444 3M | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Double Coated Tapes with Adhesive 300 444 • 444PC • 9009 • 9019 • 9019HL • 9039 Product Data Sheet Product Description April, 2006 3M™ Double Coated Tapes with 3M™ Adhesive 300 feature a thin polyester film for dimensional stability and improved handling with ease of die cutting and laminating. The high tack adhesive provides relatively high initial adhesion and good shear holding power to a variety of surfaces. The carrier also provides easier handling during slitting and die cutting. Construction Faceside Adhesive Carrier Backside Adhesive Liner Total Tape Product Type/ Type/ Type/ Color, Type, Liner Thickness Number Thickness Thickness Thickness Print Caliper (w/o liner) 3M™ Double 300/ Clear PET 3 300/ White, 55#, 0.003" 0.0039" 444 3M™ Double 300/ Clear PET 3 300/ No print Tan, 58#, 0.004" 0.0039" 444PC 3M™ Double 300/ Clear PET 3 300/ No print White, 55#, 0.003" 0.0021" 9009 3M™ Double 300/ Clear PET 300/ No print White, 55#, 0.003" 0.0011" 9019 3M™ Double (0.0084mm) (0.013mm) (0.0084mm) No print 300/ Clear PET 3 300/ Tan, 86#, 0.0065" 0.0011" 9019HL 3M™ Double (0.0084mm) (0.013mm) (0.0084mm) Printed 300/ PET 3 300/ Clear, 55#, 3.0 mils 0.0035" 9039 (0.038mm) (0.013mm) (0.038mm) No print Note 1: Faceside adhesive is on the interior of the roll, exposed when unwound. Note 2: Backside adhesive is on the exterior of the roll, exposed when liner is removed. Note 3: PET (Polyester). The caliper listed is based on a calculation from manufacturing controlled adhesive coat weights using a density of 1.012 g/cc.
Double Coated Tapes with Adhesive 300 444 • 444PC • 9009 • 9019 • 9019HL • 9039 Typical Physical Properties and Performance Characteristics Product Number Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 3M™ Double Coated 3M™ Double Coated 3M™ Double Coat ed 3M™ Double Coated Adhesion to stainless steel ASTM D3330 - 90 degree - 15 minute RT - 72 hour RT - 72 hour 158° F (70° C) ASTM D3330 - 180 degree, 2 mil al foil - 72 hour RT 3) Adhesion to other surfaces* ASTM D3330 - 90 degree, 2 mil al foil, 72 hour RT ABS Polycarbonate Polyester Polypropylene Shear Strength - ASTM D3654 modified - (.5 inch 2 sample size) 1000 grams at 72° F (22° C) 500 grams at 158° F (70° C) Relative Solvent Resistance UV Resistance Relative High Temperature Operating Ranges: Long Term (days, weeks) Short Term (minutes, hours) Available Sizes Tapes 444, 444PC Oz/in (N/100mm) 32 (35) 61 (66) 86 (94) 115 (125) 55 (60) 64 (70) 61 (66) 43 (47) 813 minutes 3 minutes Medium-Low Medium 180° F (82° C) 250° F (121° C) Tape 9009 Oz/in (N/100mm) 54 (59) 61 (66) 76 (83) 82 (89) 59 (64) 61 (66) 1593 minutes 7 minutes Medium-Low Medium 180° F (82° C) 250° F (121° C) Tapes 9019, 9019HL Oz/in (N/100mm) 22 (24) 27 (29) 36 (39) 33 (36) 24 (26) 26 (28) 885 minutes 3 minutes Medium-Low Medium 180° F (82° C) 250° F (121° C) Tape 9039 Oz/in (N/100mm) 67 (73) 82 (90) 98 (107) 129 (141) 73 (80) 80 (88) 77 (84) 924 minutes 4 minutes Medium-Low Medium 180° F (82° C) 250° F (121° C) Product Number 3M double coated 3M double coated 3M double coated 3M double coated Available Lengths (Subject to Minimum order requirements) Standard Maximum Length 1/4" to 1/2" 1/2" to 48" Available Widths Minimum Maximum tapes 444, 444PC 36 yd (33 m) 180 yd (165 m) 360 yd (329 m) 1/4" (6.35 mm) 48" (1219 mm) tape 9009 36 yd (33 m) 180 yd (165 m) 360 yd (329 m) 1/4" (6.35 mm) 54" (1372 mm) tapes 9019, 9019HL 36 yd (33 m) 180 yd (165 m) 360 yd (329 m) 1/4" (6.35 mm) 54" (1372 mm) tape 9039 36 yd (33 m) 180 yd (165 m) 360 yd (329 m) 1/4" (6.35 mm) 54" (1372 mm) Normal Slitting Tolerance ± 1/32" (0.8 mm) ± 1/32" (0.8 mm) ± 1/32" (0.8 mm) ± 1/32" (0.8 mm) Core Size 3.0" (76.2 mm) - 2 -
Double Coated Tapes with Adhesive 300 444 • 444PC • 9009 • 9019 • 9019HL • 9039
Features
- 3M™ Double Coated Tape 444PC is provided on a polycoated kraft liner that provides moisture stability for large part converting.
- 3M™ Adhesive 300 is a medium-firm acrylic adhesive system featuring both high initial adhesion and good high temperature holding power. Application Techniques Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improves bond strength. To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane. * Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. *Note: Carefully read and follow the manufacturer’s precautions and directions for use when working with solvents. Application Ideas Liner Configure Guide
- Medical/non-medical diagnostic test strips
- Plastic film lamination/bonding
- Splicing
- Foam lamination
- Cell phone lens attachment
- Gasket attachment in hand held devices and laptops General purpose steel rule die cutting 58# PCK (Polycoated Kraft) Steel rule cutting many nameplates on common sheet 86# PCK Kiss cutting, steel rule Rotary die-cutting Selective die-cutting (cut adhesive before laminate) Thermoforming Part inspection Embosssed metal parts Metal parts (punch press) 86# PCK Densified Kraft, PET Double-linered HDPE (High density Polyethylene) HDPE, PET White PP (polypropylene) , HDPE PET Application Equipment To apply adhesives in a wide web format, lamination equipment is required to ensure acceptable quality. To learn more about working with pressure-sensitive adhesives please refer to technical bulletin, Lamination Techniques for Converters of Laminating Adhesives (70-0704-1430-8). For additional dispenser information, contact your local 3M sales representative, or the toll free 3M sales assistance number at 1-800-362-3550. - 3 -
Double Coated Tapes with Adhesive 300 444 • 444PC • 9009 • 9019 • 9019HL • 9039 Storage Shelf Life Product Use Warranty and Limited Remedy Limitation of Liability 3M is a trademark of the 3M Company. 3M is a trademark of the 3M Company. Store in original carton at 70°F (21°C) and 50% relative humidity. If stored under proper conditions, product retains its performance and properties for two years from date of manufacture. All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application. Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature, package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY AR ISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the product or refund the purchase price. Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. ISO 9001: 2000 This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2000 standards. 3M Svenska AB Industri Bollstanäsvägen 3 191 89 Sollentuna Tel: 08-92 22 50 Fax: 08-92 22 88 E-post: kundservice@mmm.com www.3M.se/tejp