9 915933 RD-9JS 915935 RD-15 915958 RD-15JS 915941 RD-25 915947 RD-25JS 915949 RD-37 915954 RD-37JS 915956 RD-50 919658 RD-50JS 919656 Type Order No. TS 35 x 7.5 0383400000 TS 35 x 15 0498000000 EWK 2 0199360000 EW 35 0383560000 DEK 5 Screw connection LP2N terminal Plug connection Sub-D 150 V 1.5 A -25°C…+50°C -40°C…+70°C AWG 26…12 7 (.28) See table, dim. A Type Order No. UL 508A—Female standard RD-9 915934 RD-9JS 915936 RD-15 915940 RD-15JS 915942 RD-25 915948 RD-25JS 915953 RD-37 915955 RD-37JS 915957 RD-50 919657 RD-50JS 919655 Type Order No. TS 35 x 7.5 0383400000 TS 35 x 15 0498000000 EWK 2 0199360000 EW 35 0383560000 DEK 5 Technical data Ordering data Accessories Interface Units IEC 807-2 - DIN 41652 (Sub-D Connector) *Cable connector retainer has either a jackscrew receptacle for a thumb screw or has a mounted screw in the module cable connector. Note :
A.10 A Interface Units Interface Units IEC 807-2 - DIN 41652 (Sub-D Connector) 70 mm A S S 2037 19 1 1 9 1 8 1 7 1 6 1 5 1 4 1 3 1 2 1 1 1 0987654321 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 S MALE FEM RD 37 70 mm A S S 2037 19 1 1 9 1 8 1 7 1 6 1 5 1 4 1 3 1 2 1 1 1 0987654321 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 S MALE FEM RD 37 For D-subminiature plug-in connectors with accessory holes With mounting foot for TS 32, TS 35 x 7.5 and TS 35 x 15 rails Male and female connectors with screw/locking system UNC 4/40 Available with screw connection Connection data - Process side - Type - Control side - Type Rated data Rated voltage Rated current per contact Operating temperature Storage temperature Terminal wire size Insulation stripping length mm (in.) Dimensions Overall width mm (in.) dimensions (mm/in.) Poles Cable Connector Retainer* Dim. A 9 Screw 39.88 (1.57) 9 Jackscrew 39.88 (1.57) 15 Screw 55.12 (2.17) 15 Jackscrew 55.12 (2.17) 25 Screw 85.09 (3.35) 25 Jackscrew 85.09 (3.35) 37 Screw 116.84 (4.60) 37 Jackscrew 116.84 (4.60) 50 Screw 149.35 (5.88) 50 Jackscrew 149.35 (5.88) On TS 35 x 7.5 Mounting rail End bracket for TS 32 for TS 35 Terminal wire marking RD Male connector with accessory holes† RD Female connector with accessory holes† Screw connection LP2N terminal Plug connection Sub-D 150 V 1.5 A -25°C…+50°C -40°C…+70°C AWG 26…12 7 (.28) See table, dim. A Type Order No. Male w/ accessory holes RD-9 912385 RD-9JS 910638 RD-15 912395 RD-15JS 910644 RD-25 912405 RD-25JS 910648 RD-37 913155 RD-37JS 910642 RD-50 911883 RD-50JS 911884 Type Order No. TS 35 x 7.5 0383400000 TS 35 x 15 0498000000 EWK 2 0199360000 EW 35 0383560000 DEK 5 Screw connection LP2N terminal Plug connection Sub-D 150 V 1.5 A -25°C…+50°C -40°C…+70°C AWG 26…12 7 (.28) See table, dim. A Type Order No. Female w/ accessory holes RD-9 912380 RD-9JS 910641 RD-15 912390 RD-15JS 912393 RD-25 912400 RD-25JS 910645 RD-37 910075 RD-37JS 910640 RD-50 911885 RD-50JS 911886 Type Order No. TS 35 x 7.5 0383400000 TS 35 x 15 0498000000 EWK 2 0199360000 EW 35 0383560000 DEK 5 Technical data Ordering data Accessories *Cable connector retainer has either a jackscrew receptacle for a thumb screw or has a mounted screw in the module cable connector. †Designates plug (S male) or socket (B female) connector on the interface module. Note :
