835-IF240.0M-C OSCILENT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Part Number Package Application Last Modified 835-IF240.0M-C 35.0 x 12.8 Thru Hole Base Station & Repeater Jan. 01, 2007 TYPE :

240.0 MHz Bandpass Filter

PART NUMBER : 835-IF240.0M-C OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency 239.85 240.00 240.15 MHz Insertion Loss - 26.3 28.0 dB Source Impedance (single ended)* - 50 - ohm Load Impedance (single ended)* - 50 - ohm 1.0dB Bandwidth 4.0 4.21 - MHz 3.0dB Bandwidth 4.2 4.42 - MHz 40.0dB Bandwidth - 5.25 5.4 MHz Amplitude Ripple (Fo+/-1.875 MHz) - 0.6 1.0 dBp-p Group Delay Variation (Fo+/1.875 MHz) - 100 200 ns Absolute Delay at Fo - 3.08 - µs Ultimate Rejection - 50 - dB Temperature Coefficient - -0.03 - ppm/°C Storage Temperature -40 - +85 °C Operating Temperature -30 - +70 °C * with Matching Network (Ref. Testing Environment Circut as shown below). Those impedances could be modified with different impedances values and/or structures, if necessary. ** Custom SAW IF Filters available. Contact Oscilent for assistance. PACKAGE OUTLINE (mm) PIN Descriptions: IN-1, OUT 5, GROUND -2,3,4,6,Case Page 1 of 2Oscilent Corporation IF SAW Filter | 835-IF240.0M-C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map TEST ENVIRONMENT Source & Load Impedance: 50 ohm FREQUENCY RESPONSE Part No.: 835-IF240.0M-C Page 2 of 2Oscilent Corporation IF SAW Filter | 835-IF240.0M-C