LM136-5.0QML TI1 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
LM136-5.0QML,LM136A-5.0QML LM136A-5.0QML LM136-5.0QML 5.0V Reference Diode Literature Number: SNVS352A
LM136A-5.0QML LM136-5.0QML October 27, 2010 5.0V Reference Diode General Description The LM136A-5.0QML/LM136-5.0QML integrated circuits are precision 5.0V shunt regulator diodes. These monolithic IC voltage references operate as a low temperature coefficient 5.0V zener with 0.6Ω dynamic impedance. A third terminal on the LM136-5.0 allows the reference voltage and temperature coefficient to be trimmed easily. The LM136-5.0 series is useful as a precision 5.0V low volt- age reference for digital voltmeters, power supplies or op amp circuitry. The 5.0V makes it convenient to obtain a stable ref- erence from low voltage supplies. Further, since the LM136-5.0 operates as a shunt regulator, it can be used as either a positive or negative voltage reference.
Features
■ Adjustable 4V to 6V ■ Low temperature coefficient ■ Wide operating current of 600 μA to 10 mA ■ 0.6Ω dynamic impedance ■ Guaranteed temperature stability ■ Easily trimmed for minimum temperature drift ■ Fast turn-on ■ Three lead transistor package
Ordering Information
NS Part Number SMD Part Number NS Package Number Package Description LM136H-5.0/883 H03H T0-46, 3LD Metal Can LM136AH-5.0/883 H03H T0-46, 3LD Metal Can LM136AH-5.0-SMD 8418002XA H03H T0-46, 3LD Metal Can Connection Diagram TO-46 Metal Can Package 20139805 Bottom View See NS Package Number H03H © 2010 National Semiconductor Corporation 201398 www.national.com LM136A-5.0QML/LM136-5.0QML 5.0V Reference Diode
www.national.com 2 LM136A-5.0QML/LM136-5.0QML
5.0V Reference 20139801 5.0V Reference with Minimum Temperature Coefficient 20139815 † Adjust to 5.00V * Any silicon signal diode Trimmed 4V to 6V Reference with Temperature Coefficient Independent of Breakdown Voltage 20139803 * Does not affect temperature coefficient 3 www.national.com LM136A-5.0QML/LM136-5.0QML
Absolute Maximum Ratings (Note 1) Reverse Current 15mA Forward Current 15mA Storage Temperature −60°C ≤ TA ≤ +150°C Operating Temperature Range ( Note 2) −55°C ≤ TA ≤ +125°C Soldering Information (10 Seconds) 300°C Maximum Junction Temperature (TJmax) 150°C Thermal Resistance θJA Still Air Flow 354°C/W 500LF/Min Air Flow 77°C/W θJC 46°C/W ESD Rating ( Note 3) 1,000 V Quality Conformance Inspection Mil-Std-883, Method 5005 - Group A Subgroup Description Temp°C
1 Static tests at +25
2 Static tests at +125
3 Static tests at -55
4 Dynamic tests at +25
5 Dynamic tests at +125
6 Dynamic tests at -55
7 Functional tests at +25
8A Functional tests at +125 8B Functional tests at -55
9 Switching tests at +25
10 Switching tests at +125
11 Switching tests at -55
12 Settling time at +25
13 Settling time at +125
14 Settling time at -55
www.national.com 4 LM136A-5.0QML/LM136-5.0QML
LM136-5.0 Electrical Characteristics DC Parameters The following conditions apply, unless otherwise specified. IR = 1 mA Symbol Parameter Conditions Notes Min Max Unit Sub- groups VR Reverse Breakdown Voltage VAdj = 2.5V 4.6 5.4 V 1 4.8 5.6 V 2, 3 VAdj = 1.5V 5.4 6.6 V 1 5.6 6.8 V 2, 3 VAdj = 3.5V 2.4 4.6 V 1 2.8 4.8 V 2, 3 VAdj = Open 4.878 5.081 V 1 4.83 5.13 V 2, 3 IAdj Adjust Current VAdj = 2.5V -260 260 µA 1 VAdj = 1.5V -260 260 µA 1 VAdj = 3.5V -260 260 µA 1 ΔVR Reverse Breakdown Change with Current 0.6mA ≤ IR ≤ 15 mA -12 12 mV 1 -20 20 mV 2, 3 VF Foward Voltage IR = -10mA -1.5 -0.49 V 1 VStab Temperature Stability VR = Adjusted to 5V 36 mV 2, 3 ZRD Reverse Dynamic Impedance (Note 4) 1.6 Ω 1, 2, 3 LM136A–5.0 Electrical Characteristics DC Parameters The following conditions apply, unless otherwise specified. IR = 1 mA Symbol Parameter Conditions Notes Min Max Unit Sub- groups VR Reverse Breakdown Voltage VAdj = 2.5V 4.6 5.4 V 1 4.8 5.6 V 2, 3 VAdj = 1.5V 5.4 6.6 V 1 5.6 6.8 V 2, 3 VAdj = 3.5V 2.4 4.6 V 1 2.8 4.8 V 2, 3 VAdj = Open 4.935 5.029 V 1 4.88 5.08 V 2, 3 IAdj Adjust Current VAdj = 2.5V -260 260 µA 1 VAdj = 1.5V -260 260 µA 1 VAdj = 3.5V -260 260 µA 1 ΔVR Reverse Breakdown Change with Current 0.6mA ≤ IR ≤ 15 mA -12 12 mV 1 -20 20 mV 2, 3 VF Foward Voltage IR = -10mA -1.5 -0.49 V 1 VStab Temperature Stability VR = Adjusted to 5V 36 mV 2, 3 ZRD Reverse Dynamic Impedance (Note 4) 1.6 Ω 1, 2, 3 5 www.national.com LM136A-5.0QML/LM136-5.0QML
