8M05B

MC78M00 ONSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 16

Technical content

Features

• No External Components Required
• Internal Thermal Overload Protection
• Internal Short Circuit Current Limiting
• Output Transistor Safe−Area Compensation
• MC78M00A High Accuracy (±2%) Available for 5.0 V , 8.0 V , 12 V and 15 V
• Pb−Free Packages are Available*

Figure 1. Representative Schematic Diagram This device contains 28 active transistors. Reference Manual, SOLDERRM/D. dimensions section on page 10−14 of this data sheet.

ORDERING INFORMATION

connected to Pin 2. Pin 1. Input 2. Ground 3. Output Heatsink surface (shown as terminal 4 in case outline drawing) is connected to Pin 2. MC AWLYWWG 78MxxXXT http://onsemi.com 1 2 4 xxxxxG ALYWW xx = Voltage Option XX = Appropriate Suffix Options A = Assembly Location WL = Wafer Lot Y = Year WW = Work Week G = Pb−Free Package See general marking information in the device marking section on page 10 of this data sheet. DEVICE MARKING INFORMATION

MC78M00, MC78M00A Series http://onsemi.com MAXIMUM RATINGS (TA = 25°C, unless otherwise noted) (Note 1) Rating Symbol Value Unit Input Voltage (5.0 V−18 V) VI 35 Vdc (20 V−24V) 40 Power Dissipation (Package Limitation) Plastic Package, T Suffix TA = 25°C PD Internally Limited Thermal Resistance, Junction−to−Air /C0113JA 70 °C/W Thermal Resistance, Junction−to−Case /C0113JC 5.0 °C/W Plastic Package, DT Suffix TA = 25°C PD Internally Limited Thermal Resistance, Junction−to−Air /C0113JA 92 °C/W Thermal Resistance, Junction−to−Case /C0113JC 5.0 °C/W Operating Junction Temperature Range TJ +150 °C Storage Temperature Range Tstg −65 to +150 °C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. This device series contains ESD protection and exceeds the following tests: Human Body Model 2000 V per MIL−STD−883, Method 3015. Machine Model Method 200 V. MC78M05C/AC/B/AB ELECTRICAL CHARACTERISTICS (VI = 10 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 2) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO Vdc MC78M05C 4.8 5.0 5.2 MC78M05AC 4.9 5.0 5.1 Output Voltage Variation VO Vdc (7.0 Vdc ≤ VI ≤ 20 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M05C 4.75 − 5.25 MC78M05AC 4.80 − 5.20 Line Regulation Regline − 3.0 50 mV (TJ = 25°C, 7.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 20 100 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 50 Input Bias Current (TJ = 25°C) IIB − 3.2 6.0 mA Quiescent Current Change /C0068IIB mA (8.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 40 − /C0109V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 8.0 V ≤ VI ≤ 18 V) 62 − − (IO = 300 mA, f = 120 Hz, 8.0 ≤ VI ≤ 18 V, TJ = 25°C) 62 80 − Dropout Voltage VI−VO − 2.0 − Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 50 − mA Average Temperature Coefficient of Output Voltage /C0068VO//C0068T − ±0.2 − mV/°C (IO = 5.0 mA) Peak Output Current IO − 700 − mA (TJ = 25°C) 2. T low =0 °C for MC78MxxAC, C T high = +125°C for MC78MxxAB, AC, B, C = −40 °C for MC78MxxAB, B

