84140000

84140000 CRYDOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Operating Voltage Control Voltage AVAILABLE OPTIONS 1/4” Quick Connect 280 VAC 1/4” Quick Connect 660 VAC Locking Connector 280 VAC Rated Load Current Series 84140 0 1 U0 0: 25 Amp/Zero Voltage Turn-On 1: 25 Amp/Instantaneous Turn-On 2: 40 Amp/Zero Voltage Turn-On 3: 40 Amp/Instantaneous Turn-On 0: 24-280 VAC/Zero Voltage Turn-On 1: 24-280 VAC/Instantaneous Turn-On 0: 48-660 VAC/Zero Voltage Turn-On 1: 48-660 VAC/Instantaneous Turn-On 0: 4-15 VDC 1: 17-32 VDC 0: 4-15 VDC 1: 17-32 VDC 0: 4-15 VDC 1: 17-32 VDC 8: 25 Amp 9: 40 Amp 5: 25 Amp 6: 40 Amp 0: 24-280 VAC Dual GN Series

• Current rating 25 and 40 Amps
• Output voltage 24-280 VAC and 48-660 VAC
• Direct bond copper substrate
• Back to back dual SCR output
• 4000 VAC optical isolation
• Zero Voltage and Instantaneous Turn-On
• UL/cUL Recognized, CE Compliant OUTPUT SPECIFICATIONS (1) Description 280 VAC Operating Voltage [Vrms] 24-280 OUTPUT SPECIFICATIONS (1)

Description

Transient Voltage(t=1 min.) [Vpk] 550 Maximum Off-State Leakage Current @ Rated Voltage (@ max. line voltage) [mArms] 0.1

660 VAC

0.25 Maximum Load Current [Arms] Minimum Load Current [mArms]

1 Second surge current (50/60 Hz @ Ta=25°C) [Apk]

Maximum 1 Cycle Surge Current (50/60Hz) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Thermal Resistance Junction to Case (Rjc) [°C/W] Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] Maximum Off-State dv/dt @ Maximum Rated Voltage [V//uni03BCsec] 25 A 100 1.4 0.6 500 40 A 100 150 1.3 0.4 500 DatasheetPanel Mount Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. PRODUCT SELECTION 1/4” Quick Connect 280 VAC Locking Connector 280 VAC1/4” Quick Connect 660 VAC Control Voltage 25 A 40 A 40 A 4-15 VDC 84140500 8414060084140200 17-32 VDC 84140510 8414061084134210 25 A 84140800 84140810 40 A 84140900 84140910 25 A 84140000 84140410

Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. INPUT SPECIFICATIONS (1) Description 84140x0x Control Voltage Range [Vdc] 4-15 Minimum Turn-On Voltage [Vdc] 4 Must Turn-Off Voltage [Vdc] 1 Minimum Input Current (for on-state) [mA] 7.5 Maximum Input Current [mA] 34 Nominal Input Impedance [Ohms] 500 1/2 Cycle 1/2 Cycle Maximum Turn-On Time [msec] (2) Maximum Turn-Off Time [msec] 84140x1x 17-32 1500 GENERAL SPECIFICATIONS (1) ParametersDescription -40 to 80 °C -40 to 100 °C Input to Output Isolation Input to Output Capacitance Operation Frequency Input/Output to Ground Isolation

4000 Vrms

Ambient Operating Temperature Range

2500 Vrms

Ambient Storage Temperature Range 8pF 47 to 63 Hz Housing Material UL94 V-0 (self extinguishing) Weight (typical) 3.2 oz (91.5g) GENERAL NOTES For additional information or specific questions, contact Crydom Technical Support. (1) All parameters at 25°C unless otherwise specified. (2) Turn-on time for Instantaneous turn-on versions is 0.02 msec. Input A Input B 1A ( ) 2A ( ) 2B ( )Load V AC Load V AC 1B ( ) WIRING DIAGRAM S OLI D S T A T E R ELA Y

MECHANICAL SPECIFICATIONS (1) Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Input A Input B+ S OLI D S T A T E R ELA Y 0.88 [22.3] 2.25 [57.3] 0.47 [11.9] 0.30 [7.62] 0.10 [2.54] 1.88 [47.6] 1.25 [31.7] 0.17 [4.31] 0.37 [9.39] 1.31 [33.2] Mating Connector AMP #640441-4 Mating Connector for 841408xxx and 841409xxx Molex # 50-57-9404 without pins Crimp Pins Molex # 16-02-0103 DatasheetPanel Mount Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. EQUIVALENT CIRCUIT BLOCK DIAGRAMS +DC -DC AC Trigger Circuit Current Limiter AC INPUT OUTPUT +DC -DC AC Trigger Circuit Current Limiter AC INPUT OUTPUT

THERMAL DERATE INFORMATION AGENCY APPROVALS Certified according to EN 62314:2006 IEC 61000-4-2 Electrostatic Discharge Level 3 IEC 61000-4-4 Electrically Fast Transients Level 3 LR 38595 E79183 Rev. 092616 DatasheetPanel Mount Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. 25 A 20 30 40 50 60 70 80 0.7°C/W 1°C/W 1.5°C/W 2°C/W Combined Channel Output Current (Amp) Ambient Temperature (ºC) 40 A 20 30 40 50 60 70 80 0.5°C/W 1°C/W 1.5°C/W 2°C/W Combined Channel Output Current (Amp) Ambient Temperature (ºC)

DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH.

• Disconnect all power before installing or working with this equipment.
• Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION.
• Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
• Verificar todas las conexiones y colocar todas las tapas antes de energizer el equipo. El incumplimiento de estas instrucciones puede provocar la muerte o lesiones serias. RISQUE DE DESCHARGE ELECTRIQUE OU EXPLOSION
• Eteindre toutes les sources d'énergie de cet appareil avant de travailler dessus de cet appareil
• Vérifier tous connections, et remettre tous couverts en olace avant de mettre sous De non-suivi de ces instructions provoquera la mort ou des lésions sérieuses sérieuses. GEFAHR EINES ELEKTRISCHE N SCHLAGES ODER EINER EXPLOSION.
• Stellen Sie jeglichen Strom ab, der dieses Gerät versorgt, bevor Sie an dem Gerät Arbeiten durchführen
• Vor dem Drehen auf Energie alle Anschlüsse überprüfen und alle Abdeckungen ersetzen. Unterlassung dieser Anweisungen können zum Tode oder zu schweren Verletzungen führen. RISCHIO DI SCOSSA ELETTRICA O DELL’ESPLOSI ONE.
• Spenga tutta l'alimentazion e che fornisce questa apparecchiatu ra prima del lavorare a questa apparecchiatu ra
• Verificare tutti i collegamenti e sostituire tutte le coperture prima della rotazione sull'alimentazi one L'omissione di seguire queste istruz ioni provocherà la morte o di lesioni serie 存在电击、 爆炸或电弧 闪烁危险
• 在操作此设 备之前请先 关闭电源。 若不遵守这些说明， 可能会导致严重的 人身伤害甚至死亡。 WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE
• The product's side panels may be hot, allow the product to cool before touching.
• Follow proper mounting instructions including torque values.
• Do not allow liquids or foreign objects to enter this product. Failure to follow these instructions can result in serious injury, or equipment damage. RISQUE DE DOMMAGE MATERIEL ET DE SURCHAUFFE DU BOITIER
• Les panneaux latéraux du produit peuvent être chauds. Laisser le produit refroidir avant de le toucher.
• Respecter les consignes de montage, et notamment les couples de serrage.
• Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, des lésions corporelles graves ou des dommages matériels. Die Nichtbeachtung dieser Anweisung kann Körperverletzung oder Materialschäden zur Folge haben. GEFAHR VON MATERIALSCHÄDEN UND GEHÄUSEERHITZUNG
• Die Seitenwände können heiß sein. Lassen Sie das Produkt abkühlen, bevor Sie es berühren.
• Beachten Sie die Montageanweisungen,
• Führen Sie keine Flüssigkeiten oder Fremdkörper in das Produkt ein. Si no se respetan estas precauciones pueden producirse graves lesiones, daños materiales. RIESGO DE DAÑOS MATERIALES Y DE SOBRECALENTAMIENTO DE LA UNIDAD
• Los paneles laterales del producto pueden estar calientes. Esperar que el producto se enfríe antes de tocarlo.
• Respetar las instrucciones de montaje, y en particular los pares de apretado.
• No dejar que penetren líquidos o cuerpos extraños en el producto. La mancata osservanza di questa precauzione può causare gravi rischi per l'incolumità personale o danni alle apparecchiature. RISCHIO DI DANNI MATERIALI E D'INVOLUCRO CALDO
• I pannelli laterali dell'apparecchio possono scottare; lasciar quindi raffreddare il prodotto prima di toccarlo.
• Seguire le istruzioni di montaggio corrette.
• Non far entrare liquidi o oggetti estranei in questo apparecchio. 如不能正确执行这些操作说明， 极有可能造成严重人体伤害或者设备的损坏。 材料损坏和高温外壳的危险性
• 产品的一侧面板可能很热，在其冷却前请 不要触碰。
• 遵照正确的安装说明，包括扭矩值。
• 请勿让液体及其他异物进入本产品。 DatasheetPanel Mount Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.

ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Name Toxic or hazardous Substance and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium (Cr (VI)) biphenyls (PBB) diphenyl ethers (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 有毒有害物质或元素件部 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 DatasheetPanel Mount Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice.