84130104

84130104 CRYDOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. GMS SERIES 17.5mm OUTPUT MODULES

• DIN Rail Mountable Single Point Output Modules (35mm DIN)
• UL and cUL Recognized, CE Compliant
• Zero Voltage or Random Turn-On for AC Modules
• 4kV Optical isolation with LED Indicator
• AC Ratings 12-280 VAC, 5A. DC Output 5-60 VDC, 3A
• Industry standard Color Coding Black (AC Output) Red (DC Output)
• Barrier Strips Accept 14 to 28 AWG Wire. SPECIFICATIONS Input 401031488010314850103148rebmuN traP Nominal Voltage [VDC] 4-32 4-32 4-32 Minimum Voltage [VDC] 4 4 4 Maximum Voltage [VDC] 32 32 32 Drop-out Voltage [VDC] 1.0 1.0 1.0 Maximum Current [mA] (2) 22 22 22 Resistance Current Regulated Current Regulated Current Regulated Output 84130105 84130108 84130104 Nominal Line Voltage 240 VAC 240 VAC 5-60 VDC Minimum Line Voltage 12 VAC 12 VAC 5 VDC Maximum Line Voltage 280 VAC 280 VAC 60 VDC Max Off-State Voltage (3) 800 Vpeak 800 Vpeak 60 VDC Max Off-State Leakage (4) 0.1mArms 0.1mArms 10 uA Static Off-State dv/dt (5) 50 V/usec 50 V/usec N/A Maximum Rated On-State Current (6) 5.0 Arms 5.0 Arms 3.0 A Minimum On-State Current 50 mArms 50 mArms 10 mA Max Surge Current (7) 350 Apeak 350 Apeak 5.0 A On-State Voltage Drop or Resistance (8) 1.85 V 1.85 V 1.6 V Maximum Turn-On Time [msec] (9) 8.33 0.1 0.05 Maximum Turn-Off Time [msec] (9) 8.33 8.33 0.05 Input/Output Isolation Voltage (10) 4000 Vrms 4000 Vrms 4000 Vrms Input/Output Capacitance 6 pF 6 pF 4 pF Operating Temperature Range -30 to 80°C -30 to 80°C -30 to 80°C Storage Temperature Range -40 to 100°C -40 to 100°C -40 to 100°C Line Frequency Range 47 to 63 Hz 47 to 63 Hz DC GENERAL NOTES (1) Specifications apply to an ambient temperature of -30 to 80 °C unless otherwise noted. (2) Modules are current limited +/- 10% at 25°C. (3) Maximum 1 minute duration for AC modules when applied as a DC voltage rather than Peak AC voltage. (4) At maximum line voltage, 25°C for AC modules and 80°C for DC module. (5) Minimum dv/dt per EIA/NARM RS443, method RS397. dv/dt ratings do not apply to DC module. (6) At 25°C, derate AC modules by 50 mA/°C to 80°C; derate DC module by 21.5mA/°C to 80°C. (7) At 25°C, maximum duration: 1 AC cycle for AC modules, 1 second for DC module. (8) At maximum rated on-state current and 25°C. (9) At maximum line voltage, maximum rated output current, nominal input voltage, 25°C. (10) At 25°C for 1 second maximum duration. (1)

Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. EQUIVALENT CIRCUIT DIAGRAMS / MECHANICAL SPECIFICATIONS AGENCY APPROVALS E46203 Rev. 080916

Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH.

• Disconnect all power before installing or working with this equipment.
• Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION.
• Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
• Verificar todas las conexiones y colocar todas las tapas antes de energizer el equipo. El incumplimiento de estas instrucciones puede provocar la muerte o lesiones serias. RISQUE DE DESCHARGE ELECTRIQUE OU EXPLOSION
• Eteindre toutes les sources d'énergie de cet appareil avant de travailler dessus de cet appareil
• Vérifier tous connections, et remettre tous couverts en olace avant de mettre sous De non-suivi de ces instructions provoquera la mort ou des lésions sérieuses sérieuses. GEFAHR EINES ELEKTRISCHE N SCHLAGES ODER EINER EXPLOSION.
• Stellen Sie jeglichen Strom ab, der dieses Gerät versorgt, bevor Sie an dem Gerät Arbeiten durchführen
• Vor dem Drehen auf Energie alle Anschlüsse überprüfen und alle Abdeckungen ersetzen. Unterlassung dieser Anweisungen können zum Tode oder zu schweren Verletzungen führen. RISCHIO DI SCOSSA ELETTRICA O DELL’ESPLOSIONE.
• Spenga tutta l'alimentazione che fornisce questa apparecchiatura prima di lavorare a questa apparecchiatura
• Verificare tutti i collegamenti e sostituire tutte le coperture prima dell’accensione L'omissione di queste istruzioni provocherà la morte o lesioni serie 存在电击、 爆炸或电弧 闪烁危险
• 在操作此设 备之前请先 关闭电源。 若不遵守这些说明， 可能会导致严重的 人身伤害甚至死亡。 WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / ࠂܯ RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE
• The product's side panels may be hot, allow the product to cool before touching.
• Follow proper mounting instructions including torque values.
• Do not allow liquids or foreign objects to enter this product. Failure to follow these instructions can result in serious injury, or equipment damage. RISQUE DE DOMMAGE MATERIEL ET DE SURCHAUFFE DU BOITIER
• Les panneaux latéraux du produit peuvent être chauds. Laisser le produit refroidir avant de le toucher.
• Respecter les consignes de montage, et notamment les couples de serrage.
• Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, des lésions corporelles graves ou des dommages matériels. Die Nichtbeachtung dieser Anweisung kann Körperverletzung oder Materialschäden zur Folge haben. GEFAHR VON MATERIALSCHÄDEN UND GEHÄUSEERHITZUNG
• Die Seitenwände können heiß sein. Lassen Sie das Produkt abkühlen, bevor Sie es berühren.
• Beachten Sie die Montageanweisungen,
• Führen Sie keine Flüssigkeiten oder Fremdkörper in das Produkt ein. Si no se respetan estas precauciones pueden producirse graves lesiones, daños materiales. RIESGO DE DAÑOS MATERIALES Y DE SOBRECALENTAMIENTO DE LA UNIDAD
• Los paneles laterales del producto pueden estar calientes. Esperar que el producto se enfríe antes de tocarlo.
• Respetar las instrucciones de montaje, y en particular los pares de apretado.
• No dejar que penetren líquidos o cuerpos extraños en el producto. La mancata osservanza di questa precauzione può causare gravi rischi per l'incolumità personale o danni alle apparecchiature. RISCHIO DI DANNI MATERIALI E D'INVOLUCRO CALDO
• I pannelli laterali dell'apparecchio possono scottare; lasciar quindi raffreddare il prodotto prima di toccarlo.
• Seguire le istruzioni di montaggio corrette.
• Non far entrare liquidi o oggetti estranei in questo apparecchio. 如不能正确执行这些操作说明， 极有可能造成严重人体伤害或者设备的损坏。 材料损坏和高温外壳的危险性
• 产品的一侧面板可能很热，在其冷却前请 不要触碰。
• 遵照正确的安装说明，包括扭矩值。
• 请勿让液体及其他异物进入本产品。

Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Name Toxic or hazardous Substance and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium (Cr (VI)) biphenyls (PBB) diphenyl ethers (PBDE) Semiconductor die Solder 附件 - 环保信息 ሰྛြѓሙ4+5 有毒有害物质或元素件部 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点