9088-200 3M | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
March, 2016 3M™ Double Coated Acrylic Tape 9088-200 Product Description 3M™ Double Coated Tapes with 3M™ Modied Acrylic Adhesive 375 provides an excellent balance of adhesive peel and shear performance. The adhesive system used on this product provides good adhesion to both high and low surface energy substrates. The initial tack provided ensures that a bond of good integrity is achieved soon after application.
3M™ Double Coated Acrylic Tape 9088-200 Technical Information Note The following technical information and data should be considered representative or typical only and should not be used for specication purposes. Typical Physical Properties Property Values Attribute Modier Notes Total Tape Thickness without liner 0.2 mm 7.9 mil Carrier Thickness 0.012 mm 0.5 mil Adhesive Type Acrylic Faceside Faceside adhesive is on the interior of the roll, exposed when unwound and liner removed. Adhesive Type Acrylic Backside Backside adhesive is on the exterior of the roll, exposed when liner is removed. Adhesive Carrier PET (Polyester) Liner 58# Glassine Liner Thickness 0.08 mm 3.2 mil Adhesive Thickness Attribute Modier Notes 0.094 mm Backside The caliper listed is based on a calculation from manufacturing controlled adhesive coat weight. While past data pages have listed nominal thicknesses of 1 and 2 mils, the coat weight (and theoretical caliper) has not changed. 3.7 mil Backside Backside adhesive is on the exterior of the roll, exposed when liner is removed. 0.094 mm 3.7 mil Faceside Faceside adhesive is on the interior of the roll, exposed when unwound and liner removed. Property: Adhesive Thickness Typical Performance Characteristics Table continued on next page 90° Peel Adhesion Substrate
17.4 N/cm 159 oz/in Stainless Steel
14.8 N/cm 135 oz/in ABS
16.7 N/cm 153 oz/in Glass
18.2 N/cm 166 oz/in Polycarbonate (PC)
3M™ Double Coated Acrylic Tape 9088-200 Typical Performance Characteristics (continued) 90° Peel Adhesion Substrate
6 N/cm 55 oz/in High Density Polyethylene (HDPE)
Property: 90° Peel AdhesionMethod: ASTM D3330Dwell/Cure Time: 72Dwell Time Units: hrTemp C: 22CTemp F: 72FEnvironmental Condition: 52%RHBacking: 2 mil Aluminum Foilnotes: 12 in/min (300 mm/min) Property Values Test Condition Notes Static Shear 10000 min 1000 g load @ Room Temperature 1in x 1in size; test terminated after 10,000 minutes Static Shear 10000 min 500 g load @ 70°C (158°F) 1in x 1in size; test terminated after 10,000 minutes Available Sizes Master Width 1220 mm 55 yd 50 m 48 in Property: Master Widthnotes: More sizes may be available. Please call 800-223-7427 or talk to your local 3M representative for more information. Environmental Resistance UV Resistance – When properly applied, nameplates and decorative trim parts are not adversely aected by outdoor exposure. Bond Build-up: The bond strength of 3M™ Adhesive 375 increases as a function of time and temperature. Temperature/Heat Resistance: Adhesive 375 is usable for short periods (minutes, hours) at temperatures up to 300°F (150°C) and for intermittent longer periods (days, weeks) up to 195°F (90°C). Lower Temperature Service Limit: -10°F (-23°C). Handling/Application Information Application Ideas
- Point of Purchase Displays • Indoor/Outdoor Signage • Paper Bonding and Packaging • Splicing • Mounting of Plastic Parts • Mounting of Furniture and Decorative Trims Storage and Shelf Life It is suggested that products are stored at room temperature conditions of 70°F (21°C) and 50% relative humidity. If stored properly, product retains its performance and properties for 24 months from date of manufacture. Trademarks 3M is a trademark of 3M Company.
3M™ Double Coated Acrylic Tape 9088-200 References Property Values 3m.com Product Page https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-High-Performance-Double-Coated-Tape-9088-200?N=5002385+3292678975&rt=rud Safety Data Sheet (SDS) https://www.3m.com/3M/en_US/company-us/SDS-search/results/?gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=9088-200 9086 9087 9088 to 200 9088F200 Adhesive Thickness (mm) Attribute Modier: Faceside 0.094 0.094 Adhesive Thickness (mm) Attribute Modier: Backside 0.094 0.094 Adhesive Type Attribute Modier: Faceside Acrylic Acrylic Adhesive Type Attribute Modier: Backside Acrylic Acrylic Total Tape Thickness without liner (mm) 0.019 0.26 0.2 0.2 Carrier Thickness (mm) 0.038 0.012 0.012 Adhesive Carrier Tissue PVC PET (Polyester) PET (Polyester) Liner Paper (Glassine) Paper (Glassine) 58# Glassine Polypropylene Film Liner Thickness (mm) 0.07 0.07 0.08 0.08 This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards. [Image 4] [Image 5]
3M™ Double Coated Acrylic Tape 9088-200 Recognition/Certication Information 3M United States 3M Center St. Paul, MN 55144-1000 800-362-3550 www.3M.com Please recycle. © 3M 2021. All Rights Reserved. The brands listed above are trademarks of 3M Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sucient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Warranty, Limited Remedy, and Disclaimer: Unless a dierent warranty is specically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specication at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost prots or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.