85W-1A DBLECTRO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
The 85W Series attains high carry current of 100A (pulse) at single contact. This series controls stable operation under super high-load conditions to satisfy a broad range of industry requirements, such as IG-BT test, FET test and DC switching for solar system. High Power / Current y a l e R y r u c r e M 85W-1A□0E0 High Power / Current Parameters Units 1 Form A Test Conditions Coil Specifications Nominal Coil Voltage Coil Resistance Operate Voltage Release Voltage VDC Ω VDC Max VDC Min 12.0 10.2 1.2 24.0 135 20.4 2.4 ±10% @ 20˚C 15˚C to 35˚C 15˚C to 35˚C Contact Ratings Switching Voltage Switching Current Carry Current Carry Current (Pulse) Contact Rating Life Expectancy Contact Resistance Contact Resistance Stability Volts Amps Amps Amps Watts x106 Cycle mΩ mΩ 240 100 3600 1000 2.0 Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC Resist @ 1V 10mh Max initial @ operate voltage Max initial @ operate voltage Relay Specifications Insulation Resistance Dielectric Strength Operate Time (No Bounce) Release Time Ω Min VDC Min VDC Min msec Max msec Max 1010 2500 2500 80.0 80.0 Between all isolated pins @ 100V 20˚C 40%RH Between contacts Contacts to coil @ nominal coil voltage 1Hz square wave Diode suppression Environmental Ratings Measurement Reference Conditions Temp: 15˚C to 35˚C Humidity: 25% to 75%RH Atmospheric Pressure: 860 to 1060hpa Storage temp: -20˚C to +80˚C Operate temp: -10˚C to +60˚C Vibration: 20G’s to 2000Hz Shock: 50G’s Ordering Code: 85W-1A□0E0 125 85W 100Amp Series
(110.0) (98.0) (26.0) (5.0) (6.0) (24.0) (12.0) 1.024 +0.02 -0.02 0.945 +0.02 -0.02 0.984 LED P1 P2 (25.0) 0.551 0.394 (14.0) (10.0) 0.315 (8.0) (3.0) 0.118 0.472 +0.02 -0.02 0.2360.197 1.89 MAX 0.5913.465 MAX 0.591 (15.0) (47.0) 1.85 MAX (118.0) 4.646 4.331 +0.04-0.04 +0.04-0.04 3.858 +0.04-0.04 P2(-)P1(+) UP UP 85W-1A 0E0 y a l e R y r u c r e M Note: Hg wet contacts must be mounted within 30 of vertical plane. 126