9000 CK-COMPONENTS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

F–48 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle

9000 Series

  • Power ratings up to 10 AMPS
  • Double pole models
  • Locking lever options available
  • Wide variety of actuator styles
  • RoHS compliant and compatible Typical Applications
  • Shut-off switch
  • Small equipment Specifications CONTACT RATING: 9201 Model: 6 AMPS @ 120 V AC or 28 V DC; 3 AMPS @ 250 V AC. 9221 Model: 10 AMPS @ 125 V AC or 28 V DC; 5 AMPS @ 250 V AC. ELECTRICAL LIFE: 25,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 2,500 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). NOTE: Any models supplied with Q contact material ar e RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center . Materials CASE: Diallyl phthalate (DAP) (UL 94V-0). ACTUATOR: Brass, chrome plated. BUSHING: Brass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, matte-tin plated. END CONTACTS: 9201 Model: Coin silver, silver plated. 9221 Model: Silver cadmium oxide. CENTER CONTACTS: Copper alloy, silver plated ALL TERMINALS: 9201 Model: Copper alloy, silver plated. 9221 Model: Copper alloy, matte-tin plated. TERMINAL SEAL: Epoxy. HARDWARE: Nut & Locking ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F-49 thru F-53. For additional options not shown in catalog, consult Customer Service Center. Switch Function

9201 DPDT, On-On, 6 Amps

9221 DPDT, On-On, 10 Amps

S Antirotation, .410" high K Locking lever, .650" high K1 Locking lever, .680" high L43 Lever handle with cap P3 Flatted, anti-rotation, .450" high T .687" high, 15/32 bushing T1 .460" high, 15/32 bushing Terminations Z Solder lug Z4 Quick connect (9221 only) AV2 Vert. right angle, PC thru-hole (9201 only) C PC Thru-hole Bushing H3 .296" high, keyway CW Splashproof H .296" high, flat Contact Material Q Silver Seal E Epoxy D No epoxy Actuator Color/Finish NONE Bright chrome

2 Black

2 Black anodized aluminum

F–49 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle 15/32-32 UNS-2A15/32-32 UNS-2A 1/4 40 UNS-2A DPDT 2-1,5-42-3,5-6 ON ON ON ON

6 AMPS

10 AMPS

POS. 1 POS. 2 SWITCH FUNCTION POS. 1 POS. 2 RATING*MODEL NO. NO. POLES Terminal Nos. Molded On Side Of Case DPDT Part number shown: 9201SH3ZQE * See CONTACT MATERIAL, page F-52, for complete ratings. All 9000 Series models meet international dimensional and electrical requirements. 9221 model must be ordered with Z4 terminations and D seal option. ACTUATOR FINISH ACTUATOR S ANTIROTATION, .410" HIGH P3 FLATTED, ANTIROTATION, .450" HIGH T .687" HIGH, 15/32 BUSHING T1 .460" HIGH, 15/32 BUSHING Dress nut part number: 709901201 supplied standard with P3 actuator. NOTE: Black hardware is supplied when either black actuators or bushings are specified. All hardware is available separately, see Section N. Antirotation is standard on all actuators, provides ‘anti-push-in’ feature on actuator. NONE NATURAL ALUMINUM—With Nickel Plated Bushing NOTE: Bushing option code not required for T & T1 actuators unless CW splashproof bushing ordered. Black hardware is supplied when either black actuators or bushings are specified. All hardware is available separately, see Section N. Antirotation is standard on all actuators except T & T1, pr ovides ‘anti-push-in’ feature on actuator. NONE BRIGHT CHROME—With Nickel Plated Bushing

F–50 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle 1/4-40 UNS-2A1/4-40 UNS-2A Locking Positions

