85010096

80010901 KATHREIN | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 9

Technical content

Adjust. Electr. DT set by

80010901 Page 1 of 4

Type No. 80010901 Left side, lowband R1, connector 1–2R1, connector 1–2 698–960 Frequency Range MHz 698 – 806 791 – 862 824 – 894 880 – 960 Gain at mid Tilt dBi 14.8 15.4 15.6 15.9 Horizontal Pattern: Azimuth Beamwidth ° 62 ± 3.9 61 ± 3.2 60 ± 2.7 60 ± 2.1 Front-to-Back Ratio, Total Power, ± 30° dB > 22 > 25 > 27 > 25 Cross Polar Discrimination over Sector dB > 8.5 > 10.5 > 11.5 > 11.0 Azimuth Beam Port-to-Port Tracking dB < 1.5 < 1.0 < 1.0 < 1.5 Vertical Pattern: Electrical Downtilt continuously adjustable ° 2.0 – 12.0 Tilt Accuracy ° < 0.7 < 0.7 < 0.7 < 0.7 First Upper Side Lobe Suppression dB > 14 > 14 > 15 > 14 Cross Polar Isolation dB > 30 Port to Port Isolation dB > 27 (R1 // R2) Max. Effective Power per Port W 400 (at 50 °C ambient temperature) Max. Effective Power Port 1–2 W 800 (at 50 °C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. 698–960698–960 XX 65°65° 2°–12°2°–12° R2R2R1R1 Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082 All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com

Right side, lowband R2, connector 3–4R2, connector 3–4 698–960 Frequency Range MHz 698 – 806 791 – 862 824 – 894 880 – 960 Gain at mid Tilt dBi 14.8 15.3 15.5 15.8 Horizontal Pattern: Azimuth Beamwidth ° 63 ± 3.6 62 ± 1.8 62 ± 2.1 60 ± 3.7 Front-to-Back Ratio, Total Power, ± 30° dB > 22 > 24 > 26 > 27 Cross Polar Discrimination over Sector dB > 8.0 > 12.5 > 13.0 > 13.0 Azimuth Beam Port-to-Port Tracking dB < 1.5 < 1.5 < 1.0 < 2.0 Vertical Pattern: Electrical Downtilt continuously adjustable ° 2.0 – 12.0 Tilt Accuracy ° < 0.7 < 0.6 < 0.6 < 0.5 First Upper Side Lobe Suppression dB > 14 > 16 > 16 > 16 Cross Polar Isolation dB > 30 Port to Port Isolation dB > 27 (R2 // R1) Max. Effective Power per Port W 400 (at 50 °C ambient temperature) Max. Effective Power Port 3–4 W 800 (at 50 °C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082 All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com

80010901 Page 3 of 4

Electrical specifi cations, all systems Impedance Ω 50 VSWR < 1.5 Return Loss dB > 14 Interband Isolation dB > 27 Passive Intermodulation dBc < –153 (2 x 43 dBm carrier) Polarization ° +45, –45 Max. Effective Power for the Antenna W 1200 (at 50 °C ambient temperature) Values based on NGMN-P-BASTA (version 9.6) requirements. Mechanical specifi cations Input 4 x 4.3-10 female Connector Position bottom Adjustment Mechanism FlexRET, continuously adjustable Wind load (at Rated Wind Speed: 150 km/h) (93 mph) N | lbf Frontal: 1130 | 254 Maximal: 1140 | 256 Max. Wind Velocity km/h mph 241 150 Height / Width / Depth mm inches 1999 / 508 / 175 78.7 / 20.0 / 6.9 Category of Mounting Hardware XH (X-Heavy) Weight kg lb 41.0 / 46.0 (clamps incl.) 90.4 / 101.4 (clamps incl.) Packing Size mm inches 2200 / 542 / 268 86.6 / 21.3 / 10.6 Scope of Supply Panel, FlexRET and clamps for 55–115 mm | 2.2–4.5 inches diameter 1) 22 | 0.9 2) 150 | 5.9 3) ’11 | 0.4 All dimensions in mm | inches 1784 | 70.2 2046 | 80.6 1999 | 78.7 For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit. Wall mounting: No additional mounting kit needed. Material: Refl ector screen: Aluminum. Fiberglass housing: It covers totally the internal antenna components. The special design reduces the sealing areas to a minimum and guarantees the best weather protection. Fiberglass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The color of the radome is light grey. All nuts and bolts: Stainless steel or hot-dip galvanized steel. Grounding: The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded. Site Sharing Adapter 3-way FlexRET BTS1 BTS2 BTS3 FlexRET FlexRET AISG Site Sharing Adapter 6-way FlexRET BTS3 BTS4 FlexRET FlexRET BTS2BTS1 BTS5 BTS6 AISG Configuration example with Site Sharing Adapter 86010154 Configuration example with Site Sharing Adapter 86010155 For more information please refer to the respective data sheets. Accessories (order separately if required) Type No. Description Remarks mm | inches Weight approx. kg | lb Units per antenna 85010097 2 clamps Mast diameter: 110 – 220 | 4.3 – 8.7 9.4 | 20.7 1 85010099 1 downtilt kit Downtilt angle: 0° – 14° 10.6 | 23.4 1 86010154 Site Sharing Adapter 3-way (see fi gure below) 0.7 | 1.5 86010155 Site Sharing Adapter 6-way (see fi gure below) 1.4 | 3.1