MC78M00, MC78M00A Series http://onsemi.com MC78M06C ELECTRICAL CHARACTERISTICS (VI = 11 V, IO = 350 mA, 0°C < TJ < 125°C, PD ≤ 5.0 W, unless otherwise noted) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 5.75 6.0 6.25 Vdc Output Voltage Variation VO 5.7 − 6.3 Vdc (8.0 Vdc ≤ VI ≤ 21 Vdc, 5.0 mA ≤ IO ≤ 350 mA) Line Regulation Regline − 5.0 50 mV (TJ = 25°C, 8.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 20 120 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 60 Input Bias Current (TJ = 25°C) IIB − 3.2 6.0 mA Quiescent Current Change /C0068IIB mA (9.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 45 − /C0109V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 9.0 V ≤ VI ≤ 19 V) 59 − − (IO = 300 mA, f = 120 Hz, 9.0 V ≤ VI ≤ 19 V, TJ = 25°C) 59 80 − Dropout Voltage VI − VO − 2.0 − Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 50 − mA Average Temperature Coefficient of Output Voltage /C0068VO//C0068T − ±0.2 − mV/°C (IO = 5.0 mA) Peak Output Current IO − 700 − mA (TJ = 25°C) MC78M08C/AC/B/AB ELECTRICAL CHARACTERISTICS (VI = 14 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 3) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO Vdc MC78M08C 7.70 8.0 8.30 MC78M08AC 7.84 8.0 8.16 Output Voltage Variation VO Vdc (10.5 Vdc ≤ VI ≤ 23 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M08C 7.6 − 8.4 MC78M08AC 7.7 − 8.3 Line Regulation Regline − 6.0 50 mV (TJ = 25°C, 10.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 25 160 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 80 Input Bias Current (TJ = 25°C) IIB − 3.2 6.0 mA Quiescent Current Change /C0068IIB mA (10.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 52 − /C0109V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 11.5 V ≤VI ≤ 21.5 V) 56 − − (IO = 300 mA, f = 120 Hz, 11.5 V ≤VI ≤ 21.5 V, TJ = 25°C) 56 80 − Dropout Voltage VI−VO − 2.0 − Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 50 − mA Average Temperature Coefficient of Output Voltage /C0068VO//C0068T − ±0.2 − mV/°C (IO = 5.0 mA) Peak Output Current IO − 700 − mA (TJ = 25°C) 3. T low =0 °C for MC78MxxAC, C T high = +125°C for MC78MxxAB, AC, B, C = −40 °C for MC78MxxAB, B

MC78M00, MC78M00A Series http://onsemi.com MC78M09C/B ELECTRICAL CHARACTERISTICS (VI = 15 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 4) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 8.64 9.0 9.45 Vdc Output Voltage Variation VO 8.55 − 9.45 Vdc (11.5 Vdc ≤ VI ≤ 23 Vdc, 5.0 mA ≤ IO ≤ 350 mA) Line Regulation Regline − 6.0 50 mV (TJ = 25°C, 11.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 25 180 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 90 Input Bias Current (TJ = 25°C) IIB − 3.2 6.0 mA Quiescent Current Change /C0068IIB mA (11.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) − − 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 52 − /C0109V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 12.5 V ≤VI ≤ 22.5 V) 56 − − (IO = 300 mA, f = 120 Hz, 12.5 V ≤VI ≤ 22.5 V, TJ = 25°C) 56 80 − Dropout Voltage VI−VO − 2.0 − Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 50 − mA Average Temperature Coefficient of Output Voltage /C0068VO//C0068T − ±0.2 − mV/°C (IO = 5.0 mA) Peak Output Current IO − 700 − mA (TJ = 25°C) MC78M12C/AC/B/AB ELECTRICAL CHARACTERISTICS (VI = 19 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 4) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO Vdc MC78M12C 11.50 12 12.50 MC78M12AC 11.76 12 12.24 Output Voltage Variation VO Vdc (14.5 Vdc ≤ VI ≤ 27 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M12C 11.4 − 12.6 MC78M12AC 11.5 − 12.5 Line Regulation Regline − 8.0 50 mV (TJ = 25°C, 14.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 25 240 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 120 Input Bias Current (TJ = 25°C) IIB − 3.2 6.0 mA Quiescent Current Change /C0068IIB mA (14.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) − − 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 75 − /C0109V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 15 V ≤VI ≤ 25 V) 55 − − (IO = 300 mA, f = 120 Hz, 15 V ≤VI ≤ 25 V, TJ = 25°C) 55 80 − Dropout Voltage VI−VO − 2.0 − Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 50 − mA Average Temperature Coefficient of Output Voltage /C0068VO//C0068T − ±0.3 − mV/°C (IO = 5.0 mA) Peak Output Current IO − 700 − mA (TJ = 25°C) 4. T low =0 °C for MC78MxxAC, C T high = +125°C for MC78MxxAB, AC, B, C = −40 °C for MC78MxxAB, B

