8L01-05-001 COTO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
26 COTO TECHNOLOGY (USA) Tel: (401) 943-2686 / Fax (401) 942-0920 /c54 (Europe) T el: +31-45-5439343 / Fax +31-45-5427216 Economy DIP Reed Relays The Coto 8L Spartan Series relays combine Coto quality and economy in the industry standard 14 pin molded DIP package. This series will cross to all competitive DIP packages and is ideal for telecom, security, and other general purpose applications. 8L Series Features /whwydiamond Drop-in low cost replacement for industry standard DIP packages /whwydiamond Contact forms; 1A, 2A, 1B and 1C available /whwydiamond Available coils in 5V , 12V and 24V /whwydiamond Molded thermoset body on integral lead frame design /whwydiamond Hermetically Sealed Contacts /whwydiamond Optional Electrostatic Shield and Coil Suppression Diode /whwydiamond UL File # E67117 8L Series/Spartan DIP Reed Relays Dimensions in Inches (Millimeters) (For Model #’s 8L01, 8L02, 8L21 & 8L41) (For Model # 8L61)
27For Most Recent Data, Consult the Coto T echnology Website: www.cotorelay.com /c54 E-mail: sales@cotorelay.com 8L Series/Spartan DIP Reed Relays Environmental Ratings: Storage T emp: -35°C to +100°C Operating T emp: -20°C to +85°C Solder T emp: 270°C max; 10 sec. max The operate and release voltage and the coil resistance are specified at 25°C. These values vary by approxi- mately 0.4%/°C as the ambient temperature varies. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s Notes: 1 Consult factory for life expectancy at other switching loads.
2 Molded Depression on top of relay refers to pin #1
location. 3 Optional coil suppression diode across pins 2(+) and 6(-). 4 Optional ES Shield is tied to pin 9.
5 Surface mount processing temperature: 260°C max for 1
minute dwell time. T emperature measured on leads where lead exits molded package.
6 Consists of 56V Zener diode and 1N4148 diode in series,
connected in parallel with coil. T op View: Dot stamped on top of relay refers to pin #1 location Grid = .1"x.1" (2.54mm x 2.54mm)