A.11 A Interface Units Interface units IEC 807-2 DIN 41652 (Sub-D connector) Pin and socket connector with screw locking system UNC 4/40 Tension clamp or screw connection system 45 or 87 mm wide For mounting on TS32, TS35 x 7.5 and TS35 x 15 Technical data Connection data Connection on process side Stripping length Connection on control side Rated data Conversion PCB/plug connector Rated voltage V DC Rated current per connection T est voltage (~eff) Test torque Storage temperature Ambient temperature (operational) Terminal rail Insulation coordination (EN 50178) Surge category Pollution severity Approvals Standards Clamping range (rating- / min. / max.) mm2 Length x width x height mm Note Ordering data Male connectors 9-pole Male connectors 15-pole Male connectors 25-pole Male connectors 37-pole Male connectors 50-pole Female connectors 9-pole Female connectors 15-pole Female connectors 25-pole Female connectors 37-pole Female connectors 50-pole Note Accessories Note Interface Units IEC 807-2 - DIN 41652 (Sub-D Connector) RSSD Z/ SUB-D 71.1 67.6 63.6 SL1 SL1 Connection data PCB terminal LM2NZF / Tension clamp 7.0 mm ing length D-SUB acc. IEC 807-2 side Rated data 1:1 ersion PCB/plug connector
125 V AC/ 150 V DC
1.5 A current per connection
0.6 kV Test voltage (~eff) Test torque -40 °C…+70 °C ure 0 °C…+55 °C ature (operational) TS 35 - TS 32 Terminal rail Insulation coordination (EN 50178) III e category 2 llution severity Approvals EN 50178 1.5 / 0.5 / 2.5 87.0 x — x 63.6 Type Width Order No. RS SD9 SZ 45.0 mm 8537260000 RS SD15 SZ 60.0 mm 8537390000 RS SD25 SZ 80.0 mm 8537370000 RS SD37 SZ 110.0 mm 8537240000 RS SD50 SZ 145.0 mm 8537350000 RS SD9 BZ 45.0 mm 8537320000 RS SD15 BZ 60.0 mm 8537400000 RS SD25 BZ 80.0 mm 8537380000 RS SD37 BZ 110.0 mm 8537250000 RSSD S/ SUB-D 12 34 5 6 p p g 65.5 Connection data PCB terminal LPK 2 H / Screw connection 7.0 mm ing length D-SUB acc. IEC 807-2 side Rated data 1:1 ersion PCB/plug connector 0.6 kV oltage (~eff) -40 °C…+70 °C ure 0 °C…+55 °C ature (operational) TS 35 al rail Insulation coordination (EN 50178) III e category 2 llution severity Approvals EN 50178 1.5 / 0.5 / 2.5 45.0 x — x 65.5 Type Width Order No. RS SD9S UNC LPK2 50.0 mm 8259010000 RS SD15S UNC LPK2 61.0 mm 8233350000 RS SD25S UNC LPK2 86.0 mm 8155650000 RS SD37S UNC LPK2 116.0 mm 8155660000 RS SD50S UNC LPK2 154.0 mm 8155670000 RS SD9B UNC LPK2 50.0 mm 8216480000 RS SD15B UNC LPK2 61.0 mm 8209730000 RS SD25B UNC LPK2 86.0 mm 8155620000 RS SD37B UNC LPK2 116.0 mm 8155630000 RS SD50B UNC LPK2 154.0 mm 8155640000
A.12 A Interface Units Interface units IEC 807-2 DIN 41652 (Sub-D connector) Pin and socket connector with screw locking system UNC 4/40 PCB connection element with screw connection Clip-on foot for mounting on TS32, TS35 x 7.5 and TS35 x 15 Technical data Connection data Connection on process side Stripping length Connection on control side Rated data Conversion PCB/plug connector Rated voltage V DC Rated current per connection T est voltage (~eff) Test torque Storage temperature Ambient temperature (operational) Terminal rail Insulation coordination (EN 50178) Surge category Pollution severity Approvals Standards Clamping range (rating- / min. / max.) mm2 Length x width x height mm Note Ordering data Male connectors 9-pole Male connectors 15-pole Male connectors 25-pole Male connectors 37-pole Male connectors 50-pole Female connectors 9-pole Female connectors 15-pole Female connectors 25-pole Female connectors 37-pole Female connectors 50-pole Note Accessories Note Interface Units IEC 807-2 - DIN 41652 (Sub-D Connector) RSSD S/ SUB-D Connection data PCB terminal LP2N ess side 7.0 mm ing length D-SUB acc. IEC 807-2 side Rated data 1:1 ersion PCB/plug connector 0.6 kV oltage (~eff) -40 °C…+70 °C ure 0 °C…+55 °C ature (operational) TS 32, TS 35 Insulation coordination (EN 50178) III e category 2 llution severity Approvals EN 50178 2.5 / 0.5 / 4 87.0 x — x 76.0 Type Width Order No. RS SD9S UNC 4.40 LP2N 45.0 mm 8003901001 RS SD15S UNC 4.40 60.0 mm 8005201001 RS SD25S UNC 4.40 LP2N 80.0 mm 8005181001 RS SD37S UNC 4.40 LP2N 110.0 mm 8003881001 RS SD50S UNC 4.40 LP2N 154.0 mm 8005161001 RS SD9B UNC 4.40 LP2N 45.0 mm 8003911001 RS SD15B UNC 4.40 LP2N 60.0 mm 8005211001 RS SD25B UNC 4.40 LP2N 80.0 mm 8005191001 RS SD37B UNC 4.40 LP2N 110.0 mm 8003891001 RS SD50B UNC 4.40 LP2N 154.0 mm 8005171001 RSSD S/ SUB-D Tag carrier Connection data PCB terminal LP3R ess side 7.0 mm ing length D-SUB acc. IEC 807-2 side Rated data 1:1 ersion PCB/plug connector 0.6 kV oltage (~eff) -40 °C…+70 °C ure 0 °C…+55 °C ature (operational) TS 32, TS 35 Insulation coordination (EN 50178) III e category 2 llution severity Approvals EN 50178 2.5 / 0.5 / 4 87.0 x — x 80.0 Type Width Order No. RS SD9S LP3R 40.0 mm 8019930000 RS SD15S LP3R 45.0 mm 8019940000 RS SD25S LP3R 60.0 mm 8019950000 RS SD37S LP3R 80.0 mm 8019960000 RS SD50S LP3R 100.0 mm 8019970000 RS SD9B LP3R 40.0 mm 8019880000 RS SD15B LP3R 45.0 mm 8019890000 RS SD25B LP3R 60.0 mm 8019900000 RS SD37B LP3R 80.0 mm 8019910000 RS SD50B LP3R 100.0 mm 8019920000
A.13 A Interface Units Supply voltage distributor modules Distibution module for 2 supply connections to 8 or 16 potential distribution terminals 45 mm wide Potential distributor designed as two level con- nection element Total current max. 10 A For mounting on rail TS35 x 7.5 and TS35 x 15 Technical data Connection data Connection on process side Stripping length Conversion PCB/plug connector utor +/- / 2-pole feed Rated data Rated voltage Total current feed, max. Electrical distribution, plus/minus Storage temperature Ambient temperature (operational) Housing/Terminal rail Insulation coordination (EN 50178) Surge category/Pollution severity Dimensions Clamping range (rating- / min. / max.) mm Length x width x height mm Note Ordering data Note Supply Voltage Distributor Modules RS VERT 8 LPK2 22.6 51.5 Connection data PCB terminal LPK 2/ Screw connection 7.0 mm ing length 8-way supply voltage distributor +/- / 2-pole feed Rated data
24 V AC/DC ge
10 A l current feed, max. +/- potential tribution, plus/minus -40 °C…+60 °C ure 0 °C…+55 °C ature (operational) RS 45 section /TS 35 l Insulation coordination (EN 50178) III /2 category/Pollution severity 1.5 / 0.5 / 2.5 45 x 51.5 x 64 Type Qty. Order No. RS VERT8 LPK2 1 8252010000 RS VERT 16 LPK2 92.5 22.6 Connection data PCB terminal LPK 2 / Screw connection 7.0 mm ing length 16-way supply voltage distributor +/- / 2-pole feed Rated data 10 A l current feed, max. +/- potential tribution, plus/minus -40 °C…+60 °C ure 0 °C…+55 °C ature (operational) RS 45 section /TS 35 l Insulation coordination (EN 50178) III /2 category/Pollution severity 1.5 / 0.5 / 2.5 45 x 92.5 x 64 Type Qty. Order No. RS VERT16 LPK2 1 8234620000
A.14 A Interface Units Supply voltage distributor modules Distibution module for 2 supply connections to 72 potential distribution terminals Potential distributor designed as three level con- nection element Total current max. 20 A For mounting on rail TS 32/35 Technical data Connection data Connection on process side Stripping length Conversion PCB/plug connector utor +/- / 2-pole feed Rated data Rated voltage Total current feed, max. Electrical distribution, plus/minus Storage temperature Ambient temperature (operational) Housing/Terminal rail, TS 35 Insulation coordination (EN 50178) Surge category/Pollution severity Dimensions Clamping range (rating- / min. / max.) mm Length x width x height mm Note Ordering data Note Supply Voltage Distributor Modules RS VERT 144 LPK3 104 160 + + + + + + + + + + + + + + + + + + + + + + + + + + ++ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Connection data PCB terminal LPK 3 / Screw connection 7.0 mm ing length 72-way supply voltage distributor +/- / 2-pole feed Rated data
250 V AC/DC e
20 A l current feed, max. +/- potential tribution, plus/minus -40 °C…+60 °C ure 0 °C…+55 °C ature (operational) RS 100 section /TS 32, TS 35 Insulation coordination (EN 50178) III /2 category/Pollution severity 1.5 / 0.5 / 2.5 104 x 160 x 87 Type Qty. Order No. RS LPK3/144 VERT 1 8199510000
A.15 A Interface Units Interface units with RJ45 plug connectors Direct coupling of PC and modem in control cabinet Connection of typical office equipment Data rate Cat5 100 Mbit Available as RJ 45/screw connection conversion or as RJ 45 coupling For mounting on rail TS 32/35 Technical data Connection data Connection on process side g-in connector Connection on control side g-in connector Design emale connector Conversion PCB/plug connector Rated data Rated current per connection Number of signals Contact material 6µ AU Storage temperature Ambient temperature (operational) Housing ection T erminal rail Insulation coordination (EN 50178) Surge category/Pollution severity Dimensions Clamping range (rating- / min. / max.) mm Length x width x height mm Note Ordering data Note Interface Units with RJ45 Plug Connectors RS RJ45 LM2N 3.5 RJ45 socket Strain relief Connected to RJ45 socket / shield
1 X1a
2 X1b
1 X2a
2 X2b
1 X3a
2 X3b
1 X4a
2 X4b
1 X5a
2 X5b
1 X6a
2 X6b
3 X6c
4 X6d
5 X6e
6 X6f
7 X6g
8 X6hConnection data
screw connection/ RJ45 plug-in connector screw connection/ RJ45 plug-in connector RJ45 female connector 1:1 ersion PCB/plug connector Rated data phosphor- bronze 6µ AU -40 °C…+70 °C ure 0 °C…+55 °C ature (operational) RS 70 section TS 32, TS 35 Insulation coordination (EN 50178) II /2 category/Pollution severity 1.5 / 0.5 / 1.5 70 x 30 x 48 Connect shielding of data line to protective ground at one end Type Qty. Order No. RS RJ45 10 8611320000 RJ 4A 912171 RJ 6A 911915 RJ 8A 911916 RS RJ45 2WAY X1.1 X1.2 X1.3 X1.4 X1.5 X1.6 X1.7 X1.8 X2.1 X2.2 X2.3 X2.4 X2.5 X2.6 X2.7 X2.8 X3.1 X3.2 X3.3 X3.4 X3.5 X3.6 X3.7 X3.8 X4.1 X4.2 X4.3 X4.4 X4.5 X4.6 X4.7 X4.8 Connection data 2 x RJ45 connector J45 plug-in connector 2 x RJ45 connector J45 plug-in connector RJ45 female connector 1:1, RJ45 coupling connector Rated data phosphor- bronze 6µ AU -40 °C…+70 °C ure 0 °C…+55 °C ature (operational) RS 70 section TS 32, TS 35 Insulation coordination (EN 50178) II /2 category/Pollution severity 70 x 38 x 48 Connect shielding of data line to protective ground at one end Type Qty. Order No. RS RJ45 2WAY 1 8555440000
A.16 A Interface Units = Terminal “A” for ELCO connector and field wiring terminal block. Female Left (Socket) Female Right (Socket) Male Left (Plug) Male Right (Plug) ELCO Interface Unit 70 mm A
38 ELCO
A Cable interface units designed according to UL 508A recognition Connection data - Process side - Type - Control side - Type Rated data Rated voltage Rated current per contact Operating temperature Storage temperature Terminal wire size Insulation stripping length mm (in.) Dimensions Overall width mm (in.) dimensions (mm/in.) Cable Connector Connector Poles Orientation* Retainer Dim. A 38 Left Center Screw 119.63 (4.71) 38 Right Center Screw 119.63 (4.71) 56 Left Center Screw 174.75 (6.88) 56 Right Center Screw 174.75 (6.88) Mounting rail End bracket for TS 32 for TS 35 ELCO Male† connector Standard ELCO Female† connector Standard Screw connection LP2N terminal Plug connection ELCO 125 V 3.5 A -25°C…+50°C -40°C…+70°C AWG 26…12 7 (.28) See table, dim. A Type Order No. Male RS-ELCO 38 M/L 912126 RS-ELCO 38 M/R 912127 RS-ELCO 56 M/L 912131 RS-ELCO 56 M/R 912132 Type Order No. TS 32 0122800000 TS 35 x 7.5 0383400000 TS 35 x 15 0498000000 EWK 2 0199360000 EW 35 0383560000 Screw connection LP2N terminal Plug connection ELCO 125 V 3.5 A -25°C…+50°C -40°C…+70°C AWG 26…12 7 (.28) See table, dim. A Type Order No. Female RS-ELCO 38 F/L 912128 RS-ELCO 38 F/R 912129 RS-ELCO 56 F/L 912133 RS-ELCO 56 F/R 912134 Type Order No. TS 32 0122800000 TS 35 x 7.5 0383400000 TS 35 x 15 0498000000 EWK 2 0199360000 EW 35 0383560000 Technical data Ordering data Accessories *The purpose for the different designations, “left” and “right” are relative to the direction the interconnecting cable is plugged into the interface module. ELCO connector cables generally use #14 AWG wire which does not bend easily. The angled connector reduces the side load torque on the cable connector and printed circuit board by guiding the ca- ble on an angle to the wire duct. †Designates plug (S – male) or socket (B – female) connector on the interface module. Note :
A.17 A Interface Units Multi-pole cable connector for SCSII applications Connection data - Process side - Type - Control side - Type Rated data Rated voltage Rated current per contact Operating temperature Storage temperature Terminal wire size Insulation stripping length mm (in.) Dimensions Overall width mm (in.) dimensions (mm/in.) Poles Connector Retainer Dim. A 50 Bale Latch 149.35 (5.88) Mounting rail End bracket for TS 32 for TS 35 T-CON Female connector with accessory holes Screw connection LP2N terminal Plug connection T-Con 60 V 100 mA -25°C…+50°C -40°C…+70°C AWG 26…12 7 (.28) See table, Dim. A Type Order No. RS-TCON 50 AF 912201 Type Order No. TS 32 0122800000 TS 35 x 7.5 0383400000 TS 35 x 15 0498000000 EWK 2 0199360000 EW 35 0383560000 Technical data Ordering data Accessories Note : T-CON Interface Unit