MC78M00, MC78M00A Series http://onsemi.com MC78M15C/AC/B/AB ELECTRICAL CHARACTERISTICS (VI = 23 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 5) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO Vdc MC78M15C 14.4 15 15.6 MC78M15AC 14.7 15 15.3 Output Voltage Variation VO Vdc (17.5 Vdc ≤ VI ≤ 30 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M15C 14.25 − 15.75 MC78M15AC 14.40 − 15.60 Input Regulation Regline − 10 50 mV (TJ = 25°C, 17.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 25 300 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 150 Input Bias Current (TJ = 25°C) IIB − 3.2 6.0 mA Quiescent Current Change /C0068IIB mA (17.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) − − 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 90 − /C0109V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 18.5 V ≤ VI ≤ 28.5 V) 54 − − (IO = 300 mA, f = 120 Hz, 18.5 V ≤ VI ≤ 28.5 V, TJ = 25°C) 54 70 − Dropout Voltage VI−VO − 2.0 − Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 50 − mA Average Temperature Coefficient of Output Voltage /C0068VO//C0068T − ±0.3 − mV/°C (IO = 5.0 mA) Peak Output Current IO − 700 − mA (TJ = 25°C) MC78M18C/B ELECTRICAL CHARACTERISTICS (VI = 27 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 5) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 17.3 18 18.7 Vdc Output Voltage Variation VO 17.1 − 18.9 Vdc (21 Vdc ≤ VI ≤ 33 Vdc, 5.0 mA ≤ IO ≤ 350 mA) Line Regulation Regline − 10 50 mV (TJ = 25°C, 21 Vdc ≤ VI ≤ 33 Vdc, IO = 200 mA) Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 30 360 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 180 Input Bias Current (TJ = 25°C) IIB − 3.2 6.5 mA Quiescent Current Change /C0068IIB mA (21 Vdc ≤ VI ≤ 33 Vdc, IO = 200 mA) − − 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 100 − /C0109V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 22 V ≤ VI ≤ 32 V) 53 − − (IO = 300 mA, f = 120 Hz, 22 V ≤ VI ≤ 32 V, TJ = 25°C) 53 70 − Dropout Voltage VI−VO − 2.0 − Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 50 − mA Average Temperature Coefficient of Output Voltage /C0068VO//C0068T − ±0.3 − mV/°C (IO = 5.0 mA) Peak Output Current IO − 700 − mA (TJ = 25°C) 5. T low =0 °C for MC78MxxAC, C T high = +125°C for MC78MxxAB, AC, B, C = −40 °C for MC78MxxAB, B

MC78M00, MC78M00A Series http://onsemi.com MC78M20C/B ELECTRICAL CHARACTERISTICS (VI = 29 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 6) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 19.2 20 20.8 Vdc Output Voltage Variation VO 19 − 21 Vdc (23 Vdc ≤ VI ≤ 35 Vdc, 5.0 mA ≤ IO ≤ 350 mA) Line Regulation Regline − 10 50 mV (TJ = 25°C, 23 Vdc ≤ VI ≤ 35 Vdc, IO = 200 mA) Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 30 400 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 200 Input Bias Current (TJ = 25°C) IIB − 3.2 6.5 mA Quiescent Current Change /C0068IIB mA (23 Vdc ≤ VI ≤ 35 Vdc, IO = 200 mA) − − 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 110 − /C0109V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 24 V ≤ VI ≤ 34 V) 52 − − (IO = 300 mA, f = 120 Hz, 24 V ≤ VI ≤ 34 V, TJ = 25°C) 52 70 − Dropout Voltage VI−VO − 2.0 − Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS − 50 − mA Average Temperature Coefficient of Output Voltage /C0068VO//C0068T − ±0.5 − mV/°C (IO = 5.0 mA) Peak Output Current IO − 700 − mA (TJ = 25°C) MC78M24C/B ELECTRICAL CHARACTERISTICS (VI = 33 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 6) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 23 24 25 Vdc Output Voltage Variation VO 22.8 − 25.2 Vdc (27 Vdc ≤ VI ≤ 38 Vdc, 5.0 mA ≤ IO ≤ 350 mA) Line Regulation Regline − 10 50 mV (TJ = 25°C, 27 Vdc ≤ VI ≤ 38 Vdc, IO = 200 mA) Load Regulation Regload mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) − 30 480 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) − 10 240 Input Bias Current (TJ = 25°C) IIB − 3.2 7.0 mA Quiescent Current Change /C0068IIB mA (27 Vdc ≤ VI ≤ 38 Vdc, IO = 200 mA) − − 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn − 170 − /C0109V Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 28 V ≤ VI ≤ 38 V) 50 − − (IO = 300 mA, f = 120 Hz, 28 V ≤ VI ≤ 38 V, TJ = 25°C) 50 70 − Dropout Voltage VI−VO − 2.0 − Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C) IOS − 50 − mA Average Temperature Coefficient of Output Voltage /C0068VO//C0068T − ±0.5 − mV/°C (IO = 5.0 mA) Peak Output Current IO − 700 − mA (TJ = 25°C) 6. T low =0 °C for MC78MxxAC, C T high = +125°C for MC78MxxAB, AC, B, C = −40 °C for MC78MxxAB, B

