SN54HC365 TI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 14
Technical content
/C0083/C0078/C0053/C0052/C0072/C0067/C0051/C0054/C0053/C0044 /C0083/C0078/C0055/C0052/C0072/C0067/C0051/C0054/C0053 /C0072/C0069/C0088 /C0066/C0085/C0070/C0070/C0069/C0082/C0083 /C0065/C0078/C0068 /C0076/C0073/C0078/C0069 /C0068/C0082/C0073/C0086/C0069/C0082/C0083 /C0087/C0073/C0084/C0072 /C0051/C0262/C0083/C0084/C0065/C0084/C0069 /C0079/C0085/C0084/C0080/C0085/C0084/C0083 SCLS308D − JANUARY 1996 − REVISED OCTOBER 2003 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 /C0068Wide Operating Voltage Range of 2 V to 6 V /C0068High-Current 3-State Outputs Drive Bus Lines, Buffer-Memory Address Registers, or Drive Up To 15 LSTTL Loads /C0068True Outputs /C0068Low Power Consumption, 80-µA Max ICC /C0068Typical tpd = 10 ns /C0068±6-mA Output Drive at 5 V /C0068Low Input Current of 1 µA Max description/ordering information These hex buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The ’HC365 devices contain six independent buffers/drivers with dual-gated output-enable (OE1 and OE2) inputs. When OE1 and OE2 are both low, the devices pass noninverted data from the A inputs to the Y outputs. If either (or both) output-enable terminal(s) is high, the outputs are in the high-impedance state.
ORDERING INFORMATION
TA PACKAGE † ORDERABLE PART NUMBER TOP-SIDE MARKING PDIP − N Tube of 25 SN74HC365N SN74HC365N Tube of 40 SN74HC365D SOIC − D Reel of 2500 SN74HC365DR HC365 −40°C to 85°C SOIC − D Reel of 250 SN74HC365DT HC365 −40°C to 85°C SOP − NS Reel of 2000 SN74HC365NSR HC365 Reel of 90 SN74HC365PW TSSOP − PW Reel of 2000 SN74HC365PWR HC365TSSOP − PW Reel of 250 SN74HC365PWT HC365 CDIP − J Tube of 25 SNJ54HC365J SNJ54HC365J −55°C to 125°C CFP − W Tube of 150 SNJ54HC365W SNJ54HC365W−55 C to 125C LCCC − FK Tube of 55 SNJ54HC365FK SNJ54HC365FK † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. 321 2 0 1 9 91 01 11 21 3 NC NC OE1 NC V OE2 GND NC SN54HC365 . . . FK PACKAGE (TOP VIEW) CC NC − No internal connection OE1 GND VCC OE2 SN54HC365 ...J O R W PACKAGE SN74HC365 . . . D, N, NS, OR PW PACKAGE (TOP VIEW) Copyright 2003, Texas Instruments Incorporated Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. /C0080/C0082/C0079/C0068/C0085/C0067/C0084/C0073/C0079/C0078 /C0068/C0065/C0084/C0065 /C0105/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0105/C0115 /C0099/C0117/C0114/C0114/C0101/C0110/C0116 /C0097/C0115 /C0111/C0102 /C0112/C0117/C0098/C0108/C0105/C0099/C0097/C0116/C0105/C0111/C0110 /C0100/C0097/C0116/C0101/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0099/C0111/C0110/C0102/C0111/C0114/C0109 /C0116/C0111 /C0115/C0112/C0101/C0099/C0105/C0102/C0105/C0099/C0097/C0116/C0105/C0111/C0110/C0115 /C0112/C0101/C0114 /C0116/C0104/C0101 /C0116/C0101/C0114/C0109/C0115 /C0111/C0102 /C0084/C0101/C0120/C0097/C0115 /C0073/C0110/C0115/C0116/C0114/C0117/C0109/C0101/C0110/C0116/C0115 /C0115/C0116/C0097/C0110/C0100/C0097/C0114/C0100 /C0119/C0097/C0114/C0114/C0097/C0110/C0116/C0121/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0105/C0111/C0110 /C0112/C0114/C0111/C0099/C0101/C0115/C0115/C0105/C0110/C0103 /C0100/C0111/C0101/C0115 /C0110/C0111/C0116 /C0110/C0101/C0099/C0101/C0115/C0115/C0097/C0114/C0105/C0108/C0121 /C0105/C0110/C0099/C0108/C0117/C0100/C0101 /C0116/C0101/C0115/C0116/C0105/C0110/C0103 /C0111/C0102 /C0097/C0108/C0108 /C0112/C0097/C0114/C0097/C0109/C0101/C0116/C0101/C0114/C0115/C0046 /C0079/C0110 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0099/C0111/C0109/C0112/C0108/C0105/C0097/C0110/C0116 /C0116/C0111 /C0077/C0073/C0076/C0262/C0080/C0082/C0070/C0262/C0051/C0056/C0053/C0051/C0053/C0044 /C0097/C0108/C0108 /C0112/C0097/C0114/C0097/C0109/C0101/C0116/C0101/C0114/C0115 /C0097/C0114/C0101 /C0116/C0101/C0115/C0116/C0101/C0100 /C0117/C0110/C0108/C0101/C0115/C0115 /C0111/C0116/C0104/C0101/C0114/C0119/C0105/C0115/C0101 /C0110/C0111/C0116/C0101/C0100/C0046 /C0079/C0110 /C0097/C0108/C0108 /C0111/C0116/C0104/C0101/C0114 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115/C0044 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0105/C0111/C0110 /C0112/C0114/C0111/C0099/C0101/C0115/C0115/C0105/C0110/C0103 /C0100/C0111/C0101/C0115 /C0110/C0111/C0116 /C0110/C0101/C0099/C0101/C0115/C0115/C0097/C0114/C0105/C0108/C0121 /C0105/C0110/C0099/C0108/C0117/C0100/C0101 /C0116/C0101/C0115/C0116/C0105/C0110/C0103 /C0111/C0102 /C0097/C0108/C0108 /C0112/C0097/C0114/C0097/C0109/C0101/C0116/C0101/C0114/C0115/C0046
/C0083/C0078/C0053/C0052/C0072/C0067/C0051/C0054/C0053/C0044 /C0083/C0078/C0055/C0052/C0072/C0067/C0051/C0054/C0053 /C0072/C0069/C0088 /C0066/C0085/C0070/C0070/C0069/C0082/C0083 /C0065/C0078/C0068 /C0076/C0073/C0078/C0069 /C0068/C0082/C0073/C0086/C0069/C0082/C0083 /C0087/C0073/C0084/C0072 /C0051/C0262/C0083/C0084/C0065/C0084/C0069 /C0079/C0085/C0084/C0080/C0085/C0084/C0083 SCLS308D − JANUARY 1996 − REVISED OCTOBER 2003
2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
(each buffer/driver) INPUTS OUTPUT OE1 OE2 A OUTPUT Y H X X Z X HX Z L LH H L L L L logic diagram (positive logic) OE1 OE2 To Five Other Channels A1 Y1 Pin numbers shown are for the D, J, N, NS, PW, and W packages. absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7.
/C0083/C0078/C0053/C0052/C0072/C0067/C0051/C0054/C0053/C0044 /C0083/C0078/C0055/C0052/C0072/C0067/C0051/C0054/C0053 /C0072/C0069/C0088 /C0066/C0085/C0070/C0070/C0069/C0082/C0083 /C0065/C0078/C0068 /C0076/C0073/C0078/C0069 /C0068/C0082/C0073/C0086/C0069/C0082/C0083 /C0087/C0073/C0084/C0072 /C0051/C0262/C0083/C0084/C0065/C0084/C0069 /C0079/C0085/C0084/C0080/C0085/C0084/C0083 SCLS308D − JANUARY 1996 − REVISED OCTOBER 2003 3POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 recommended operating conditions (see Note 3) SN54HC365 SN74HC365 UNITMIN NOM MAX MIN NOM MAX UNIT VCC Supply voltage 2 5 6 2 5 6 V VCC = 2 V 1.5 1.5 VIH High-level input voltage VCC = 4.5 V 3.15 3.15 VVIH High-level input voltage VCC = 6 V 4.2 4.2 V VCC = 2 V 0.5 0.5 VIL Low-level input voltage VCC = 4.5 V 1.35 1.35 VVIL Low-level input voltage VCC = 6 V 1.8 1.8 V VI Input voltage 0 VCC 0 VCC V VO Output voltage 0 VCC 0 VCC V VCC = 2 V 1000 1000 ∆t/∆v Input transition rise/fall time VCC = 4.5 V 500 500 ns∆t/∆v Input transition rise/fall time VCC = 6 V 400 400 ns TA Operating free-air temperature −55 125 −40 85 °C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC TA = 25°C SN54HC365 SN74HC365 UNITPARAMETER TEST CONDITIONS VCC MIN TYP MAX MIN MAX MIN MAX UNIT 2 V 1.9 1.998 1.9 1.9 VOH VI = VIH or VIL IOH = −20 µA 6 V 5.9 5.999 5.9 5.9 VVOH VI = VIH or VIL V 2 V 0.002 0.1 0.1 0.1 VOL VI = VIH or VIL IOL = 20 µA 6 V 0.001 0.1 0.1 0.1 VVOL VI = VIH or VIL V II VI = VCC or 0 6 V ±0.1 ±100 ±1000 ±1000 nA IOZ VO = VCC or 0 6 V ±0.01 ±0.5 ±10 ±5 µA ICC VI = VCC or 0, IO = 0 6 V 8 160 80 µA C i 2 V to 6 V 3 10 10 10 pF
/C0083/C0078/C0053/C0052/C0072/C0067/C0051/C0054/C0053/C0044 /C0083/C0078/C0055/C0052/C0072/C0067/C0051/C0054/C0053 /C0072/C0069/C0088 /C0066/C0085/C0070/C0070/C0069/C0082/C0083 /C0065/C0078/C0068 /C0076/C0073/C0078/C0069 /C0068/C0082/C0073/C0086/C0069/C0082/C0083 /C0087/C0073/C0084/C0072 /C0051/C0262/C0083/C0084/C0065/C0084/C0069 /C0079/C0085/C0084/C0080/C0085/C0084/C0083 SCLS308D − JANUARY 1996 − REVISED OCTOBER 2003
4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
switching characteristics over recommended operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 1) PARAMETER FROM TO VCC TA = 25°C SN54HC365 SN74HC365 UNITPARAMETER FROM (INPUT) TO (OUTPUT) VCC MIN TYP MAX MIN MAX MIN MAX UNIT
2 V 50 95 145 120
tpd A Y 4.5 V 12 19 29 24 nstpd A Y
6 V 10 16 25 20
2 V 100 190 285 238
ten OE Y 4.5 V 26 38 57 48 nsten OE Y
6 V 21 32 48 41
2 V 50 175 265 240
tdis OE Y 4.5 V 21 35 53 48 nstdis OE Y
6 V 19 30 45 41
2 V 28 60 90 75
tt Any 4.5 V 8 12 18 15 nstt Any
6 V 6 10 15 13
switching characteristics over recommended operating free-air temperature range, CL = 150 pF (unless otherwise noted) (see Figure 1) PARAMETER FROM TO VCC TA = 25°C SN54HC365 SN74HC365 UNITPARAMETER FROM (INPUT) TO (OUTPUT) VCC MIN TYP MAX MIN MAX MIN MAX UNIT
2 V 70 120 180 150
tpd A Y 4.5 V 17 24 36 30 nstpd A Y
6 V 14 20 31 25
2 V 140 230 345 285
ten OE Y 4.5 V 30 46 69 57 nsten OE Y
6 V 28 39 59 48
2 V 45 210 315 265
tt Any 4.5 V 17 42 63 53 nstt Any
6 V 13 36 53 45
operating characteristics, TA = 25°C PARAMETER TEST CONDITIONS TYP UNIT C pd Power dissipation capacitance per buffer/driver No load 35 pF
NOTES: A. C L includes probe and test-fixture capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr = 6 ns, tf = 6 ns. D. The outputs are measured one at a time with one input transition per measurement. E. tPLH and tPHL are the same as tpd. F. tPLZ and tPHZ are the same as tdis. G. tPZL and tPZH are the same as ten. Figure 1. Load Circuit and Voltage Waveforms
Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) 85001012A ACTIVE LCCC FK 20 1 TBD Call TI Level-NC-NC-NC 8500101EA ACTIVE CDIP J 16 1 TBD Call TI Level-NC-NC-NC JM38510/65706BEA ACTIVE CDIP J 16 1 TBD Call TI Level-NC-NC-NC SN54HC365J ACTIVE CDIP J 16 1 TBD Call TI Level-NC-NC-NC SN74HC365D ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC365DE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC365DR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC365DRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC365DT ACTIVE SOIC D 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC365DTE4 ACTIVE SOIC D 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC365N ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC SN74HC365NSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC365NSRE4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC365PW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC365PWE4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC365PWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC365PWRE4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC365PWT ACTIVE TSSOP PW 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC365PWTE4 ACTIVE TSSOP PW 16 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SNJ54HC365FK ACTIVE LCCC FK 20 1 TBD Call TI Level-NC-NC-NC SNJ54HC365J ACTIVE CDIP J 16 1 TBD Call TI Level-NC-NC-NC (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. PACKAGE OPTION ADDENDUM www.ti.com 26-Sep-2005 Addendum-Page 1
Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 26-Sep-2005 Addendum-Page 2
MLCC006B – OCTOBER 1996 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER 4040140/D 10/96
28 TERMINAL SHOWN
B 0.358 (9,09) MAX (11,63) 0.560 (14,22) 0.560 0.458 0.858 (21,8) 1.063 (27,0) (14,22) ANO. OF MINMAX 0.358 0.660 0.761 0.458 0.342 (8,69) MIN (11,23) (16,26) 0.640 0.739 0.442 (9,09) (11,63) (16,76) 0.962 1.165 (23,83) 0.938 (28,99) 1.141 (24,43) (29,59) (19,32)(18,78) 0.020 (0,51) TERMINALS 0.080 (2,03) 0.064 (1,63) (7,80) 0.307 (10,31) 0.406 (12,58) 0.495 (12,58) 0.495 (21,6) 0.850 (26,6) 1.047 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.035 (0,89) 0.010 (0,25) 121314151618 17 432 0.020 (0,51) 0.010 (0,25) 12826 27 B SQ A SQ 0.055 (1,40) 0.045 (1,14) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. This package can be hermetically sealed with a metal lid. D. The terminals are gold plated. E. Falls within JEDEC MS-004
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,65 M0,10 0,10 0,25 0,50 0,75 0,15 NOM Gage Plane 9,80 9,60 7,90 7,70 2016 6,60 6,40 4040064/F 01/97 0,30 6,60 6,20 0,19 4,30 4,50 0,15 A 1,20 MAX 5,10 4,90 3,10 2,90 A MAX A MIN DIM PINS ** 0,05 4,90 5,10 Seating Plane 0°–8° NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-153
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated