87CP-727-M10SV

87CP SENSATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

Features

Description

Applications

• Enhanced accuracy over wide operating range
• Housing options are compatible with most media
• EMC protection to 30 V/m
• Broad operating temperature range (-40°C to 135°C)
• Exceptional shake and vibration tolerance
• Overvoltage and reverse polarity protection
• Small size and simple installation 87/88CP series pressure sensors are ideally suited for environmentally demanding OEM industrial applications. This series accommodates a wide range of input voltages (6 to 30 VDC), providing a 4 to 20 mA output.. Housed in stainless steel, plated steel or brass, the 87/88CP series offers performance and economy. Sensata Technologies has been a leading global supplier of pressure sensors and switches for over 50 years.
• Compressors & pumps
• Hydraulics & pneumatics
• Agriculture & construction equipment
• Transportation & off-road vehicles
• Engine controls & monitors
• Alternative energy management
• Load management
• Process control & automation
• Medical
• Military Pressure Ranges 87CP: 1 to 10, 11, 16, 19.2, 20, 31, 35, 45.8, 46, 50 BAR, 0 to 34.5 Bar, -0.8 to 7 Bar, -1 to 11Bar, Negative pressures apply to Gauge devices 88CP: 0 to 15, 18, 30, 34.5, 50 Bar, -1 to 11 Bar, Negative pressures apply to Gauge devices Other pressures available upon request Accuracy ±0.8% F.S. (linearity, hysteresis, repeatability and calibration) Total Error Band +2% / -3.5% F.S. (-20 to 135°C) Operating Temperature -40°C to 135°C Storage Temperature -40°C to +150°C Proof Pressure >1.5 times pressure range Burst Pressure >3 times pressure range Cycle Life Up to 34.5 BAR = 10M F.S. cycles Beyond 34.5 BAR = 5M F.S. cycles Random Vibration 10g (25 - 2000 Hz)

www.sensata.com Page 2 Copyright © 2022 Sensata Technologies, Inc. Mechanical Shock 100g (6 Hz, ½ sine) Drop (any Axis) 1.5m Supply Voltage 6 to 30 VDC Output Current Output: 4 to 20 mA Output Load (Vs-7)/0.02 Ohms Overvoltage Protection 39 VDC Reverse Voltage Protection -39 VDC Output Response Time 10mS max Short Circuit Protected Yes EMC (512 MHz to 1GHz) 30 V/m ESD (EN61000-4-2) 8KV in air, 4KV contact Dimensions in mm DIMENSIONAL DRAWINGS FOR 87CP & 88CP

66.04 MAX

10.160 28.70 MAX 1/8"-27 NPTF-2A 11/16" HEX UNDER BODY 13.97 MAX.

48.27 MAX

28.70 MAX

1/4" SAE FEMALE FLARE FITTING, WITH DEFLATOR 7/16"-20 UNF-2B THREAD 5/8" HEX UNDER BODY

23.495 MAX

"STANDARD" CONNECTION 17.27 24.60 15.75 PACKARD MATING CONNECTOR 87CP X X X XXX X X LOW PRESSURE, 4-20mA, STD ACCURACY CODE MATERIAL BRASS PLATED STEEL STAINLESS STEEL THREADCODE 1/8"-27 NPTF-2A 7/16"-20 UNF-2B W/ DEFLATOR HEX 11/16" UNDER 5/8" UNDER CODE SEAL MATERIAL F H N V FLUOROSILICONE HYDROGEN'D NITRILE NEOPRENE FLUOROCARBON (-45 C TO +135 C) (-20 C TO +135 C) (-37 C TO +120 C) (-26 C TO +135 C) SEAL TEMPERATURE ABSOLUTE (NO VENT) RELATIVE (VENT) SEALED GAGE (NO VENT) A G S CODE PRESSURE REFERENCE LOW PRESSURE RANGE CODE M07 M08 M10 M11 M12 M16 M19 M20 M31 M34 M35 M45 M46 OPERATING PRESSURE TWO TAIL PACKARD CONNECTOR STANDARD CODE HEX UNDER BODY HEXPORT MATERIAL FAMILY DESCRIPTION PRESSURE SEALS MATERIAL CONNECTOR: INSULATOR: PPO 30% GLASS FILLED TERMINALS: CDA 260 BRASS WITH Sn PLATE TWO TAIL PACKARD CONNECTOR "CONTRO" -0.8...7 BAR 1....10 BAR 1....11 BAR -1....11 BAR 1....16 BAR 1....20 BAR 1....31 BAR 0...34.5 BAR 1....35 BAR 1....46 BAR mA OUTPUTSPECIFICATIONS