MC78M00, MC78M00A Series http://onsemi.com Voltage Temperature Range Package Marking Shipping† MC78M05CDT 5.0 V TJ = 0° to +125°C DPAK−3 78M05

75 Units / RailMC78M05CDTG DPAK−3

(Pb−Free) 78M05 MC78M05CDTRK DPAK−3 78M05

2500 Units / Tape & ReelMC78M05CDTRKG DPAK−3

(Pb−Free) 78M05 MC78M05ACDT DPAK−3 8M05D

75 Units / RailMC78M05ACDTG DPAK−3

(Pb−Free) 8M05D MC78M05ACDTRK DPAK−3 8M05D

2500 Units / Tape & ReelMC78M05ACDTRKG DPAK−3

(Pb−Free) 8M05D MC78M05CT TO−220 78M05CT

50 Units / RailMC78M05CTG TO−220

(Pb−Free) 78M05CT MC78M05ACT TO−220 78M05ACT

50 Units / RailMC78M05ACTG TO−220

(Pb−Free) 78M05ACT MC78M05ABDT TJ = −40° to +125°C DPAK−3 8M05A

75 Units / RailMC78M05ABDTG DPAK−3

(Pb−Free) 8M05A MC78M05ABDTRK DPAK−3 8M05A

2500 Units / Tape & ReelMC78M05ABDTRKG DPAK−3

(Pb−Free) 8M05A MC78M05ABT TO−220 78M05ABT

50 Units / RailMC78M05ABTG TO−220

(Pb−Free) 78M05ABT MC78M05BDT DPAK−3 8M05B

75 Units / RailMC78M05BDTG DPAK−3

(Pb−Free) 8M05B MC78M05BDTRK DPAK−3 8M05B

2500 Units / Tape & ReelMC78M05BDTRKG DPAK−3

(Pb−Free) 8M05B MC78M05BT TO−220 78M05BT

50 Units / RailMC78M05BTG TO−220

(Pb−Free) 78M05BT †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.

MC78M00, MC78M00A Series http://onsemi.com Voltage Temperature Range Package Marking Shipping† MC78M06CDT 6.0 V TJ = 0° to +125°C DPAK−3 78M06

75 Units / RailMC78M06CDTG DPAK−3

(Pb−Free) 78M06 MC78M06CDTRK DPAK−3 78M06

2500 Units / Tape & ReelMC78M06CDTRKG DPAK−3

(Pb−Free) 78M06 MC78M06CT TO−220 78M06CT

50 Units / Rail

MC78M06CTG TO−220 (Pb−Free) 78M06CT MC78M06BT TJ = −40° to +125°C TO−220 78M06BT MC78M06BTG TO−220 (Pb−Free) 78M06BT MC78M08CDT 8.0 V TJ = 0° to +125°C DPAK−3 78M08

75 Units / RailMC78M08CDTG DPAK−3

(Pb−Free) 78M08 MC78M08CDTRK DPAK−3 78M08

2500 Units / Tape & ReelMC78M08CDTRKG DPAK−3

(Pb−Free) 78M08 MC78M08ACDT DPAK−3 8M08D

75 Units / RailMC78M08ACDTG DPAK−3

(Pb−Free) 8M08D MC78M08ACDTRK DPAK−3 8M08D

2500 Units / Tape & ReelMC78M08ACDTRKG DPAK−3

(Pb−Free) 8M08D MC78M08CT TO−220 78M08CT MC78M08CTG TO−220 (Pb−Free) 78M08CT MC78M08ACT TO−220 78M08ACT MC78M08ACTG TO−220 (Pb−Free) 78M08ACT MC78M08ABDT TJ = −40° to +125°C DPAK−3 8M08A

