832A519N

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

• Page 24 - - Page 25 - s Specifications for "F" Connectors F style connectors are the least expensive, general purpose connectors with non-constant impedance for use at 500 volts or less, and for use with low frequencies to 500Mhz. These coaxial connectors are widely used in Cable TV, MATV, CCTV, and related consumer television products. They are available in a limited selection to fit various cable sizes. NOTE: See V-Bite 861V509ER6 -40dB @ 2.3GHz MATERIALS Connector Parts Material Connector Body and Parts Brass Male Contact Pin Brass Insulators Polypropylene Plating Nickel Ferrule Annealed Copper ELECTRICAL Requirement Performance Impedance Non Constant Frequency Range 0-500MHz (see below 861V509ER6 to 3GHz) VSWR 1.5 Max. Working Voltage (At Sea level) 500V rms Insulation Resistance 5000 Megohm Min. Contact Resistance 3 mW Max. Test Voltage 1000V r.m.s MECHANICAL & ENVIRONMENTAL Requirement Performance Durability 500 Matings Shock 30 G Cable Retention 40 Lbs. Min. Temperature Range -40 to +65°C. Moisture Range Continuous Test FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 back to index 24 "F" Connectors

s ss s Plugs, Jacks, Adapters F type plugs are available in three different crimp styles: two piece with separate ferrules, one piece crimp with a short crimp body and a one piece crimp with a long body. Also, a twist-on type for tool-less installations. Jacks for bulkhead, inline, or PC board, and a variety of adapters are all machined brass construction. Part Number Description RG/U Cable Fig. No. 810A209A

2 Piece Crimp Plug, Short Ferrule 6 117

2 Piece Crimp Plug, Short Ferrule 11 117

2 Piece Crimp Plug, Short Ferrule 59 117

2 Piece Crimp Plug, Long Ferrule 59 118

4 Pc Crimp Mini Coax. Uses BD11007 Tool 174 117A 810D209D

1 Piece Crimp Plug, Short Ferrule 11 119

1 Piece Crimp Plug, Short Ferrule 59 119

1 Piece Crimp Plug, Long Ferrule 6 120

1 Piece Crimp Plug, Long Ferrule 11 120

1 Piece Crimp Plug, Long Ferrule 59 120

Male Bulkhead Receptacle. 3/8-32 THD I.D. Any 130A 826B519 Bulkhead Jack, Solder Tab Any 123 832A519N Inline Female/Female W/Nut &Washer N/A 124 830A509 Inline, Male/Male N/A 125 831B509 Inline Female/Male Push-On N/A 125A 832A519 Inline Female/Female N/A 126 843A509 “T” Adapter, Female/Male/Female N/A 127 845A509 “T” Adapter, Female/Female/Female N/A 128 851A509 Right Angle Adapter, Male/Female N/A 129 F0884

75 Ohm Male Terminator N/A 130

RoHS compliant REQUEST QUOTE REQUEST DRAWING Fig. 117 Fig. 117A Fig. 118 Fig. 119 Fig. 120 Fig. 121 Also See Push-EZ™ Next Page Fig. 122 Fig. 123 Fig. 124 Adapters & Terminators Fig. 125 Fig. 126 Fig. 125A Fig. 127 Fig. 128 This recessed male acts as a jack & allows for a replaceable female end by using a 832A519 adapter. Also, this can be used to accommodate any adapter with a female F interface on one side. The other end can be BNC, TNC, or any style available. (See adapter pages) Fig. 129 Fig. 130 Fig. 130A2 3/8 - 32 Internal Thd. ½ - External Thd.

• Page 26 - s FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 back to index 25 s Push EZ™ “F” Plugs With LIFT™ Bomar’s exclusive LIFT® Technology (Low Insertion Force Termination) is used in the patented Push-EZ™ connector. It installs by simply stripping the cable and inserting it into the connector. That’s it. And it will not pull out. No crimp tooling required. Part Number Description RG/U Cable Body Plating 810PE209A Push-EZ™ Plug with LIFT® Technology 6 Nickel 810PE209G Push-EZ™ Plug with LIFT® Technology 59 Nickel 810PE205A Push-EZ™ Plug with LIFT® Technology 6 Gold 810PE205G Push-EZ™ Plug with LIFT® Technology 59 Gold RoHS compliant REQUEST QUOTE REQUEST DRAWING PC Board Connectors Part Number Description RG/U Cable Fig. No. 861A509 PC Board Jack, Vertical N/A 131 861V509E V-Bite™ Edge Mount PC Jac k N/A 131V 861V509ER V-Bite™ Reflow Type w/ TFE Insulator RG59 N/A 131V 861V509ER6 V-Bite™ Reflow Type w/ TFE Insulator RG6/59 (3GHz) N/A 131V 864B509 PC Board Jack, Right Angle, Long N/A 132 864B509HF PC Board Jack, Right Angle, Long (3GHz) N/A 132 864B509S PC Board Jack, Right Angle, Short N/A 133 866B509 PC Board Male, Right Angle The Eliminator™ N/A 136B RoHS compliant reflow or wave solder RoHS compliant wave solder only REQUEST QUOTE REQUEST DRAWING

• Page 27 - Fig. 131 Fig. 132 Fig. 133 Fig. 135B The V-Bite™ V-Bite™ Mounts on the PC board edge and is extremely anti-rotational. It locks into the board for soldering. Available in reflow soldering version. Fig. 131V V-Bite™ Mounts on the PC board edge and is extremely anti- rotational. It locks into the board for soldering. Available in reflow soldering version. PCB Layout 864B Series FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111 back to index 26