6 TO 30 VDC

-20 C TO +135 C -40 C TO +150 C -40 C TO +135 C (Vs-7)/0.02 +/-1% SPAN@16Vdc <+/-0.75% SPAN -20 C TO +100 C 2% SPAN SPAN

39 Vdc

1.5 TIME PRESSURE RANGE >3 TIME PRESSURE RANGE

10 Grms(25-2000Hz)

30 V/m

8kV IN AIR,4kV CONTACT "CONTRO" CONNECTION DATE CODE XYYYZ, WHERE: X = LAST DIGIT OF YEAR YYY = DAY OF YEAR Z = SHIFT (A, B, C) DEVICE PART NUMBER CONNECTOR DESIGNED TO PART NUMBER 12078088 REV. 01 TO MATE WITH PACKARD CONNECTOR 12065287 REV. B1. POWER SUPPLY VOLTAGE1. ENVIRONMENTAL(AMBIANT) TEMPERATURE2. STORAGE TEMPERATURE 3. MEDIUM(FUILD) TEMPERATURE4. OUTPUT LOAD5. (WHERE Vs-ACTUAL SUPPLY V ) 6. PERFORMANCE(STATIC ERROR BAND @ 25°C) 7. LINEARITY 8. ERROR BAND 9. TOTAL ERROR BAND 10. OVERVOLTAGE/REVERSE PROTECTION 11. PROOF PRESSURE 12. BURST PRESSURE 13. RANDOM VIBRATION 14. EMC (512 MHz - 1 GHz acc,EN61000-4-3) 15. ESD (EN61000-4-2) NOTES: 1. APPLICATION NOTE:

• SENSATA PRESSURE SENSORS OF FAMILY 87CP/88CP ARE NOT INTENDED TO USE AS SAFETY DEVICES AND MAY NOT BE UTILIZED FOR THIS SAFETY FUNCTION.
• THE SENSOR MUST ONLY BE USED FOR PRESSURE MEASUREMENT; REGULATING THE APPLICATION.
• THE INFORMATION, RECEIVED FROM THE SENSOR BY CUSTOMER SOFTWARE, SHALL BE TRANSFERRED INTO A CUSTOMER CONTROL UNIT WHICH REGULATES/STEERS THE APPLICATION.
• NEXT TO THE SENSOR, THERE IS ALWAYS A HIGH-PRESSURE CUTOUT SWITCH MUST BE INSTALLED IN THE SAME APPLICATION, TO PROTECT THE SYSTEM. SHEET 1 OF 2 87CP H 87CP 4-20mA LOW PRESSURE TRANSDUCER ENVELOPE DRAWING H DEVICE: 87CP PROJECT: DATEECN NO.REVISION DESCRIPTION TOLERANCES DECIMALS ANGLES INTERPRET DIMENSIONING AND TOLERANCING PER ASME Y14.5-2009. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES. FOR REFERENCE ONLY, CHECK LATEST REVISION BEFORE USE. PARTS MADE TO THIS PRINT MUST CONFORM TO E9898 REV. E. REV. A ADDED PRESSURE RANGE AND OUTPUT CHARACTERISTICS;AM ECO-357640 24-Mar-2020 X.XXX .005 X.X 1 ZONE REV. TITLE DWG NO. SCALE 2:1 T. BREITENBACH ENGINEER DATE 12-OTC-2011 THIRD ANGLE PROJECTION SOLIDWORKS DATE DRAWN DATE DATE APPROVED APPROVED K. Maslova W. Alink 19-DEC-2017 19-DEC-2017

