8646A APEM | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
- Case : diallylphthalate (DAP)
- Actuator : brass, nickel plated
- Bushing : brass, nickel plated
- Housing : stainless steel
- Contacts A : silver AD : silver, gold plated CD : brass, gold plated
- Terminal seal : epoxy APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. MATERIALS
- Torque : 1.25 Nm (.922 Ft.lb) max. applied to nut
- Total travel : 2.70 mm (.106)
- Operating temperature : -40 °C to +85 °C (-40 °F to +185 °F) GENERAL SPECIFICATIONS
- Max. current/voltage rating with resistive load : - silver contacts : 4 A 30 VDC - gold plated contacts : 0.4 VA max. 20 VAC or DC
- Initial contact resistance : 10 mΩ max.
- Insulation resistance : 1,000 MΩ min. at 500 VDC
- Dielectric strength : 1,000 Vrms 50 Hz min. between terminals 2,000 Vrms 50 Hz min. between terminals and frame
- Electrical life : 30,000 cycles at full load ELECTRICAL SPECIFICATIONS Momentary or alternate Bushing Ø 6.35 (1/4) and Ø 11.9 (15/32) UL approved DISTINCTIVE FEATURES 8000 series Momentary or alternate action pushbutton switches The company reserves the right to change specifications without notice. PANEL SWITCHES SW-8000-1808
3 A 250 VAC,
6 A 125 VAC
Availability : consult factory for details of approved models. Marking : to order switches marked UL, complete appropriate box of ordering format. AGENCY APPROVAL Momentary or alternate action pushbutton switches 8000 series TERMINALS (.070) (.043) (.145) (.074) 3.70 1.90 1.80 1.10 (.208) (.157) 5.30 4.00 (.043) 1.10 Standard With K sealing option Ø6.50 Ø2.20 5.20 (.255 DIA) (.086 DIA) (.204) (.255 DIA) Ø6.50 1.102.70 (.106) (.043) Ø6.50 Ø2.20 5.20 (.255 DIA) (.086 DIA) (.204) (.255 DIA) Ø6.50 1.102.70 (.106) (.043) PANEL CUT-OUT Funct. 6 (ON-ON) Funct. 2 (ON-MOM) 1 23 12 31 231 23 12 31 23 ELECTRICAL FUNCTIONS KEYWAY Solder lug Straigh PC PANEL SWITCHES
3 Single pole
4 Double pole
2 ON - MOM
6 ON - ON
4 Straight PC or right
6 Solder lug terminals
All models with Ø 6.35 threaded bushing. BUILD YOUR PART NUMBER 8000 series Momentary or alternate action pushbutton switches TERMINALS Blank Solder lugs or straight PC depending on model W Right angle OPTIONS A Silver AD Silver, gold plated CD Brass, gold plated CONTACT MATERIALS Blank No sealing B Epoxy sealed terminals K Front panel sealing by O-ring and sealing washer SEALING U900 Ø 5 (.196) U1140 Ø 8 (.314) U1720 Ø 9.4 (.370) U480 Ø 10 (.393) Standard U630 Ø 15 (.590) U2430 Square Height 4 (.157) U2020 Square Height 6 (.236) CAPS X718 Bushing Ø 11.9 (15/32) X934 Flatted bushing Ø 11.9 (15/32) + front panel sealing SPECIAL OPTIONSPLUNGERS For bushing Ø 6.35 (1/4) Blank Height 6.3 (.248) -9 Height 8.8 (.346) For bushing Ø 11.9 (15/32) Blank Height 8.6 (.338) -6 Height 7 (.275) APPROVAL UL Consult factory for details of approved models. ORDER SEPARATELY. ABOUT THIS SERIES Notice : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Sealing boots are available to protect the switches against dust and water. See "Sealing Boots" section of website. Mounting accessories : standard hardware supplied with all models : 2 hex nuts 8 mm (.314) across flats, 1 locking ring and 1 lockwasher. Standard and special hardware available is presented in the “Hardware“ section of website. On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart. PANEL SWITCHES
