8347A HP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
8347A, 8447A, and 8447D Amplifiers Data Sheet RF & Microwave Amplifiers Specifications Summary for 8347A RF Amplifier (Discontinued) and 8447A/D Preamplifier 8347A RF Amplifier (Discontinued) 8447A Preamplifier 8447D Preamplifier Frequency range 100 kHz to 3 GHz 0.1 to 400 MHz 100 kHz to 1.3 GHz Typical 3 dB bandwidth — 50 kHz to 700 MHz 75 kHz to 1.7 GHz Maximum leveled output power ≥ +20 dBm — — Output power leveling range (≥ 300 kHz): +2 to +20 dBm — — Gain (mean, per channel) ≥ 25 dB 20 dB ± 1.0 dB at 10 MHz > 25 dB (20° to 30 °C) (20° to 30 °C) Gain flatness across Internally leveled ±1.8 dB (0° to 55 °C) ±1.5 dB full frequency range ±300 kHz: ±1.5 dB ±0.7 dB (20° to 30 °C) characteristic Noise figure 10 MHz to 3 GHz: 15 dB < 7 dB < 8.5 dB Below 10 MHz: 20 dB Output power for 1 dB +22 dBm > +6 dBm > +7 dBm typical gain compression Third-order intercept +30 dBm — — Harmonic distortion (at +20 dBm output) –32 dB for 0 dBm output –30 dB for 0 dBm output Internal level off (ALC off): ≤ –25 dBc Internal level on (ALC on): ≤ –20 dBc (typical) Maximum input for minimum –14 dBm — — internally leveled output Output for <–60 dB –25 dBm (characteristic) –30 dBm harmonic distortion VSWR 2.0: 1 input < 1.7 < 2.0 input 1.5: 1 output internally leveled < 2.2 output 2.0: 1 output unleveled below 2 GHz 1 to 1300 MHz 3.0: 1 output unleveled 2 GHz to 3 GHz Reverse isolation 60 dB > 30 dB > 40 dB Maximum dc voltage output — ±10 V ±10 V Size 213 mm W x 102 mm H x 298 mm D 130 mm W x 85.8 mm H x 216 mm D 130 mm W x 85.8 mm H x 216 mm D Weight Net, 4 kg (8 lb) Net, 1.56 kg (3.4 lb) Net, 1.56 kg (3.4 lb) Shipping, 5 kg (11 lb) Shipping, 2.3 kg (5.1 lb) Shipping, 2.3 kg (5.1 lb) Power requirements — 110 or 230 Vac + 10%, 110 or 230 Vac + 10% 48 to 440 Hz, 15 W 48 to 440 Hz, 15 W Options available Option 001: Dual-channel amp Option 001: Dual-channel amp BNC (f) connectors BNC (f) connectors Option 010: Single-channel amp Type-N (f) connectors Option 011: Dual-channel amp Type-N (f) connectors
www.agilent.com/fi nd/emailupdates Get the latest information on the products and applications you select. www.agilent.com/fi nd/agilentdirect Quickly choose and use your test equipment solutions with confi dence. Agilent Email Updates Agilent Direct www.agilent.com For more information on Agilent Technologies’ products, applications or services, please contact your local Agilent offi ce. The complete list is available at: www.agilent.com/fi nd/contactus Americas Canada (877) 894-4414 Latin America 305 269 7500 United States (800) 829-4444 Asia Pacifi c Australia 1 800 629 485 China 800 810 0189 Hong Kong 800 938 693 India 1 800 112 929 Japan 0120 (421) 345 Korea 080 769 0800 Malaysia 1 800 888 848 Singapore 1 800 375 8100 Taiwan 0800 047 866 Thailand 1 800 226 008 Europe & Middle East Austria 0820 87 44 11 Belgium 32 (0) 2 404 93 40 Denmark 45 70 13 15 15 Finland 358 (0) 10 855 2100 France 0825 010 700* *0.125 € fi xed network rates Germany 01805 24 6333 0.14€/minute Ireland 1890 924 204 Israel 972-3-9288-504/544 Italy 39 02 92 60 8484 Netherlands 31 (0) 20 547 2111 Spain 34 (91) 631 3300 Sweden 0200-88 22 55 Switzerland (French) 41 (21) 8113811(Opt 2) Switzerland (German) 0800 80 53 53 (Opt 1) United Kingdom 44 (0) 118 9276201 Other European Countries: www.agilent.com/fi nd/contactus Revised: October 24, 2007 Product specifi cations and descriptions in this document subject to change without notice. © Agilent Technologies, Inc. 2004, 2008 Printed in USA, February 21, 2008 5989-1696EN Remove all doubt Our repair and calibration services will get your equipment back to you, performing like new, when prom- ised. You will get full value out of your Agilent equipment through- out its lifetime. Your equipment will be serviced by Agilent-trained technicians using the latest factory calibration procedures, automated repair diagnostics and genuine parts. You will always have the utmost confi dence in your measurements. Agilent offers a wide range of ad- ditional expert test and measure- ment services for your equipment, including initial start-up assistance, onsite education and training, as well as design, system integration, and project management. For more information on repair and calibration services, go to: www.agilent.com/fi nd/open Agilent Open simplifi es the process of connecting and programming test systems to help engineers design, validate and manufacture electronic products. Agilent offers open connectivity for a broad range of system-ready instruments, open industry software, PC-standard I/O and global support, which are combined to more easily integrate test system development. Agilent Open www.agilent.com/fi nd/removealldoubt