8730HT

8730HT 3M | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

3M™ Polyurethane Protective Tape 8730HT Technical Data Sheet Product Description 3M™ Polyurethane Protective Tape 8730HT (high temperature) is made from a UV stable polyurethane elastomer that resists punctures, tearing, and abrasion. 3M 8730HT Tape is specifically designed for use in elevated temperature applications. It provides a simple, easy method of protecting a surface from corrosion, erosion, and minor impact damage. It can be painted or applied over painted surfaces. The tape is constructed with a pressure sensitive acrylic adhesive that is protected with an easy release plastic liner. Typical Physical Properties and Performance Characteristics Note: 1) The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 2) ASTM = American Society for Testing and Materials. 3) Metric values are listed in parenthesis Property Test Method Units Typical Value Tensile Strength @ Break ASTM D882 lb./in. (N/100 mm) 83 (1453) Elongation % @ Break ASTM D882 % 500 Peel Adhesion @ 70°F (21°C) to: Bare Aluminum 2043 T3

304 Brite #7 Stainless Steel

MIL-PRF-85285 Paint* ASTM D-3330 Method A 24 hr dwell oz./in. (N/100 mm) 100 (109) 80 (88) 110 (120) Taber Abrasion Mass Loss ASTM C50 H18, 1kg, 1000 cycles g 0.025 Hardness ASTM D2240 Shore A 80 Thermal Conductivity ASTM C177 W/m•K 0.18 Temperature Capability 3M 8730HT Tape can be used in applications with continuous temperatures up to 250°F (121°C). *Paint sanded with 320 grit sandpaper and tape applied using 3M™ Protective Tape Application Solution. Dimensions Approximate Applied Thickness* 0.012 inch (0.30 mm) Film 0.002 inch (0.06 mm) Adhesive 0.014 inch (0.36 mm) Total thickness Standard Roll Length 36 yd. (32.9 m) Available Widths Minimum 1 inch Maximum 24 inches (1.25 cm to 61 cm) Approximate Weight* 0.80 lb/yd2 (436 g/m2) *Excludes the plastic liner that is removed from the tape prior to application.

3M™ Polyurethane Protective Tape 8730HT Shipping and Storage No special/hazardous labeling or packaging required or regulations for air, ground or water shipment for this product. Keep film in a clean area, away from excessive moisture and out of direct sunlight. Store rolls in the shipping carton. Return partially used rolls to the shipping carton. Shelf life: Two (2) years from date of manufacture Additional Information 5714. If you are outside of the U.S., please contact your nearest 3M representative. These products were manufacture under a 3M Quality Management System registered to the AS9100 standard Automotive & Aerospace Solutions Division 3M Center St. Paul, MN 55144-1000 Phone 1-800-328-1684 Web www.3M.com/aerospace 8730HT Issue date: 6/2018 3M is a trademark of 3M Company © 3M 2018. All rights reserved. Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Product Selection and Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property. Warranty, Limited Remedy, and Disclaimer: Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.