8360 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • Non-contacting technology: Provides long life
  • Output signal choices: Analog, PWM, CAN Bus
  • Electrical angle: The standard version is available with rotational angles in 15 degree increments, up to 360°
  • Connector: Flying lead terminated w/6 pin AMP connector P/N 776434-1, contact P/N 1924463-1, other options available
  • Through-hole design: Fits around shaft, shaft options available
  • Environmental: IP65-protected from dust and water jets
  • Operating temperature: -40°C to 125°C
  • Electrical protection: Overvoltage, short circuit, ESD
  • Magnetic Shielding to 20G The 8360 Series is latest addition to the company’s line-up of robust, reliable, and highly accurate non-contacting position sensors. The 8360’s low profile and throughhole design make it desirable for applications like steering wheel and boom angle, where space is limited and the sensor must mount around a shaft. The sensor’s dual analog output is capable of resolving 360 degrees of motion with high accuracy and 12 bit resolution. The 8360 Series provides IP65 sealing, 360 degree continuous rotation, a robust package and wide operating temperature range, making it especially well suited for applications with harsh environments like industrial vehicles, agricultural and construction equipment and process controls. Non- contacting, redundant outputs provide the high reliability and long life that are an absolute necessity in applications such as medical equipment or wind/solar energy applications. A wide range of adaptations are available including PWM or Can Bus output, shaft interface, electrical angle, connector type, cable length, output slope and much more. Electrical Angle 15° to 360° in 15 degree increments standard (other options available) Input Voltage 5.0 V±0.25V DC Input Current 16mA maximum per output 32mA maximum total (both channels) Sensor Output 0.25V – 4.75V for Analog at 5.0V input Accuracy +/- 0.6% Resolution 12 Bit, 0.088 degree Mechanical Mechanical travel Travel 0° to +360° with no stops, allowing for 360 degree continuous rotation Actuation (starting) Torque 0.2 N-m (28.5 oz-in) Weight 220 grams max. Rotational Life 10 million revolutions

sensata.com Page 2 Copyright © 2022 Sensata Technologies, Inc. Environmental Consult factory for options including:

  • Non-standard output slope
  • Clipped outputs
  • Non-standard Active Electrical Angles
  • PWM output (pulse width modulation)
  • Special marking
  • CAN Bus output
  • Multi-turn
  • Lead length
  • Connector type
  • IP67 sealing
  • Shaft interface Environmental Sealing IP65 standard Electromagnetic Compatibility 100V/meter, 15kHz – 1GHz range Vibration 10 – 10,000 Hz, Total PSD: 4.94 Grms Shock 50Gs, half sine pulse, 11 m sec duration Operating temperature range -40°C to 125°C Storage temperature range -40°C to +105°C Family Standard Active Electrical Angles 8360 015 = 15 degrees 030 = 30 degrees 045 = 45 degrees 060 = 60 degrees 075 = 75 degrees 090 = 90 degrees 105 = 105 degrees 120 = 120 degrees 135 = 135 degrees 150 = 150 degrees 165 = 165 degrees 180 = 180 degrees 195 = 195 degrees 210 = 210 degrees 225 = 225 degrees 240 = 240 degrees 255 = 255 degrees 270 = 270 degrees 285 = 285 degrees 300 = 300 degrees 315 = 315 degrees 330 = 330 degrees 345 = 345 degrees 360 = 360 degrees ORDERING OPTIONS Example : 8360075

8360 Sensor with 75 Degrees Active Electrical Angle

Rev.09/05/2022 Americas +1 (800) 350 2727 sensors@sensata.com Europe, Middle East & Africa +33 (3) 88 20 8080 position-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Page 3 sensata.com CONTACT US Copyright © 2022 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements, and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED, OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY , AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA SPLINE DETAILS OUTPUT FUNCTION CONNECTOR Rotor Interface is 12 tooth spline Pitch Angle 30° Diametral Pitch 16/32 Pitch Diameter 19.05 Largest Diameter 20.3 ± 0.1 Smallest Diameter 16.5 ± 0.5/-0 (Ref ANSI B92.1 - 1970 Tol. Class B) Connector Pin Layout PIN # 1 2 3 4 5 6 Pinout Voltage Supply Output 1 GND Voltage Supply Output 2 GND Color Red White Black Yellow Green Brown