6.307.00 12.00 4.75 4.00 0.80 0.50 7.00 Ø4.00 Ø10.00 13.20Ø6.35-40UNS (.472) (.275) (.519)(1/4-40UNS) (.157 DIA) (.393 DIA) (.187) (.157) (.019) (.767)(.157) (.283) 7.20 19.504.00 (.043) 1.10 (.157) (.157) (.187) (.062 DIA) 4.00 4.00 Ø1.60 4.75 1 2 3 STRAIGHT PC TERMINALS : 8400 RIGHT ANGLE TERMINALS HORIZONTAL : 8400W (.248) (.393 DIA) (.157 DIA) (1/4-40UNS) (.519) Ø6.35-40UNS 13.20 Ø10.00 Ø4.00 6.30 (.275) 7.00 (.031) (.019) (.157) 0.50 4.00 0.80 (.433) (.283) (.338)(.500)(.150) (.043) (.015) (.145) (.472) (.338)(.500) 12.70 8.60 0.40 3.81 1.10 12.70 8.60 7.2011.00 (.472) (.145) 3.70 12.00 12.00 3.70 (.062 DIA) Ø1.60 4.00 (.157) 3.81 12.70 5.08 (.150) (.500) (.200) (.062 DIA) Ø1.60 (.157) 4.00 (.196) (.500) 5.08 12.70 3 2 1 SOLDER LUG TERMINALS : 8600 (.275) (.248) (.145) (.031) (.019) (.157) (.070)(.187) (.393 DIA) (.157 DIA) (1/4-40UNS) (.519) (.275)(.472) Ø6.35-40UNS 13.20 Ø10.00 Ø4.00 1.80 7.00 0.50 0.80 4.00 4.75 12.00 7.00 6.30 3.70 (.716) 18.20 (.283) 7.20 1 2 3 Momentary or alternate action pushbutton switches 8000 series 8642 8646 Double pole 2-3 2-3 5-6 1-2 1-2 4-5 8632 8636 Single pole ON ON ON ON MOM MOM ON ON 8442 8446 Double pole 2-3 2-3 5-6 1-2 1-2 4-5 8432 8436 Single pole ON ON ON ON MOM MOM ON ON 8442W 8446W Double pole 2-3 2-3 5-6 1-2 1-2 4-5 8432W 8436W Single pole ON ON ON ON MOM MOM ON ON KEYWAY Shown with standard plunger KEYWAY KEYWAY PANEL SWITCHES
Momentary or alternate action pushbutton switches BASIC P/N CONTACT MATERIALS BASIC P/N SEALING A Silver AD Silver, gold plated CD Brass, gold plated Blank No sealing K Frontal sealing by O-ring and sealing washer. Protects the switch against water and dust. Panel seal withstands 1 bar pressure. B Epoxy sealed terminals KB Combined sealings Sealing boot : see "Sealing boots" section of website. BASIC P/N PLUNGERS O-ring Sealing washer 2Maxi□ (.078 Max) (.417 DIA) (.090) (.464 DIA) (.251 DIA) (.228) Ø10.60 Ø11.80 5.80 2.30Ø6.40 FOR Ø 6.35 (1/4) BUSHING Dash compulsory before plunger code. 7.00 14.20 Ø4.00 Ø6.35-40UNS (1/4-40UNS) (.157 DIA) (.275) (.559) (.346) 8.80 (.559) (.275) (.248) (.157 DIA) (1/4-40UNS) Ø6.35-40UNS Ø4.00 14.206 .30 7.00 Blank Standard FOR Ø 11.9 (15/32) BUSHING (X718 MODELS) (.472) (.334) (.157 DIA) (15/32-32UNS) Ø4.00 Ø11.90-32UNS 8.5012.00 12.00 Ø11.90-32UNS (15/32-32UNS) (.472) (.275) 7.00 (.251DIA) Ø6.40 Blank Standard B K PANEL SWITCHES
Momentary or alternate action pushbutton switches 8000 series BASIC P/N SPECIAL OPTIONS X601 Silver plated brass contacts Current/voltage rating for an electrical life of 20,000 cycles : 0.5 A 30 VDC. Minimum quantity : 5,000 pieces per model and shipment. X718 Bushing Ø 11.9 (15/32) For all basic models (solder lug, straight PC or right angle terminals) Available with plungers shown on previous page (Standard and -6) K sealing option available. X748 Snap-in mounting. Consult factory. Panel cut-out 15 x 12.5 (.59 x .492) X934 Flatted bushing Ø 11.9 (15/32) + sealing by two O-rings (for plunger -6 only). Epoxy sealed terminals. 1 2 3 (.157) (15/32-32UNS) 11.00 12.008 .60 Ø11.90-32UNS Ø4.00 1.70 Ø12.00 5.109.60 Ø3.50Ø12.50 (.472 DIA)(.137 DIA)(.492 DIA) (.066) (.200)(.377) C80X Page 5 Le 24-09-92 ECH: 0.7 Ø11.90-32UNS (15/32-32UNS) 321 (.314 MAX) (.059) (.251) 10.507 .0012.50 1.50
8 Maxi
Ø6.40 (.200) (.472 DIA) 5.10 Ø12.00 C80X934-A EPOXY OPTION X718 OPTION X934 BASIC P/N AGENCY APPROVAL UL Availability : consult factory for details of approved models. Marking : to order switches marked UL, complete above box with ”UL”. KEYWAY KEYWAY PANEL SWITCHES
The caps below are for Ø 4 mm plungers (standard and -9), except U2600. U1140 (.250) (.314) (.118) 3.00 6.35 Ø8.00 U1720 (.118) (.370) (.250) 3.00 6.35 Ø9.40 U630 (.590 DIA) (.393) (.118) 3.00 10.00 Ø15.00 U900 (.157) (.196) (.129) 4.00 3.30 Ø5.00 (.118) (.393) (.295) Ø10.00 7.50 3.00 U480 Standard Order separately Chrome plated. DRESS NUTS 8000 series Momentary or alternate action pushbutton switches (.452 SQ) (.157) (.196) 4.00 3.00 11.50x11.50 U2430 Square (.236) (.452 SQ) (.195) 6.00 5.00 11.50x11.50 U2020 Square (.511 DIA) (.236) (.118) 3.00 6.00 Ø13.00 U2600 For large plunger -6 only. (.322 DIA) (.500 DIA) (1/4-40UNS) (.322) (.244) Ø12.70 Ø8.20 6.20 8.20 Ø6.35-40UNS U1636 For cap U1140 (.610 DIA) (.728 DIA) Ø18.50 Ø15.50 Ø6.35-40UNS (1/4-40UNS) 8.00 (.314) (.228) 5.80 U825 For cap U630 (.413 DIA) (.531 DIA) (.314) (.228) Ø10.50 Ø13.50 5.80 8.00 Ø6.35-40UNS (1/4-40UNS) U840 For cap U480 Cap colors Replace last "0" by number :