75 Units / Rail

MC78M08ABDTG DPAK−3 8M08A MC78M08ABDTRK DPAK−3 8M08A

2500 Units / Tape & ReelMC78M08ABDTRKG DPAK−3

(Pb−Free) 8M08A MC78M08ABT TO−220 78M08ABT

50 Units / RailMC78M08ABTG TO−220

(Pb−Free) 78M08ABT MC78M08BDT DPAK−3 8M08B

75 Units / RailMC78M08BDTG DPAK−3

(Pb−Free) 8M08B MC78M08BDTRK DPAK−3 8M08B

2500 Units / Tape & ReelMC78M08BDTRKG DPAK−3

(Pb−Free) 8M08B MC78M08BT TO−220 78M08BT

50 Units / RailMC78M08BTG TO−220

(Pb−Free) 78M08BT †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.

MC78M00, MC78M00A Series http://onsemi.com Voltage Temperature Range Package Marking Shipping† MC78M09CDT 9.0 V TJ = 0° to +125°C DPAK−3 78M09 75 Units / Rail MC78M09CDTG DPAK−3 (Pb−Free) 78M09 75 Units / Rail MC78M09CDTRK DPAK−3 78M09 2500 Units / Tape & Reel MC78M09CDTRKG DPAK−3 (Pb−Free) 78M09 2500 Units / Tape & Reel MC78M09CT TO−220 78M09CT 50 Units / Rail MC78M09CTG TO−220 (Pb−Free) 78M09CT 50 Units / Rail MC78M09BDT TJ = −40° to +125°C DPAK−3 8M09B 75 Units / Rail MC78M09BDTG DPAK−3 (Pb−Free) 8M09B 75 Units / Rail MC78M09BDTRK DPAK−3 8M09B 2500 Units / Tape & Reel MC78M09BDTRKG DPAK−3 (Pb−Free) 8M09B 2500 Units / Tape & Reel MC78M12CDT 12 V TJ = 0° to +125°C DPAK−3 78M12

75 Units / RailMC78M12CDTG DPAK−3

(Pb−Free) 78M12 MC78M12CDTRK DPAK−3 78M12

2500 Units / Tape & ReelMC78M12CDTRKG DPAK−3

(Pb−Free) 78M12 MC78M12ACDT DPAK−3 8M12D

75 Units / RailMC78M12ACDTG DPAK−3

(Pb−Free) 8M12D MC78M12ACDTRK DPAK−3 8M12D

2500 Units / Tape & ReelMC78M12ACDTRKG DPAK−3

(Pb−Free) 8M12D MC78M12CT TO−220 78M12CT MC78M12CTG TO−220 78M12CT MC78M12ACT TO−220 78M12ACT MC78M12ACTG TO−220 (Pb−Free) 78M12ACT MC78M12ABDT TJ = −40° to +125°C DPAK−3 8M12A

75 Units / RailMC78M12ABDTG DPAK−3

(Pb−Free) 8M12A MC78M12ABDTRK DPAK−3 8M12A

2500 Units / Tape & ReelMC78M12ABDTRKG DPAK−3

(Pb−Free) 8M12A MC78M12ABT TO−220 78M12ABT

50 Units / RailMC78M12ABTG TO−220

(Pb−Free) 78M12ABT MC78M12BDT DPAK−3 8M12B

75 Units / RailMC78M12BDTG DPAK−3

(Pb−Free) 8M12B MC78M12BDTRK DPAK−3 8M12B

2500 Units / Tape & ReelMC78M12BDTRKG DPAK−3

(Pb−Free) 8M12B MC78M12BT TO−220 78M12BT

50 Units / RailMC78M12BTG TO−220

(Pb−Free) 78M12BT †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.