86010162 Gender Adapter Solely to be used in combination with

the FlexRET module 86010153V01 0.045 | 0.099 1 86010163 Port Extender 0.16 | 0.35 1 Accessories (included in the scope of supply) 85010096 2 clamps Mast diameter: 55 – 115 | 2.2 – 4.5 5.0 | 11.0 1 86010153V01 FlexRET 1 Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082 All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com

Frequency range Array Connector 698–960 MHz R1 1–2 698–960 MHz R2 3–4 R1 R2 Left Right Bottom view * Dimensions refer to radome All dimensions in mm | inches 126 | 5.0 508 | 20.0 * 226 | 8.9 93 | 3.7 * 240 | 9.4 * 175 | 6.9 * 698 - 960 698 - 960 698 - 960 698 - 960 Layout of interface: Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082 All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com Order Information Model Description 80010901 4-Port antenna with mounting bracket 80010901K 4-Port antenna with mounting bracket and mechanical tilt bracket

936.5063 Subject to alteration. Mounting Hardware Clamp (Wind Load Category “XH”) Clamp Type No. 85010096 Suitable for mast diameter mm inches 55 – 115 2.2 – 4.5 Scope of supply 1 x lower clamp 1 x upper clamp Material – Clamp – Screws – Nuts Hot-dip galvanized steel Hot-dip galvanized steel Stainless steel Weight kg lb 5.0 11.0 ABC D E F GH mm inches 200 7.9 2.7 3.5 55 – 115 2.2 – 4.5 150 5.9 130 5.1 (19) (0.7) (39) (1.5) Please note: Kathrein does not recommend to use counter nuts. GHE AB C F lower clamp upper clamp ’ D G lower clamp H upper clamp Attention! Square of the screw must be positioned in the square hole before tightening the nut. All nuts have the same wrench size 17. Torque MA = 40 Nm Torque MA = 40 Nm Torque MA = 40 Nm Torque MA = 40 Nm

85010096 Page 1 of 1

Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082 All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com

Type No. 86010153V01 Protocols compliant to 3GPP/AISG 2.0 Logical interface ex factory 3GPP/AISG 2.0 Operates as Single RETs or Multi RET Ex factory Single RETs Input voltage range V 10 ... 30 (pin 6) Power consumption W Typically < 1; < 10 (motor activated) Connectors 2 x 8 pin connector according to IEC 60130-9; according to AISG-C 485 Daisy chain in: male; Daisy chain out: female Hardware interfaces RS 485A/B (pin 5, pin 3); power supply (pin 6); DC return (pin 7); according to AISG / 3GPP Adjustment time (full range) sec 40 (typically, depending on antenna type) Adjustment cycles > 50,000 Temperature range °C –40 … +60 Protection class IP 24 (installed) Lightning protection AISG interface (each pin) 2.5 kA (10/350 μs) 8 kA (8/20 μs) according to IEC 61000-4-5 Housing material Profi le: Aluminum anodized; cover: Aluminum die cast coated Weight g lb 350 0.77 Packing size (H x W x D) mm inches 245 x 93 x 102 9.6 x 3.6 x 4 Dimensions (H x W x D) mm inches 142 x 71 x 51 5.6 x 2.8 x 2 Please note: If the Primary which controls the FlexRET system does not support the default ex-factory interface setting, then the FlexRET must be switched to the appropriate standard of the Primary before installation. Please contact Kathrein for further information. If the FlexRET of an antenna has to be replaced, the FlexRET gets the information stored in the antenna after power on automatically. It is not necessary to confi gure the FlexRET manually. Standards: EN 60950-1 (Safety) EN 60950-22 (Safety – Equipment installed outdoor) EN 55022 (Emission) EN 55024 (Immunity) ETS 300019-1-4 (Environmental) UL 60950-1; 1 st edition Certifi cation: CE, FCC Scope of supply: FlexRET Optional: Site Sharing Adapter (86010154 or 86010155) to create independent logical interfaces at one antenna or site. Makes it possible to operate with more than one independent Node B. Gender Adapter (86010162) to convert the AISG out (female) to an AISG in (male) port in order to operate one FlexRet with exactly 2 BTS. Detailed information is given in the data sheet of the Gender Adapter. Port Extender (86010163) to convert the existing AISG input and output in order to operate FlexRet with exactly 2 BTS while maintaining the daisy chain capability. Detailed information is given in the data sheet of the Port Extender. Please note: In general, the addressing of the FlexRET is automatically performed. Only in case the FlexRET is manually addressed, the serial number has to be extended by the corresponding colour coding extension (e.g. CSG351234-R1). The respective information can be found on the site documentation which is included in the scope of supply. 86010153V01 Page 1 of 4 936.5204 Subject to alteration. FlexRET A fl exible, integrated solution for adjusting the electrical downtilt of Kathrein FlexRET antennas.

• Compliant to 3GPP/AISG 2.0 • Daisy Chain feasibility
• Single RETs or Multi RET displayed • Pre-confi gured
• Two way antenna sharing feasibility Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082 All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com

936.5204 Subject to alteration. FlexRET Startup of FlexRET The FlexRET module included in the antenna is preconfi gured with the following information: Antenna model no., Antenna Serial no., Antenna confi guration data. After connecting a control cable and scanning the antenna line devices (ALD) the used primary (e.g. NodeB, ALC, etc.) will fi nd the FlexRET. You only need to insert your additional data. Connecting the control cables: Connect a control cable to the daisy chain input of the FlexRET. The tightening torque for fi xing the connector must be 0.5 – 1.0 Nm (‘hand-tightened’). The connector should be tightened by hand or by a special torque screw driver (order no. 85010080). See also data sheet for Kathrein AISG-cable (86010007, ...). Please note: To ensure the tightness of the RET System, Kathrein recommend the use of Kathrein components only. Please note: If the daisy chain output is not used, do not remove the protection cap. For daisy chain operation, remove the protection cap and attach a control cable to interconnect with the daisy chain input of the subsequent FlexRET or external RCU. Please note: Do not remove the protection cap on the daisy chain output of the last FlexRET or RCU device. Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082 All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com

936.5204 Subject to alteration. FCC – Statements /g6/g3/g3/g1/g39/g1/g13/g33/g16/g33/g20/g26/g20/g27/g33/g32/g1/g1 /g6/g3/g3/g1/g42/g1/g44/g47/g37/g44/g49/g1 /g18/g30/g31/g40/g1/g24/g25/g43/g31/g23/g25/g1/g23/g36/g34/g37/g33/g31/g25/g40/g1/g44/g31/g41/g30/g1/g15/g20/g39/g41/g1/g65/g69/g1/g36/g28/g1/g41/g30/g25/g1/g7/g4/g4/g1/g39/g42/g33/g25/g40/g52/g1/g14/g37/g25/g39/g20/g41/g31/g36/g35/g1/g31/g40/g1/g40/g42/g22/g32/g25/g23/g41/g1/g41/g36/g1/g41/g30/g25/g1/g28/g36/g33/g33/g36/g44/g31/g35/g29/g1/g41/g44/g36/g1 /g23/g36/g35/g24/g31/g41/g31/g36/g35/g40/g51/g1/g57/g65/g58/g1/g18/g30/g31/g40/g1/g24/g25/g43/g31/g23/g25/g1/g34/g20/g46/g1/g35/g36/g41/g1/g23/g20/g42/g40/g25/g1/g30/g20/g39/g34/g28/g42/g33/g1/g31/g35/g41/g25/g39/g28/g25/g39/g25/g35/g23/g25/g50/g1/g20/g35/g24/g1/g57/g66/g58/g1/g41/g30/g31/g40/g1/g24/g25/g43/g31/g23/g25/g1/g34/g42/g40/g41/g1/g20/g23/g23/g25/g37/g41/g1/g20/g35/g46/g1 /g31/g35/g41/g25/g39/g28/g25/g39/g25/g35/g23/g25/g1/g39/g25/g23/g25/g31/g43/g25/g24/g50/g1/g31/g35/g23/g33/g42/g24/g31/g35/g29/g1/g31/g35/g41/g25/g39/g28/g25/g39/g25/g35/g23/g25/g1/g41/g30/g20/g41/g1/g34/g20/g46/g1/g23/g20/g42/g40/g25/g1/g42/g35/g24/g25/g40/g31/g39/g25/g24/g1/g36/g37/g25/g39/g20/g41/g31/g36/g35/g52/g1 /g6/g3/g3/g1/g42/g1/g44/g47/g37/g44/g43/g47/g1 /g13/g36/g41/g25/g51/g1/g18/g30/g31/g40/g1/g25/g38/g42/g31/g37/g34/g25/g35/g41/g1/g30/g20/g40/g1/g22/g25/g25/g35/g1/g41/g25/g40/g41/g25/g24/g1/g20/g35/g24/g1/g28/g36/g42/g35/g24/g1/g41/g36/g1/g23/g36/g34/g37/g33/g46/g1/g44/g31/g41/g30/g1/g41/g30/g25/g1/g33/g31/g34/g31/g41/g40/g1/g28/g36/g39/g1/g20/g1/g4/g33/g20/g40/g40/g1/g3/g1/g24/g31/g29/g31/g41/g20/g33/g1/g24/g25/g43/g31/g23/g25/g50/g1 /g37/g42/g39/g40/g42/g20/g35/g41/g1/g41/g36/g1/g37/g20/g39/g41/g1/g65/g69/g1/g36/g28/g1/g41/g30/g25/g1/g7/g4/g4/g1/g16/g42/g33/g25/g40/g52/g1/g18/g30/g25/g40/g25/g1/g33/g31/g34/g31/g41/g40/g1/g20/g39/g25/g1/g24/g25/g40/g31/g29/g35/g25/g24/g1/g41/g36/g1/g37/g39/g36/g43/g31/g24/g25/g1/g39/g25/g20/g40/g36/g35/g20/g22/g33/g25/g1/g37/g39/g36/g41/g25/g23/g41/g31/g36/g35/g1 /g20/g29/g20/g31/g35/g40/g41/g1/g30/g20/g39/g34/g28/g42/g33/g1/g31/g35/g41/g25/g39/g28/g25/g39/g25/g35/g23/g25/g1/g31/g35/g1/g20/g1/g39/g25/g40/g31/g24/g25/g35/g41/g31/g20/g33/g1/g31/g35/g40/g41/g20/g33/g33/g20/g41/g31/g36/g35/g52/g1/g18/g30/g31/g40/g1/g25/g38/g42/g31/g37/g34/g25/g35/g41/g1/g29/g25/g35/g25/g39/g20/g41/g25/g40/g50/g1/g42/g40/g25/g40/g1/g20/g35/g24/g1/g23/g20/g35/g1 /g39/g20/g24/g31/g20/g41/g25/g1/g39/g20/g24/g31/g36/g1/g28/g39/g25/g38/g42/g25/g35/g23/g46/g1/g25/g35/g25/g39/g29/g46/g1/g20/g35/g24/g50/g1/g31/g28/g1/g35/g36/g41/g1/g31/g35/g40/g41/g20/g33/g33/g25/g24/g1/g20/g35/g24/g1/g42/g40/g25/g24/g1/g31/g35/g1/g20/g23/g23/g36/g39/g24/g20/g35/g23/g25/g1/g44/g31/g41/g30/g1/g41/g30/g25/g1/g31/g35/g40/g41/g39/g42/g23/g41/g31/g36/g35/g40/g50/g1/g34/g20/g46/g1 /g23/g20/g42/g40/g25/g1/g30/g20/g39/g34/g28/g42/g33/g1/g31/g35/g41/g25/g39/g28/g25/g39/g25/g35/g23/g25/g1/g41/g36/g1/g39/g20/g24/g31/g36/g1/g23/g36/g34/g34/g42/g35/g31/g23/g20/g41/g31/g36/g35/g40/g52/g1/g8/g36/g44/g25/g43/g25/g39/g50/g1/g41/g30/g25/g39/g25/g1/g31/g40/g1/g35/g36/g1/g29/g42/g20/g39/g20/g35/g41/g25/g25/g1/g41/g30/g20/g41/g1 /g31/g35/g41/g25/g39/g28/g25/g39/g25/g35/g23/g25/g1/g44/g31/g33/g33/g1/g35/g36/g41/g1/g36/g23/g23/g42/g39/g1/g31/g35/g1/g20/g1/g37/g20/g39/g41/g31/g23/g42/g33/g20/g39/g1/g31/g35/g40/g41/g20/g33/g33/g20/g41/g31/g36/g35/g52/g1/g9/g28/g1/g41/g30/g31/g40/g1/g25/g38/g42/g31/g37/g34/g25/g35/g41/g1/g24/g36/g25/g40/g1/g23/g20/g42/g40/g25/g1/g30/g20/g39/g34/g28/g42/g33/g1 /g31/g35/g41/g25/g39/g28/g25/g39/g25/g35/g23/g25/g1/g41/g36/g1/g39/g20/g24/g31/g36/g1/g36/g39/g1/g41/g25/g33/g25/g43/g31/g40/g31/g36/g35/g1/g39/g25/g23/g25/g37/g41/g31/g36/g35/g50/g1/g44/g30/g31/g23/g30/g1/g23/g20/g35/g1/g22/g25/g1/g24/g25/g41/g25/g39/g34/g31/g35/g25/g24/g1/g22/g46/g1/g41/g42/g39/g35/g31/g35/g29/g1/g41/g30/g25/g1/g25/g38/g42/g31/g37/g34/g25/g35/g41/g1/g36/g28/g28/g1 /g20/g35/g24/g1/g36/g35/g50/g1/g41/g30/g25/g1/g42/g40/g25/g39/g1/g31/g40/g1/g25/g35/g23/g36/g42/g39/g20/g29/g25/g24/g1/g41/g36/g1/g41/g39/g46/g1/g41/g36/g1/g23/g36/g39/g39/g25/g23/g41/g1/g41/g30/g25/g1/g31/g35/g41/g25/g39/g28/g25/g39/g25/g35/g23/g25/g1/g22/g46/g1/g36/g35/g25/g1/g36/g39/g1/g34/g36/g39/g25/g1/g36/g28/g1/g41/g30/g25/g1/g28/g36/g33/g33/g36/g44/g31/g35/g29/g1 /g34/g25/g20/g40/g42/g39/g25/g40/g51/g1 /g56/g16/g25/g36/g39/g31/g25/g35/g41/g1/g36/g39/g1/g39/g25/g33/g36/g23/g20/g41/g25/g1/g41/g30/g25/g1/g39/g25/g23/g25/g31/g43/g31/g35/g29/g1/g20/g35/g41/g25/g35/g35/g20/g52/g1 /g56/g9/g35/g23/g39/g25/g20/g40/g25/g1/g41/g30/g25/g1/g40/g25/g37/g20/g39/g20/g41/g31/g36/g35/g1/g22/g25/g41/g44/g25/g25/g35/g1/g41/g30/g25/g1/g25/g38/g42/g31/g37/g34/g25/g35/g41/g1/g20/g35/g24/g1/g39/g25/g23/g25/g31/g43/g25/g39/g52/g1 /g56/g4/g36/g35/g35/g25/g23/g41/g1/g41/g30/g25/g1/g25/g38/g42/g31/g37/g34/g25/g35/g41/g1/g31/g35/g41/g36/g1/g20/g35/g1/g36/g42/g41/g33/g25/g41/g1/g36/g35/g1/g20/g1/g23/g31/g39/g23/g42/g31/g41/g1/g24/g31/g28/g28/g25/g39/g25/g35/g41/g1/g28/g39/g36/g34/g1/g41/g30/g20/g41/g1/g41/g36/g1/g44/g30/g31/g23/g30/g1/g41/g30/g25/g1/g39/g25/g23/g25/g31/g43/g25/g39/g1/g31/g40/g1 /g23/g36/g35/g35/g25/g23/g41/g25/g24/g52/g1 /g56/g4/g36/g35/g40/g42/g33/g41/g1/g41/g30/g25/g1/g24/g25/g20/g33/g25/g39/g1/g36/g39/g1/g20/g35/g1/g25/g45/g37/g25/g39/g31/g25/g35/g23/g25/g24/g1/g39/g20/g24/g31/g36/g54/g18/g19/g1/g41/g25/g23/g30/g35/g31/g23/g31/g20/g35/g1/g28/g36/g39/g1/g30/g25/g33/g37/g52/g1 /g3/g16/g27/g16/g19/g16/g1/g3/g10/g12/g38/g7/g20/g27/g1/g13/g20/g18/g33/g24/g28/g27/g1/g48/g37/g44/g37/g46/g1 /g18/g30/g31/g40/g1/g24/g25/g43/g31/g23/g25/g1/g23/g36/g34/g37/g33/g31/g25/g40/g1/g44/g31/g41/g30/g1/g9/g35/g24/g42/g40/g41/g39/g46/g1/g4/g20/g35/g20/g24/g20/g1/g33/g31/g23/g25/g35/g23/g25/g55/g25/g45/g25/g34/g37/g41/g1/g16/g17/g17/g1/g40/g41/g20/g35/g24/g20/g39/g24/g57/g40/g58/g52/g1/g14/g37/g25/g39/g20/g41/g31/g36/g35/g1/g31/g40/g1/g40/g42/g22/g32/g25/g23/g41/g1/g41/g36/g1 /g41/g30/g25/g1/g28/g36/g33/g33/g36/g44/g31/g35/g29/g1/g41/g44/g36/g1/g23/g36/g35/g24/g31/g41/g31/g36/g35/g40/g51/g57/g65/g58/g1/g41/g30/g31/g40/g1/g24/g25/g43/g31/g23/g25/g1/g34/g20/g46/g1/g35/g36/g41/g1/g23/g20/g42/g40/g25/g1/g31/g35/g41/g25/g39/g28/g25/g39/g25/g35/g23/g25/g50/g1/g20/g35/g24/g1/g57/g66/g58/g1/g41/g30/g31/g40/g1/g24/g25/g43/g31/g23/g25/g1/g34/g42/g40/g41/g1 /g20/g23/g23/g25/g37/g41/g1/g20/g35/g46/g1/g31/g35/g41/g25/g39/g28/g25/g39/g25/g35/g23/g25/g50/g1/g31/g35/g23/g33/g42/g24/g31/g35/g29/g1/g31/g35/g41/g25/g39/g28/g25/g39/g25/g35/g23/g25/g1/g41/g30/g20/g41/g1/g34/g20/g46/g1/g23/g20/g42/g40/g25/g1/g42/g35/g24/g25/g40/g31/g39/g25/g24/g1/g36/g37/g25/g39/g20/g41/g31/g36/g35/g1/g36/g28/g1/g41/g30/g25/g1/g24/g25/g43/g31/g23/g25/g52/g1 /g11/g25/g1/g37/g39/g26/g40/g25/g35/g41/g1/g20/g37/g37/g20/g39/g25/g31/g33/g1/g25/g40/g41/g1/g23/g36/g35/g28/g36/g39/g34/g25/g1/g20/g42/g45/g1/g4/g13/g16/g1/g24/g61/g9/g35/g24/g42/g40/g41/g39/g31/g25/g1/g4/g20/g35/g20/g24/g20/g1/g20/g37/g37/g33/g31/g23/g20/g22/g33/g25/g40/g1/g20/g42/g45/g1/g20/g37/g37/g20/g39/g25/g31/g33/g40/g1/g39/g20/g24/g31/g36/g1 /g25/g45/g25/g34/g37/g41/g40/g1/g24/g25/g1/g33/g31/g23/g25/g35/g23/g25/g52/g1/g11/g61/g25/g45/g37/g33/g36/g31/g41/g20/g41/g31/g36/g35/g1/g25/g40/g41/g1/g20/g42/g41/g36/g39/g31/g40/g26/g25/g1/g20/g42/g45/g1/g24/g25/g42/g45/g1/g23/g36/g35/g24/g31/g41/g31/g36/g35/g40/g1/g40/g42/g31/g43/g20/g35/g41/g25/g40/g1/g51/g1/g57/g65/g58/g1/g33/g61/g20/g37/g37/g20/g39/g25/g31/g33/g1/g35/g25/g1 /g24/g36/g31/g41/g1/g37/g20/g40/g1/g37/g39/g36/g24/g42/g31/g39/g25/g1/g24/g25/g1/g22/g39/g36/g42/g31/g33/g33/g20/g29/g25/g50/g1/g25/g41/g1/g57/g66/g58/g1/g33/g61/g42/g41/g31/g33/g31/g40/g20/g41/g25/g42/g39/g1/g24/g25/g1/g33/g61/g20/g37/g37/g20/g39/g25/g31/g33/g1/g24/g36/g31/g41/g1/g20/g23/g23/g25/g37/g41/g25/g39/g1/g41/g36/g42/g41/g1/g22/g39/g36/g42/g31/g33/g33/g20/g29/g25/g1 /g39/g20/g24/g31/g36/g26/g33/g25/g23/g41/g39/g31/g38/g42/g25/g1/g40/g42/g22/g31/g50/g1/g34/g27/g34/g25/g1/g40/g31/g1/g33/g25/g1/g22/g39/g36/g42/g31/g33/g33/g20/g29/g25/g1/g25/g40/g41/g1/g40/g42/g40/g23/g25/g37/g41/g31/g22/g33/g25/g1/g24/g61/g25/g35/g1/g23/g36/g34/g37/g39/g36/g34/g25/g41/g41/g39/g25/g1/g33/g25/g1/g28/g36/g35/g23/g41/g31/g36/g35/g35/g25/g34/g25/g35/g41/g52/g1 /g8/g3/g5/g13/g38/g43/g43/g46/g1 /g18/g30/g31/g40/g1/g4/g33/g20/g40/g40/g1/g3/g1/g24/g31/g29/g31/g41/g20/g33/g1/g20/g37/g37/g20/g39/g20/g41/g42/g40/g1/g23/g36/g34/g37/g33/g31/g25/g40/g1/g44/g31/g41/g30/g1/g4/g20/g35/g20/g24/g31/g20/g35/g1/g9/g4/g6/g17/g55/g64/g64/g67/g52/g1 /g4/g25/g41/g1/g20/g37/g37/g20/g39/g25/g31/g33/g1/g35/g42/g34/g26/g39/g31/g38/g42/g25/g1/g24/g25/g1/g33/g20/g1/g23/g33/g20/g40/g40/g25/g1/g3/g1/g25/g40/g41/g1/g23/g36/g35/g28/g36/g39/g34/g25/g1/g21/g1/g33/g20/g1/g35/g36/g39/g34/g25/g1/g13/g12/g3/g55/g64/g64/g67/g1/g24/g42/g1/g4/g20/g35/g20/g24/g20/g52/g1 /g1 /g6/g3/g3/g1/g42/g1/g44/g47/g37/g45/g44/g1/g40/g15/g16/g31/g27/g24/g27/g22/g1/g13/g33/g16/g33/g20/g26/g20/g27/g33/g41/g1 /g59/g2/g35/g46/g60/g1/g23/g30/g20/g35/g29/g25/g40/g1/g36/g39/g1/g34/g36/g24/g31/g28/g31/g23/g20/g41/g31/g36/g35/g40/g1/g35/g36/g41/g1/g25/g45/g37/g39/g25/g40/g40/g33/g46/g1/g20/g37/g37/g39/g36/g43/g25/g24/g1/g22/g46/g1/g41/g30/g25/g1/g37/g20/g39/g41/g46/g1/g39/g25/g40/g37/g36/g35/g40/g31/g22/g33/g25/g1/g28/g36/g39/g1/g23/g36/g34/g37/g33/g31/g20/g35/g23/g25/g1/g23/g36/g42/g33/g24/g1 /g43/g36/g31/g24/g1/g41/g30/g25/g1/g42/g40/g25/g39/g53/g40/g1/g20/g42/g41/g30/g36/g39/g31/g41/g46/g1/g41/g36/g1/g36/g37/g25/g39/g20/g41/g25/g1/g41/g30/g25/g1/g25/g38/g42/g31/g37/g34/g25/g35/g41/g52/g1 Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082 All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com

936.5204 Subject to alteration. FCC – Statements Compliance Information Statement (Declaration of Conformity Procedure) Model Name: FlexRET FCC ID SP3-86010153 Responsible Party: Kathrein USA Address: Greenway Plaza II 2400 Lakeside Blvd. Suite 650 Richardson, Texas 75082 Telephone: (01+) 214.238.8800 Type of equipment: Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082 All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com