2 Position Lock

1/4-40 UNS-2A 1/4-40 UNS-2A K LOCKING LEVER, .650" HIGH, THREADED H3 .296" HIGH, THREADED, KEYWAY H .296" HIGH, THREADED, FLAT CW SPLASHPROOF , 15/32 BUSHING L40 LEVER HANDLE WITHOUT CAP L43 PLASTIC LEVER HANDLE WITH ANTIROTATION AND CAP , P/N 4812 K1 LOCKING LEVER, .680" HIGH, THREADED NOTE: To prevent accidental actuation, toggles must be lifted before being actuated. When released, toggles again lock in place. Bushing option code not required. Overtightening mounting nut may cause actuator to bind. NOTE: Lever handle actuator L43 supplied, but not installed. For interchangeability, order L40 actuator option and order lever handles separately, see page F-53. Antirotation is standard on all actuators, provides ‘anti-push-in’ feature. Internal actuator seal standard. External bushing seal available separately from APM Hexseal, part # MFS-60064. NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings. Black hardware is supplied when either black bushings or actuators ar e specified. Optional mounting nut and locking ring styles and finishes available, see Section N. Will withstand 12 in./lbs. of torque with no distortion. For T & T1 actuators only. Finish: Matte Other colors available, consult Customer Service Center. No color choice required. NONE No Actuator Color (L40 option) ACTUATOR CAP COLOR OPTION CODE NONE NICKEL NONE NATURAL ALUMINUM–With Nickle Plated Bushing

F–51 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle 1/4-40 UNS-2A 15/32-32 UNS-2A PC MOUNTING BUSHING FINISH BUSHING Z SOLDER LUG Z4 .187" QUICK CONNECT C PC THRU-HOLE

9201 Only

9221 Only

NOTE: Only termination available with 9221 model. Must be ordered with D seal option. Mates with standard .187 Nema female connector. Actuator Shown in Pos. 3 SECTION A-A PC MOUNTING AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE 9201SH3AV2QE Vertical Actuation DPDT NOTE: Terminal bend radii and lead-in manufacturing option. Terminal spacing greater than 3mm at all points. Terminal Nos. For Reference Only

F–52 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com FToggle .383 (9,73) .312 (7,92) .843 (21,41) Cap Compatible with S actuator PART NO.

896801000 WHITE

896802000 BLACK

896803000 RED

Material: Polyethylene Finish: Matte Cap Compatible with S actuator PART NO.

706201000 WHITE

706202000 BLACK

706203000 RED

Material: Vinyl Finish: Matte L43 Actuator PART NO.

481202000 BLACK

481203000 RED

Material: Nylon Finish: Matte NOTE: Additional nuts, locking rings and lockwashers available separately, see Section N. Other colors available, consult Customer Service Center. Not available with 9221 model or Z4 terminations. Must be ordered with 9221 model and Z4 termination. 6 AMPS @120 V AC OR 28 V DC; 3 AMPS @ 250 V AC. 10 AMPS @125 V AC OR 28 V DC; 5 AMPS @ 250 V AC. POWER SILVER OR TIN 2,5 TIN 5 SILVER 1,2 SILVER CADMIUM OXIDE 3,4,6 9201 9221 Q RATINGSTERMINAL PLATINGCONTACT MATERIALMODELOPTION CODE 1 END CONTACTS: Coin silver, silver plated. 2 CENTER CONTACTS & ALL TERMINALS: Copper alloy, silver plated. 3 END CONTACTS: Silver cadmium oxide. 4 CENTER CONTACTS: Copper alloy, silver plated. 5 Z4 TERMINALS ONLY: Copper alloy, matte-tin plated. 6 Cadmium in electrical switch contacts is exempt fr om RoHS. NOTE: Any models supplied with Q contact material are RoHS compliant. All 9000 Series models meet international dimensional and electrical requirements. 9221 model must be ordered with Z4 terminations and D seal option. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. E EPOXY SEAL D NO EPOXY SEAL 15/32-32, NS-2A .464 (11,79) 1/4-40 uns-2A nut .524 (13,3) .65 8 (16 ,7) .331 (8,4) 15/32-32 NS-2A ø .331 (8,4) .94 5 ( 24,0 .65 7 ( 16,7 759D02000 Sealing Boot 703D02000 Sealing Boot 704D02000 Sealing Boot NOTE: For use with S actuator style when combined with H3 and H bushings NOTE: For use with T style actuator NOTE: For use with T style actuator