MC78M00, MC78M00A Series http://onsemi.com Voltage Temperature Range Package Marking Shipping† MC78M15CDT 15 V TJ = 0° to +125°C DPAK−3 78M15

75 Units / RailMC78M15CDTG DPAK−3

(Pb−Free) 78M15 MC78M15CDTRK DPAK−3 78M15

2500 Units / Tape & ReelMC78M15CDTRKG DPAK−3

(Pb−Free) 78M15 MC78M15ACDT DPAK−3 8M15D

75 Units / RailMC78M15ACDTG DPAK−3

(Pb−Free) 8M15D MC78M15ACDTRK DPAK−3 8M15D

2500 Units / Tape & ReelMC78M15ACDTRKG DPAK−3

(Pb−Free) 8M15D MC78M15CT TO−220 78M15CT MC78M15CTG TO−220 (Pb−Free) 78M15CT MC78M15ACT TO−220 78M15ACT MC78M15ACTG TO−220 (Pb−Free) 78M15ACT MC78M15ABDT TJ = −40° to +125°C DPAK−3 8M15A

75 Units / RailMC78M15ABDTG DPAK−3

(Pb−Free) 8M15A MC78M15ABDTRK DPAK−3 8M15A

2500 Units / Tape & ReelMC78M15ABDTRKG DPAK−3

(Pb−Free) 8M15A MC78M15ABT TO−220 78M15ABT

50 Units / RailMC78M15ABTG TO−220

(Pb−Free) 78M15ABT MC78M15BDT DPAK−3 8M15B

75 Units / RailMC78M15BDTG DPAK−3

(Pb−Free) 8M15B MC78M15BDTRK DPAK−3 8M15B

2500 Units / Tape & ReelMC78M15BDTRKG DPAK−3

(Pb−Free) 8M15B MC78M15BT TO−220 78M15BT

50 Units / RailMC78M15BTG TO−220

(Pb−Free) 78M15BT †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.

MC78M00, MC78M00A Series http://onsemi.com Voltage Temperature Range Package Marking Shipping† MC78M18CDT 18 V TJ = 0° to +125°C DPAK−3 78M18

75 Units / RailMC78M18CDTG DPAK−3

(Pb−Free) 78M18 MC78M18CDTRK DPAK−3 78M18

2500 Units / Tape & ReelMC78M18CDTRKG DPAK−3

(Pb−Free) 78M18 MC78M18CT TO−220 78M18CT MC78M18CTG TO−220 (Pb−Free) 78M18CT MC78M18BT TJ = −40° to +125°C TO−220 78M18BT MC78M18BTG TO−220 (Pb−Free) 78M18BT MC78M20CT 20 V TJ = 0° to +125°C TO−220 78M20CT MC78M20CTG TO−220 (Pb−Free) 78M20CT MC78M20BT TJ = −40° to +125°C TO−220 78M20BT MC78M24CT 24 V TJ = 0° to +125°C TO−220 78M24CT MC78M24CTG TO−220 (Pb−Free) 78M24CT MC78M24BT TJ = −40° to +125°C TO−220 78M24BT MC78M24BTG TO−220 (Pb−Free) 78M24BT †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.

MC78M00, MC78M00A Series http://onsemi.com PACKAGE DIMENSIONS DPAK−3 DT SUFFIX CASE 369C−01 ISSUE O D A K B RV S F L G 2 PL M0.13 (0.005) T E C U J H −T− SEATING PLANE Z DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.235 0.245 5.97 6.22 B 0.250 0.265 6.35 6.73 C 0.086 0.094 2.19 2.38 D 0.027 0.035 0.69 0.88 E 0.018 0.023 0.46 0.58 F 0.037 0.045 0.94 1.14 G 0.180 BSC 4.58 BSC H 0.034 0.040 0.87 1.01 J 0.018 0.023 0.46 0.58 K 0.102 0.114 2.60 2.89 L 0.090 BSC 2.29 BSC R 0.180 0.215 4.57 5.45 S 0.025 0.040 0.63 1.01 V 0.035 0.050 0.89 1.27 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 123 5.80 0.228 2.58 0.101 1.6 0.063 6.20 0.244 3.0 0.118 6.172 0.243 /C0466mm inches/C0467SCALE 3:1 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SOLDERING FOOTPRINT*

MC78M00, MC78M00A Series http://onsemi.com PACKAGE DIMENSIONS TO−220 T SUFFIX CASE 221A−09 ISSUE AA NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 D 0.025 0.035 0.64 0.88 F 0.142 0.147 3.61 3.73 G 0.095 0.105 2.42 2.66 H 0.110 0.155 2.80 3.93 J 0.018 0.025 0.46 0.64 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 Q 0.100 0.120 2.54 3.04 R 0.080 0.110 2.04 2.79 S 0.045 0.055 1.15 1.39 T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 B Q H Z L V G N A K F 12 3 D SEATING PLANE−T− C ST U R J ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 MC78M00/D LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative.