8663HS

8663HS 3M | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

3M™ Polyurethane Protective Tape 8663HS Technical Data Sheet Product Description 3M™ Polyurethane Protective Tape 8663HS is made from a polyurethane elastomer that resists punctures, tearing, abrasion erosion and ultraviolet light. 3M 8663HS Tape provides a simple, easy method of protecting a surface from corrosion, abrasion and minor impact damage. It can be installed in a minimum amount of time with simple tools. It can be painted or applied over painted surfaces. 3M 8663HS Tape is constricted with a long aging, solvent -resistant, pressure sensitive acrylic adhesive that is protected with an easy-to-release poly liner. 3M 8663HS Tape is available in matte transparent or matte black color. 3M 8663HS Tape is available in two liner configurations: 1. Single poly line on the adhesive side 2. Single skip-slit poly liner on the adhesive side. Skip-slit liners are cut into narrow strips to enable easy installation. Typical Physical Properties and Performance Characteristics 1. The following technical information and data should be considered repetitive of typical only and should not be used for specification purposes. 2. ASTM = American Society of Testing and Materials. 3. Metric values are listed in parenthesis. Dimensions Approximate applied Thickness* 0.016 inch (0.40 mm) Film 0.002 inch (0.05 mm) Adhesive Total Thickness 0.018 inch (0.45 mm) Standard Roll Length 36 yd (32.9 m) Available Widths Minimum ½ inch Maximum 24 inches (1.25 cm to 61 cm) Approximate Weight* 1.04 lb/yd2 (517 g/m2) * Excludes the polyethylene liner that is removed from the tape prior to application. Typical Physical Properties and Performance Characteristics: Property Test Method Units U.S. (SI) Typical Value Tensil Strength @ Break ASTM D412 lb/in (N/100 mm) 117 (2,049) Hardness ASTM D2240 Shore A 80 Elongation % @ Break ASTM D882 % 400 Peel Adhesion @ 70°F (21°C) to: Anodized, Alclad Aluminum Glossy Polyurethane Paint Mil-P-27733 Epoxy Primer

304 Brite #7 Stainless Steel

ASTM D-3330, 24 hr dwell oz/in (N/100 mm) 110 (120) 45 (49) 110 (120) 60 (66) Max. Service Temperature °F (°C) 180ºF (82°C)

3M™ Polyurethane Protective Tape 8663HS 2 General Information

• 3M™ Polyurethane Protective Tape has weather resistance properties and has been used to isolate and protect substrates from environmental damage and corrosive elements.
• Polyurethane Protective Tape may be painted per 3M Technical Bulletin, Polyurethane Protective Tape, Painting instructions Shipping and Storage No special/hazardous labeling or packaging required and no regulations for air, ground or water shipment for this product. Keep film in clean area, away from excessive moisture and out of direct sunlight. Store rolls in the shipping carton Return partially used rolls to shipping carton. Shelf Life: Two (2) years from data of manufacture or as expressly certified by 3M . Additional Information 5714. If you are outside of the U.S., please contact your nearest 3M representative. These products were manufacture under a 3M Quality Management System registered to the AS9100 standard Automotive & Aerospace Solutions Division 3M Center St. Paul, MN 55144-1000 Phone 1-800-328-1684 Web www.3M.com/aerospace 8663HS Issue date: 6/2018 3M is a trademark of 3M Company © 3M 2018. All rights reserved. Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Product Selection and Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. As a result, customer is solely responsible for evaluating the product and determining whether it is appropriate and suitable for customer’s application, including conducting a workplace hazard assessment and reviewing all applicable regulations and standards (e.g., OSHA, ANSI, etc.). Failure to properly evaluate, select, and use a 3M product and appropriate safety products, or to meet all applicable safety regulations, may result in injury, sickness, death, and/or harm to property. Warranty, Limited Remedy, and Disclaimer: Unless a different warranty is specifically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost profits or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.