8667HS 3M | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
3M™ Polyurethane Protective Tape 8667HS Technical Data Sheet Product Description 3M™ Polyurethane Protective Tape 8667HS is made from a tough, abrasion-resistant polyurethane elastomer that resists punctures, tearing, abrasion and erosion. It provides a simple, easy, and fast method of protecting a surface from corrosion, abrasion, erosion and minor impact damage. 3M 8667HS tape is constructed with a long-aging, solvent resistant, high sheer (HS) pressure sensitive acrylic adhesive that is protected with an easy-release poly liner. 3M 8667HS tape has a matte surface finish and is available in transparent, matte black and gray (36375 and 36173). Typical Physical Properties and Performance Characteristics 1. The following technical information and data should be considered repetitive of typical only and should not be used for specification purposes. 2. ASTM = American Society of Testing and Materials. 3. Metric values are listed in parenthesis. Dimensions Approximate applied Thickness* Total Thickness 0.028 inch (0.71 mm) 0.025 inch (0.63 mm) Backing 0.003 inch (0.08 mm) Adhesive Standard Roll Length 36 yd (32.9 m) Available Widths Minimum 1 inch Maximum 24 inches (2.55 cm to 61 cm) Approximate Weight* 1.52 lb/yd2 (825 g/m2) * Excludes the poly liner that is removed from the tape prior to application. Typical Physical Properties and Performance Characteristics: Property Test Method Units U.S. (SI) Typical Value Tensil Strength @ Break ASTM D882 lb/in (N/100 mm) 120 (2,106) Elongation % @ Break ASTM D882 % 500 Peel Adhesion @ 70°F (21°C) to: Bare Aluminum Acrylic Enamel Paint ABS Plastic ASTM D-1000 oz/in (N/100 mm) 72 (79) 52 (57) 55 (60) Max. Service Temperature °F (°C) 180ºF (82°C)
3M™ Polyurethane Protective Tape 8667HS 2 Shipping and Storage No special/hazardous labeling or packaging required and no regulations for air, ground or water shipment for this product. Keep film in clean area, away from excessive moisture and out of direct sunlight. Store rolls in the shipping carton Return partially used rolls to shipping carton. Shelf Life: Two (2) years from data of manufacture or as expressly certified by 3M . Additional Information 5714. If you are outside of the U.S., please contact your nearest 3M representative. These products were manufacture under a 3M Quality Management System registered to the AS9100 standard Automotive & Aerospace Solutions Division 3M Center St. Paul, MN 55144-1000 Phone 1-800-328-1684 Web www.3M.com/aerospace 8667HS Issue date: 6/2018 3M is a trademark of 3M Company © 3M 2018. All rights reserved. Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Product Selection and Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property. Warranty, Limited Remedy, and Disclaimer: Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.