9012-05-11 COTO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
28 COTO TECHNOLOGY (USA) Tel: (401) 943-2686 / Fax (401) 942-0920 /c54 (Europe) T el: +31-45-5439343 / Fax +31-45-5427216 Miniature Molded SIP Reed Relays The 9012 package dimensions are 47% smaller than standard 9000 SIPs, yet the relay retains the 10W switch ratings of its larger counterparts. The 9011 package dimensions are 65% smaller than the standard 9000 SIPs and incorporates Coto’s 7mm switch rated at 3W . The 9117 goes one step further, reducing package size by 65% from standard 9000 SIPs. This is the smallest SIP footprint with a 3W rating. These minia- ture SIP relays are ideal for use in ATE applications and other high reliability test, measurement and telecommunications applications where high board density and long life are key requirements. Series Features /whwydiamond 9012 is a 10W SIP relay (.400” x .150” x .400”) /whwydiamond 9011 is a 3W SIP relay (.400” x .150” x .265”) /whwydiamond 9117 is the smallest 3W SIP relay (.270” x .150” x .385”) /whwydiamond Magnetic shielding reduces interaction /whwydiamond Optional coil suppression diode protects coil drive circuits /whwydiamond UL File # E67117 (9117 UL Pending) /whwydiamond High insulation resistance 10 12 Ω minimum. /whwydiamond High speed switching /whwydiamond Molded thermoset body on integral lead frame design /whwydiamond High reliability, hermetically sealed contacts for long life 9011, 9012 & 9117 Miniature SIP Relays Model 9011 Model 9012Dimensions in Inches (Millimeters) Model 9117 30 o
29For Most Recent Data, Consult the Coto T echnology Website: www.cotorelay.com /c54 E-mail: sales@cotorelay.com Notes: 1Consult factory for life expectancy at other switching loads. Resistance >0.5Ω defines end of life or failure to open. 2Optional diode is connected to pin #2 (+) and pin #3(-) for 9011 & 9012; pin #1(+) and pin #2(-) for 9117. Correct coil polarity must be observed. 3Consists of 20V Zener-diode and 1N1002 diode in series, connected in parallel with coil. 49011 & 9117 external mag shield. 9012 internal mag shield. 9011, 9012 & 9117 Miniature SIP Relays Environmental Ratings: Storage T emp: -35°C to +100°C; Operating T emp: -20°C to +85°C Solder T emp: 270°C max; 10 sec. max The operate and release voltage and the coil resistance are specified at 25°C. These values vary by approximately 0.4%/ °C as the ambient temperature varies. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s T op View: Grid = .1"x.1" (2.54mm x 2.54mm)