871-IF38.912M-E OSCILENT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Part Number Package Application Last Modified 871-IF38.912M-E 11.5 x 4.8 SMD DAB Jan. 01, 2007 TYPE :
38.912 MHz IF SAW Filter for DAB Application
1.5 MHz Bandwidth
PART NUMBER : 871-IF38.912M-E OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency - 38.912 - MHz Insertion Loss at Fo - 17.0 19.0 dB -3.0 dB Bandwidth - 1.5 - MHz -30.0 dB Bandwidth - 2.7 - MHz Relative Attenuation 30.00 to 36.26 MHz 40 45 - dB Relative Attenuation 36.26 to 37.30 MHz 40 48 - dB Relative Attenuation 40.60 to 41.40MHz 40 48 - dB Relative Attenuation 41.40 to 50.00MHz 40 50 - dB Source Impedance (Single Ended or Balanced)* - 50/2000 - ohm Load Impedance (Single Ended or Balanced)* - 50/2000 - ohm Group Delay Variation - 80 200 ns Storage Temperature -40 - +85 ppm/°C Operating Temperature -30 - +80 °C Temperature Coefficient - -20 - ppm/°C Absolute Delay at Fo - 1.36 - µsec * With Matching Network (Ref. Testing Environment Circuit as shown below) Those impedances could be modified with different impedance values and/or structures, if necessary. ** Custom SAW IF Filters available. Contact Oscilent for assistance. PACKAGE OUTLINE (mm) Page 1 of 3Oscilent Corporation IF SAW Filter | 871-IF38.912M-E
SOURCE AND LOAD IMPEDANCE: 50 or 2K ohm FREQUENCY RESPONSE Page 2 of 3Oscilent Corporation IF SAW Filter | 871-IF38.912M-E
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map GROUP DELAY VARIATION Part No.: 871-IF38.912M-E Page 3 of 3Oscilent Corporation IF SAW Filter | 871-IF38.912M-E