9115 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • 30VDC, 15 to 30 Amps
  • Sealed assemblies, available in manual and automatic reset options
  • Ignition protected SAE J1171 & CCC certified
  • 9115-5 meets CID A-A-55571/01 specifications
  • 9115-6 meets CID A-A-55571/02 specifications
  • UL Recognized E36869 Calibration : 200% rated current, 77°F (25°C) 8 to 50 seconds Ultimate Trip At 77°F (25°C) Must hold 100%, Must trip 138% Endurance Per SAE J553: Automatic: 2,000 cycles @ 200% rated current Manual: 500 cycles @ 200% rated current Interrupt Current Capacity Per SAE J553, 600A Vibration 10G MIL-STD-202 Method 204, Condition A Mechanical Shock 100G MIL-STD-202 Method 213, Condition C Dielectric Strength MIL-STD-202 Method 301, 1500VAC min Insulation Resistance MIL-STD-202 Method 302, Condition B,

100 MΩ min

Weight 9115-5 : 65 grams max 9115-6 : 76 grams max

www.sensata.comCopyright © 2019 Sensata Technologies, Inc. TRIP CURVE DIMENSIONS All dimensions are in inches [mm] Approximate Time, Current Characteristics At 77°F (25°C) 1000 500 100 .101 10 Trip Time in Seconds Current in % Rated Load 1001 0001 0,000 Notes: 1. Shell female MS33800 mates with MS27143 or MS27144. DOES NOT INCLUDE SEALING GASKET 2X #8-32 MOUNTING NUTS 1.187 1.574 ± .032 .485 [12.32] .625 2X R ± .008 SHELL, FEMAL E MS338002X(. 700 [17.78]) .960 [24.4] .470 [11.94])2X ( 1.875 [47.63] MAX. .174 ± .0022X [4.42 ± .051] MTG. HOLE 9115-5 DOES NOT INCLUDE SEALING GASKET 2X #8-32 MOUNTING NUTS 1.187 1.574 ± .032 .485 [12.32] .625 2X R ± .008 SHELL, FEMALE MS33800 .562 [14.27] MIN . PANE L HOLE 2X( .440 [ 11.18] .700 [17.78]) .960 [24.4] .470 [11.94])2X ( .500 [12.7] 1.875 [47.63] MAX. 9115-6

Rev:05/07/19 www.sensata.com CONTACT USCopyright © 2019 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Americas +1 508 236 2551 electrical-protection-sales@ sensata.com Europe, Middle East & Africa +3 174 357 8156 info-sse@list.sensata.com Asia Pacific EP_Asia_Public@list.sensata. com China: +86 (21)2306 1651 India/ Middle East: +91 (40)4033 9611 Japan: +81 (45)277 7104 Korea: +82 (53) 644 9685 ORDERING OPTIONS Example : 9115-5-20 Amp Rating Configuration 9115-5: Auto, sealed 9115-6: Manual, sealed 9115-5 20