38999_18 SOURIAU | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Souriau has developed a dedicated backshell range for 38999 Series III to accomodate the specifi c physical properties of the ELIO ® optical terminus. A Complete Backshell Range Insuring ELIO® High Performance
38999 Series III
® Fiber Optic Backshell Range 4 types available Adapted to multi-fi ber cable and single fi ber assemblies. High performances Accomodates movement of cable during mating. SOURIAU global offering Accessories and harnessing also available. Easy harnessing Cabling chamber adapted to ELIO® technology. Unmated: Mated: Clamped
38999 Series III | ELIO® Fiber Optic Backshell Range
Description
- The optical contact can have a specific mating sequence: the cable can move back during the mating in some situation. To avoid the mating sequence to be disturbed and to ensure the best optical.
- There are 4 types of backshell available. They are compatible with standard electrical MIL-DTL-38999 Series III/EN3645 rear interface.
Ordering information
Type 1: Adaptor for use with a standard 38999 Series III/EN3645 backshell. Caution is necessary in the choice of the standard backshell: it must allow enough room to accomodate the push back of the cable during the connector mating. Type 2: Backshell for straight or right angled heat shrink boot (not supplied), suitable for tactical cables or protection tubes for example. Adapted to sealed and low mechanical retention applications. Type 3: Backshell with cable gland suitable for tactical cables only. Adapted to sealed and high mechanical retention applications. See table p.4 for dimension code depending on the shell size and the cable diameter. Type 4: Backshell derived from Type 3 without the cable gland. Suitable to adapt specific male threaded adaptors (not supplied) for ANAMET or PMA tubes for example. See table p.4 for the size of the female thread depending on the shell size. 8DABE 3 A F 13 F 01 Type: 1: Adaptor for standard 38999 Series III/EN3645 backshell (standard backshell not supplied) 2: Backshell for straight or right angled heat shrink boot (heat shrink boot not supplied) 3: Backshell with cable gland. See table p.4 for dimension code. 4: Backshell for specific male threaded adaptor for PMA or ANAMET tubes for example (not supplied). See table p.4 for thread dimensions Angle: A: Straight For other angle, please consult us. Coupling ring: F: Non self locking type For other system, please consult us. Shell size: 09, 11, 13, 19, 25 Material & Plating: Z: Aluminum black zinc nickel plating W: Aluminum olive green cadmium plating F: Aluminum nickel plating B: Bronze Dimension code: 01: Only for Type 3, see table p.4 No digit for other types.
16.5±0.4 ØB C A 43±0.4 ØB ØC A Note: All dimensions are in millimeters (mm) Size Thread A ØB±0.25 Thread C 09 M12x1 8.7 M12x1 11 M15x1 11.7 M15x1 13 M18x1 14.7 M18x1 19 M28x1 22.3 M28x1 21 M31x1 25.8 M31x1 25 M37x1 32.6 M37x1 Size Thread A ØB±0.25 ØC±0.2 09 M12x1 8.7 16.7 11 M15x1 11.7 19.7 13 M18x1 14.7 22.7 19 M28x1 22.3 26.6 21 M31x1 26.3 30.4 25 M37x1 32.6 36.8
Note: All dimensions are in millimeters (mm) Backshell Type 4 Size Thread A ØB±0.25 Thread D ØE±0.2 09 M12x1 8.7 M12x1.5 16.7 11 M15x1 11.7 M16x1.5 19.7 13 M18x1 14.7 M16x1.5 22.7 19 M28x1 22.3 M20x1.5 26.6 21 M31x1 26.3 M25x1.5 30.4 25 M37x1 32.6 M25x1.5 36.8 Backshell Type 3 DC = Dimension Code * with reducer ** with amplifier ØX inner hole diameter ØA L Shell size 09 11 13 19 21 25 Cable diameter acceptance ØA DC L ØX Max DC L ØX Max DC L ØX Max DC L ØX Max DC L ØX Max DC L ØX Max 3 to 6 mm 00 101 3.5 00 101 5 00 101 5 00* 104 5 00* 104 5 00* 104 5 5 to 7.8 mm 01 103 3.5 5 to 8 mm 01 101 5 01 101 7 01* 104 7 01* 104 7 01* 104 7 6 to 10 mm 02 114 5 02 114 7 02 102 11 02 105 11 02* 105 11 8 to 11.8 mm 03 115 5 03 115 7 8 to 12 mm 03 103 11 03* 106 11 03* 106 11 9.5 to 14 mm 04 116 11 04 104 14 04 104 14 11.5 to 15.8 mm 05 122 11 11.5 to 18 mm 05 110 14 05 110 14 15 to 20.8 mm 06 130 17 06 130 17 Dimensions 80±0.4 ØB ØE A D Note: Same marquing as Type 4. ØA cable outer jacket acceptance diameter
Total length with backshell Note: All dimensions are in millimeters (mm) Length unmated = C* + E* + 43mm + T + Rt + Dt Length mated = C* + D* + 43mm + T + Rt + Dt * See pages 5 & 6 T (see supplier datasheet) Rt (see supplier datasheet) Ø Dt (see supplier datasheet) L B C A L 9.90 22.60 Max L31.00 Max Type 0 Square Flange Receptacle Type 7 Jam Nut Receptacle Type 5 Plug
3.17 Max (Bronze)
3.20 Max (Aluminum & Stainless steel)
Type 0 & 7 Metal 20.90 Max 20.10 Max 12.50 Max 13.00 Max 2.50 Max 3.20 Max Receptacle Type 0 Composite Max 4.35 Max L Male insulator Female insulator 4 Max 6.60 Max
Total length with backshell D E F G D E F G Shell size 09 to 19 Shell size Shell size 09 to 19 Shell size Shell size 09 to 11 Shell size 13 to 25 Shell size 09 to 11 Shell size 13 to 25 Plug + Receptacle Type 0 & 7 Metal 37.00 Max 36.50 Max 52.30 Max 51.50 Max 39.00 Max 39.00 Max 54.00 Max 54.00 Max Plug + Receptacle Type 0 Composite 37.00 Max 36.50 Max 52.30 Max 51.50 Max N/A N/A N/A N/A Note: All dimensions are in millimeters (mm) WDSELIOBKSHWUSEN01 © Copyright SOURIAU July 2018 - SOURIAU is a registered trademark. All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement. Any duplication is prohibited, unless approved in writing. For further information contact us at technical-emear-ect@esterline.com (Europe - Asia - Africa) technical-americas-ect@esterline.com (North America) or visit our web site www.esterline-connection-technologies.com Type 2 - heat shrink boot not supplied
- 8DABE2AF13W with a straight boot on PMA tube
- 8DABE2AF13F with a right angled boot on tactical cable Type 3 - supplied with cable gland
- 8DABE3AF13W01 Type 4 - supplied without the specific adaptor
- 8DABE4AF13W with PMA tube adaptor Backshell use examples