838-IF100.0M-D OSCILENT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

. . IF SAW Filter Part Number Package Application Last Modified 838-IF100.0M-D 38.0 x 25.0 Thru Hole Base Station & Repeater May 24 2003 TYPE :

100.0 MHz Bandpass Filter

19.20 MHz Bandwidth

PART NUMBER : 838-IF100.0M-D OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency - 100.00 - MHz Insertion Loss - 25.0 30.0 dB 1dB Bandwidth 18.90 19.00 - MHz 3dB Bandwidth 19.20 19.27 - MHz 40dB Bandwidth - 20.38 20.50 MHz Passband Ripple - 0.70 1.0 dB Group Delay Variation - 50 100 nsec Absolute Delay - 2.67 - µsec Ultimate Rejection 50 55 - dB Substrate Material - 128° LN - - Ambient Temperature - 25 - °C * Custom SAW IF Filters available. Contact Oscilent for assistance. PACKAGE OUTLINE (mm) TEST FIXTURE Contact Oscilent for Test Fixture Details Page 1 of 2Oscilent Corporation IF SAW Filter | 838-IF100.0M-D 12/28/2005http://www.oscilent.com/spec_pages/if_sawfilter/if_838_if100_0d.htm

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map Part No.: 838-IF100.0M-D Page 2 of 2Oscilent Corporation IF SAW Filter | 838-IF100.0M-D 12/28/2005http://www.oscilent.com/spec_pages/if_sawfilter/if_838_if100_0d.htm