529 PLEASANT STREET

P.O. BOX 2964 ATTLEBORO, MA 02703 SIZE C SENSATA TECHNOLOGIES PROPRIETARY AND CONFIDENTIAL. NEITHER THIS PRINT NOR THE INFORMATION CONTAINED HEREON IS TO BE USED AGAINST THE INTERESTS OF SENSATA TECHNOLOGIES OR AGAINST THE INTERESTS OF ANY OF ITS AFFILIATED COMPANIES OR WHOLLY OWNED SUBSIDIARIES. DO NOT SCALE DRAWING B C D 3 2 1 3 24 1 B D A C 66.04 MAX 10.160 28.70 MAX 1/8"-27 NPTF-2A 11/16" HEX UNDER BODY 13.97 MAX. 1/4" SAE FEMALE FLARE FITTING, WITH DEFLATOR 7/16"-20 UNF-2B THREAD 5/8" HEX UNDER BODY "STANDARD" CONNECTION 17.27 24.60 15.75 PACKARD MATING CONNECTOR 87CP X X X XXX X X LOW PRESSURE, 4-20mA, STD ACCURACY CODE MATERIAL BRASS PLATED STEEL STAINLESS STEEL THREADCODE 1/8"-27 NPTF-2A 7/16"-20 UNF-2B W/ DEFLATOR HEX 11/16" UNDER 5/8" UNDER CODE SEAL MATERIAL F H N V FLUOROSILICONE HYDROGEN'D NITRILE NEOPRENE FLUOROCARBON (-45 C TO +135 C) (-20 C TO +135 C) (-37 C TO +120 C) (-26 C TO +135 C) SEAL TEMPERATURE ABSOLUTE (NO VENT) RELATIVE (VENT) SEALED GAGE (NO VENT) A G S CODE PRESSURE REFERENCE LOW PRESSURE RANGE CODE M07 M08 M10 M11 M12 M16 M19 M20 M31 M34 M35 M45 M46 OPERATING PRESSURE TWO TAIL PACKARD CONNECTOR STANDARD CODE HEX UNDER BODY HEXPORT MATERIAL FAMILY DESCRIPTION PRESSURE SEALS MATERIAL CONNECTOR: INSULATOR: PPO 30% GLASS FILLED TERMINALS: CDA 260 BRASS WITH Sn PLATE TWO TAIL PACKARD CONNECTOR "CONTRO" -0.8...7 BAR 1....10 BAR 1....11 BAR -1....11 BAR 1....16 BAR 1....20 BAR 1....31 BAR 0...34.5 BAR 1....35 BAR 1....46 BAR mA OUTPUTSPECIFICATIONS -20 C TO +135 C -40 C TO +150 C -40 C TO +135 C (Vs-7)/0.02 +/-1% SPAN@16Vdc <+/-0.75% SPAN -20 C TO +100 C 2% SPAN SPAN

1.5 TIME PRESSURE RANGE >3 TIME PRESSURE RANGE

8kV IN AIR,4kV CONTACT "CONTRO" CONNECTION DATE CODE XYYYZ, WHERE: X = LAST DIGIT OF YEAR YYY = DAY OF YEAR Z = SHIFT (A, B, C) DEVICE PART NUMBER CONNECTOR DESIGNED TO PART NUMBER 12078088 REV. 01 TO MATE WITH PACKARD CONNECTOR 12065287 REV. B1. POWER SUPPLY VOLTAGE1. ENVIRONMENTAL(AMBIANT) TEMPERATURE2. STORAGE TEMPERATURE 3. MEDIUM(FUILD) TEMPERATURE4. OUTPUT LOAD5. (WHERE Vs-ACTUAL SUPPLY V ) 6. PERFORMANCE(STATIC ERROR BAND @ 25°C) 7. LINEARITY 8. ERROR BAND 9. TOTAL ERROR BAND 10. OVERVOLTAGE/REVERSE PROTECTION 11. PROOF PRESSURE 12. BURST PRESSURE 13. RANDOM VIBRATION 14. EMC (512 MHz - 1 GHz acc,EN61000-4-3) 15. ESD (EN61000-4-2) NOTES: 1. APPLICATION NOTE:

• SENSATA PRESSURE SENSORS OF FAMILY 87CP/88CP ARE NOT INTENDED TO USE AS SAFETY DEVICES AND MAY NOT BE UTILIZED FOR THIS SAFETY FUNCTION.
• THE SENSOR MUST ONLY BE USED FOR PRESSURE MEASUREMENT; REGULATING THE APPLICATION.
• THE INFORMATION, RECEIVED FROM THE SENSOR BY CUSTOMER SOFTWARE, SHALL BE TRANSFERRED INTO A CUSTOMER CONTROL UNIT WHICH REGULATES/STEERS THE APPLICATION.
• NEXT TO THE SENSOR, THERE IS ALWAYS A HIGH-PRESSURE CUTOUT SWITCH MUST BE INSTALLED IN THE SAME APPLICATION, TO PROTECT THE SYSTEM. SHEET 1 OF 2 87CP H 87CP 4-20mA LOW PRESSURE TRANSDUCER ENVELOPE DRAWING H DEVICE: 87CP PROJECT: DATEECN NO.REVISION DESCRIPTION TOLERANCES DECIMALS ANGLES INTERPRET DIMENSIONING AND TOLERANCING PER ASME Y14.5-2009. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES. FOR REFERENCE ONLY, CHECK LATEST REVISION BEFORE USE. PARTS MADE TO THIS PRINT MUST CONFORM TO E9898 REV. E. REV. A ADDED PRESSURE RANGE AND OUTPUT CHARACTERISTICS;AM ECO-357640 24-Mar-2020 X.XXX .005 X.X 1 ZONE REV. TITLE DWG NO. SCALE 2:1 T. BREITENBACH ENGINEER DATE 12-OTC-2011 THIRD ANGLE PROJECTION SOLIDWORKS DATE DRAWN DATE DATE APPROVED APPROVED K. Maslova W. Alink 19-DEC-2017 19-DEC-2017

P.O. BOX 2964 ATTLEBORO, MA 02703 SIZE C SENSATA TECHNOLOGIES PROPRIETARY AND CONFIDENTIAL. NEITHER THIS PRINT NOR THE INFORMATION CONTAINED HEREON IS TO BE USED AGAINST THE INTERESTS OF SENSATA TECHNOLOGIES OR AGAINST THE INTERESTS OF ANY OF ITS AFFILIATED COMPANIES OR WHOLLY OWNED SUBSIDIARIES. DO NOT SCALE DRAWING B C D 3 2 1 3 24 1 B D A C

www.sensata.com Page 3 Copyright © 2022 Sensata Technologies, Inc. ORDERING OPTIONS Example : 87CP725M10AN Family 87CP: 4 - 20 mA STD ACCURACY 88CP: 4 - 20 mA STD ACCURACY Hexport Material 7:BRASS 8: PLATED STEEL 9: STAINLESS STEEL Hex Under Body 2: 1/8”- 27 NPTF-2A, HEX 11/16” UNDER 5: 7/16”-20 UNF-28 W/DEFLATOR, HEX 5/8” UNDER Electrical Connector 5: TWO TAIL PACKARD CONNECTOR STANDARD 7: TWO TAIL PACKARD CONNECTOR “CONTRO” Pressure Range 87CP M07: -0.8...7 BAR M08: 0.5...8BAR M10: 1...10BAR M11: 1...11BAR M12: -1...11BAR M16: 1...16BAR M19: 1...19.2BAR M20: 1...20BAR M31: 1...31BAR M34: 0...34.5BAR M35 : 1...35BAR M45: 1...45.8BAR M46: 1...46BAR 88CP M11: -1...11BAR M35: 0...34.5 BAR M15: 0...15BAR M50: 0...50BAR M18: 0...18BAR M30: 0...30BAR Pressure Reference A: ABSOLUTE (NO VENT) G: RELATIVE (VENT) S: SEALED GAGE (NO VENT) Pressure Seals F: FLUOROSILICONE (-45°C TO +135°C) H: HYDRONEN’D NITRILE (-20°C TO +135°C) N: NEOPRENE (-37°C TO +120°C) V: FLUOROCARBON (-26°C TO +135°C) 87CP - 7 2 5 - M10 A N Seal Compatibility Guide Seal Material Media Compatibility Max Seal Temperature Range Nitrile (BUNA-N, NBR) Petroleum oils, lubricants, detergent solutions, helium -20°C to 100°C HNBR (Hydrogenated Nitrile) Petroleum oils, lubricants, detergent solutions -20°C to +135°C Ethylene Propylene Steam, soaps, polar solvents, brake fuilds, acetone, Skydrol™ -40°C to +135°C Seal Material Media Compatibility Max Seal Temperature Range Fluorosilicone Chlorinated solvents, oils, fuels, air -40°C to +135°C Neoprene Refrigerants (freons/ammonia) -40°C to +120°C Fluorocarbon (Viton™) Fertilizers, freons, butanes, oils, trichlorethylene -35°C to +135°C BRASS HEXPORT, 1/8" - 27 NPTF - 2A MALE, TWO TAIL PACKARD CONNECTOR STANDARD, 1 TO 10 BAR, ABSOLUTE (NON VENTED), NEOPRENE INTERNAL O-RING.

www.sensata.comCopyright © 2022 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. CONTACT US Rev.06/02/2022 Americas +1 (800) 350 2727 sensors@sensata.com switches@sensata.com Europe, Middle East & Africa +359 (2) 809 1826 pressure-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 AGENCY APPROVALS & CERTIFICATES