83832

82092 VISHAY | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

Features

• Photo detector and preamplifier in one package  Internal filter for PCM frequency  Improved shielding against electrical field disturbance  TTL and CMOS compatibility  Output active low  Low power consumption Special Features  Improved immunity against ambient light  Suitable burst length ≥ 10 cycles/burst Parts Table Block Diagram Application Circuit Part Carrier Frequency TSOP2230WE1 30 kHz TSOP2233WE1 33 kHz TSOP2236WE1 36 kHz TSOP2237WE1 36.7 kHz TSOP2238WE1 38 kHz TSOP2240WE1 40 kHz TSOP2256WE1 56 kHz 30 kΩ VS OUTDemo- GND PassAGCInput PIN Band dulator Control Circuit 16835 C1 = 4.7 µF TSOPxxxx OUT GND Circuit µC R1 =1 0 0Ω +VS GND Transmitter with TSALxxxx VS R1 +C 1 recommended to suppress power supply disturbances. VO The output voltage should not be hold continuously at a voltage below V O = 3.3 V by the external circuit. 16842

www.vishay.com Document Number 82092 Rev. 1.6, 31-Jan-05 TSOP22..WE1 Vishay Semiconductors Absolute Maximum Ratings Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Electrical and Optical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Value Unit Supply Voltage (Pin 2) V S - 0.3 to + 6.0 V Supply Current (Pin 2) I S 5m A Output Voltage (Pin 1) V O - 0.3 to + 6.0 V Output Current (Pin 1) I O 5m A Junction Temperature T j 100 °C Storage Temperature Range T stg - 25 to + 85 °C Operating Temperature Range T amb - 25 to + 85 °C Power Consumption (T amb ≤ 85 °C) P tot 50 mW Soldering Temperature t ≤ 5 s T sd 260 °C Parameter Test condition Symbol Min Typ. Max Unit Supply Current (Pin 2) V S = 5 V, Ev = 0 I SD 0.8 1.2 1.5 mA VS = 5 V, Ev = 40 klx, sunlight I SH 1.5 mA Supply Voltage (Pin 2) V S 4.5 5.5 V Transmission Distance E v = 0, test signal see fig.1, IR diode TSAL6200, IF = 250 mA d3 5 m Output Voltage Low (Pin 1) IOL = 0.5 mA, Ee = 0.7 mW/m2, f = fo VOL 250 mV Minimum Irradiance (30 - 40 kHz) Pulse width tolerance: tpi - 6/fo < tpo < tpi + 5/fo, test signal see fig.1 Ee min 0.2 0.5 mW/m2 Minimum Irradiance (56 kHz) Pulse width tolerance: t pi - 6/fo < tpo < tpi + 5/fo, test signal see fig.1 Ee min 0.3 0.7 mW/m2 Maximum Irradiance t pi - 5/fo < tpo < tpi + 6/fo Ee max 30 W/m2 Directivity Angle of half transmission distance ϕ1/2 ± 45 deg

www.vishay.com Document Number 82092 Rev. 1.6, 31-Jan-05 TSOP22..WE1 Vishay Semiconductors Package Dimensions in mm 15843

TSOP22..WE1 Document Number 82092 Rev. 1.6, 31-Jan-05 Vishay Semiconductors www.vishay.com Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performanc e of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Cl ean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423