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. Note 2: The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature), θJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is PDmax = (TJmax - TA)/ θJA or the number given in the Absolute Maximum Ratings, whichever is lower. Note 3: Human body model, 100pF discharged through 1.5KΩ Note 4: Guaranteed, not tested. Typical Performance Characteristics Reverse Voltage Change 20139817 Zener Noise Voltage 20139818 Dynamic Impedance 20139819 Response Time 20139820 Reverse Characteristics 20139821 Temperature Drift 20139822 www.national.com 6 LM136A-5.0QML/LM136-5.0QML
Precision Power Regulator with Low Temperature Coefficient 20139811 * Adjust for 6.25V across R1 5V Crowbar 20139812 Adjustable Shunt Regulator 20139813 www.national.com 8 LM136A-5.0QML/LM136-5.0QML
Op Amp with Output Clamped 20139824 Bipolar Output Reference 20139825 9 www.national.com LM136A-5.0QML/LM136-5.0QML
5.0V Square Wave Calibrator 20139826 10V Buffered Reference 20139827 Low Noise Buffered Reference 20139828 Wide Input Range Reference 20139829 www.national.com 10 LM136A-5.0QML/LM136-5.0QML
Revision History
Date Released Revision Section Changes 04/10/08 A New Release, Corporate format. 2 MDS datasheets were converted into one Corporate datasheet format. MNLM136A-5.0-X Rev 0B0 & LM136-5.0-X Rev 0A0 MDS Data Sheets will be archived. 10/26/2010 B Data Sheet Title Changed Title from LM136A-5.0/LM136–5.0QML to LM136A-5.0QML/LM136–5.0QML. Revision A will be Archived. 11 www.national.com LM136A-5.0QML/LM136-5.0QML
Physical Dimensions inches (millimeters) unless otherwise noted TO-46 Metal Can Package (H) www.national.com 12 LM136A-5.0QML/LM136-5.0QML
13 www.national.com LM136A-5.0QML/LM136-5.0QML
LM136A-5.0QML/LM136-5.0QML 5.0V Reference Diode For more National Semiconductor product information and proven design tools, visit the following Web sites at: www.national.com Products Design Support Amplifiers www.national.com/amplifiers WEBENCH® Tools www.national.com/webench Audio www.national.com/audio App Notes www.national.com/appnotes Clock and Timing www.national.com/timing Reference Designs www.national.com/refdesigns Data Converters www.national.com/adc Samples www.national.com/samples Interface www.national.com/interface Eval Boards www.national.com/evalboards LVDS www.national.com/lvds Packaging www.national.com/packaging Power Management www.national.com/power Green Compliance www.national.com/quality/green Switching Regulators www.national.com/switchers Distributors www.national.com/contacts LDOs www.national.com/ldo Quality and Reliability www.national.com/quality LED Lighting www.national.com/led Feedback/Support www.national.com/feedback Voltage References www.national.com/vref Design Made Easy www.national.com/easy PowerWise® Solutions www.national.com/powerwise Applications & Markets www.national.com/solutions Serial Digital Interface (SDI) www.national.com/sdi Mil/Aero www.national.com/milaero Temperature Sensors www.national.com/tempsensors SolarMagic™ www.national.com/solarmagic PLL/VCO www.national.com/wireless PowerWise® Design University www.national.com/training THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION (“NATIONAL”) PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS, IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT NATIONAL’S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS. EXCEPT AS PROVIDED IN NATIONAL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other brand or product names may be trademarks or registered trademarks of their respective holders. Copyright© 2010 National Semiconductor Corporation For the most current product information visit us at www.national.com National Semiconductor Americas Technical Support Center Email: support@nsc.com Tel: 1-800-272-9959 National Semiconductor Europe Technical Support Center Email: europe.support@nsc.com National Semiconductor Asia Pacific Technical Support Center Email: ap.support@nsc.com National Semiconductor Japan Technical Support Center Email: jpn.feedback@nsc.com www.national.com
Texas InstrumentsIncorporatedand itssubsidiaries(TI)reservetherighttomake corrections,modifications,enhancements,improvements, and otherchanges toitsproductsand servicesatany timeand todiscontinueany productorservicewithoutnotice.Customersshould obtainthelatestrelevantinformationbeforeplacingordersand shouldverifythatsuch informationiscurrentand complete.Allproductsare soldsubjecttoTI’s termsand conditionsofsalesuppliedatthetimeoforderacknowledgment. TIwarrantsperformanceofitshardwareproductstothespecificationsapplicableatthetimeofsaleinaccordancewithTI’s standard warranty.Testingand otherqualitycontroltechniquesareused totheextentTIdeems necessarytosupportthiswarranty.Exceptwhere mandated by governmentrequirements,testingofallparametersofeach productisnotnecessarilyperformed. TIassumes no liabilityforapplicationsassistanceorcustomerproductdesign.Customersareresponsiblefortheirproductsand applicationsusingTIcomponents.To minimizetherisksassociatedwithcustomerproductsand applications,customersshouldprovide adequatedesignand operatingsafeguards. TIdoes notwarrantorrepresentthatany license,eitherexpressorimplied,isgrantedunderany TIpatentright,copyright,mask work right, orotherTIintellectualpropertyrightrelatingtoany combination,machine,orprocessinwhichTIproductsorservicesareused.Information publishedby TIregardingthird-partyproductsorservicesdoes notconstitutea licensefromTItouse such productsorservicesora warrantyorendorsementthereof.Use ofsuch informationmay requirea licensefroma thirdpartyunderthepatentsorotherintellectual propertyofthethirdparty,ora licensefromTIunderthepatentsorotherintellectualpropertyofTI. ReproductionofTIinformationinTIdatabooks ordatasheetsispermissibleonlyifreproductioniswithoutalterationand isaccompanied by allassociatedwarranties,conditions,limitations,and notices.Reproductionofthisinformationwithalterationisan unfairand deceptive businesspractice.TIisnotresponsibleorliableforsuch altereddocumentation.Informationofthirdpartiesmay be subjecttoadditional restrictions. ResaleofTIproductsorserviceswithstatementsdifferentfromorbeyond theparametersstatedby TIforthatproductorservicevoidsall expressand any impliedwarrantiesfortheassociatedTIproductorserviceand isan unfairand deceptivebusinesspractice.TIisnot responsibleorliableforany such statements. TIproductsarenotauthorizedforuse insafety-criticalapplications(suchas lifesupport)where a failureoftheTIproductwouldreasonably be expectedtocause severepersonalinjuryordeath,unlessofficersofthepartieshave executedan agreementspecificallygoverning such use.Buyersrepresentthattheyhave allnecessaryexpertiseinthesafetyand regulatoryramificationsoftheirapplications,and acknowledgeand agreethattheyaresolelyresponsibleforalllegal,regulatoryand safety-relatedrequirementsconcerningtheirproducts and any use ofTIproductsinsuch safety-criticalapplications,notwithstandingany applications-relatedinformationorsupportthatmay be providedby TI.Further,Buyersmust fullyindemnifyTIand itsrepresentativesagainstany damages arisingoutoftheuse ofTIproductsin such safety-criticalapplications. TIproductsareneitherdesignednorintendedforuse inmilitary/aerospaceapplicationsorenvironmentsunlesstheTIproductsare specificallydesignatedby TIas military-gradeor"enhanced plastic." Onlyproductsdesignatedby TIas military-grademeet military specifications.Buyersacknowledgeand agreethatany such use ofTIproductswhichTIhas notdesignatedas military-gradeissolelyat theBuyer's risk,and thattheyaresolelyresponsibleforcompliancewithalllegaland regulatoryrequirementsinconnectionwithsuch use. TIproductsareneitherdesignednorintendedforuse inautomotiveapplicationsorenvironmentsunlessthespecificTIproductsare designatedby TIas compliantwithISO/TS 16949 requirements.Buyersacknowledgeand agreethat,iftheyuse any non-designated productsinautomotiveapplications,TIwillnotbe responsibleforany failuretomeet such requirements. FollowingareURLs where you can obtaininformationon otherTexas Instrumentsproductsand applicationsolutions: Products Applications Audio www.ti.com/audio Communicationsand Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP ® Products www.dlp.com Energyand Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocksand Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space,Avionicsand Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportationand Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Videoand Imaging www.ti.com/video RFID www.ti-rfid.com OMAP MobileProcessors www.ti.com/omap WirelessConnectivity www.ti.com/wirelessconnectivity TIE2E Community Home Page e2e.ti.com MailingAddress:Texas Instruments,PostOfficeBox 655303,Dallas,Texas 75265 Copyright© 2011,Texas InstrumentsIncorporated