881F LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

Electrical Characteristics for Series % of Ampere Rating Opening Time 100% 1 Hour, Min. 200% 60 Seconds, Max.

Applications

  • Blade Servers
  • Routers
  • High-power Battery Systems
  • Power Factor Correction (PFC) in high wattage power supplies
  • Power Distribution Units (PDUs)
  • Available in 70A, 80A, and 100A ratings
  • High interrupting rating - 1500A @ 75Vdc
  • With faster opening time response
  • Surface mountable high current fuse
  • Robust and solderless fuse design
  • Lead-free, Halogen-free, and RoHS compliant
  • UL Recognized to UL/CSA/NMX 248-1
  • Single fuse solution for high current applications
  • Suitable for a wide variety of voltage requirement and application
  • Guaranteed protection against overload and short circuit current events
  • Compatible with high volume assembly requirements
  • Enhanced product reliability and performance AGENCY AGENCY FILE NUMBER AMPERE RANGE E7161 1 70 – 100A NA 70 – 100A Ampere Rating (A) Amp Code Max Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (mOhms) Nominal Voltage Drop * (mV) Nominal Melting ** I2t (A2sec) Agency Approvals 70 070. 75Vdc 1500A @75Vdc 0.82 89 1050 X 80 080. 0.63 86 2000 X 100 100. 0.52 96 4800 X Ampere Rating In (A) Typical Case Temperature Rise (°C) * @ 50%In @ 75%In @ 100%In 70 16 38 73 80 25 58 88 100 32 60 127 Electrical Specifications by Item Thermal Characteristics * Typical values based on tests conducted with fuse mounted on FR-4 circuit board of 0.062” (1.6 mm) thickness with 6 oz. (210 µm) Cu. * Nominal Voltage Drop measured at 100% rated Current. ** Nominal Melting I2t measured at 1500A.

© 2019 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 04/24/19 Surface Mount Fuses High-Current > Fast Opening > 881F Series PERCENT OF RATING AMBIENT TEMPERATURE 100 120 140 160 25°C Average Time Current Curves Reflow Condition Pb – Free assembly Number of allowed reflow cycles 3 Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (Min to Max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp (TL) to peak 5°C/second max. TS(max) to TL - Ramp-up Rate 5°C/second max. Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/–5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max. Time 25°C to peak Temperature (TP) 8 minutes max. Do not exceed 260°C Soldering Parameters T emperature Re-rating Curve Note: 1 . Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. Example: For continuous operation at 70°C, the fuse should be re-rated as follows: I = (0.75)(0.90)IRAT = (0.675)IRAT 2. The temperature re-rating curve represents nominal conditions. For questions about the temperature re-rating curve, please consult Littelfuse technical support assistance. Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature (t 25ºC to peak) Ramp-down Ramp-up Preheat Critical Zone TL to TP 0.001 0.01 0.1 100 10 100 1000 10000 Time in second Current in Amperes 70A 80A 100A

© 2019 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 04/24/19 Surface Mount Fuses High-Current > Fast Opening > 881F Series Notes: 1. Based on loading at 75% of ampere rating when mounted using recommended pad layout. 2. Usage outside of stated operating temperature range requires testing in application. Maintain case temperature below 150°C in application. Thermal Shock MIL -Std 202 Method 107 Test Condition B (-65°C to 125°C, 5 cycles). Moisture Resistance MIL -Std 202 method 106 High Humidity (90-98%RH), Heat (65°C) Vibration MIL -STD-202, Method 201 (10-55 Hz) Mechanical Shock MIL -STD-202, Method 213, Test Condition I (100 G’s peak for 6 milliseconds) Resistance to Solder Heat MIL -Std 202 Method 210 Test Condition B (10sec at 260°C) Solderability MIL -STD-202 Method 208 MSL Test Level 1 J-STD-020 Salt Fog MIL -Std 202 Method 101 Test Condition B (5% NaCL solution, 48 hours exposure) Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code 24mm Tape and Reel EIA-481 Rev. D (IEC 60286, part 3) 500 UR Materials Body: Thermoplastic, RTI 150°C Terminations: Tin-plated Copper Product Marking Brand logo, Voltage Rating, ‘F’ (Faster Opening Time), and Ampere Rating Operating T emperature 1 2 -55° to +100°C with proper derating Product CharacteristicsDimensions Part Numbering System 0881 100. U R F SERIES AMP Code* QUANTITY Code PACKAGING Code F = FASTER OPENING TIME Refer to Electrical Specifications table U = 500 Pieces R = Tape and Reel *Example: 80 amp product is 088080.UR (100 amp product shown above) 11.2 (0.440“) 10.0 (0.393“) 6.3 (0.248“) 8.0 (0.314“) 6.4 (0.252“) 6.0 (0.236“) 6.8 (0.267“) 12.5 (0.492“) 1.6 (0.062") 3.0 (0.118") 10.0 (0.393“) Units in mm (inch) Recommended Pad Layout 6 oz. (210µm) minimum Cu layer Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.