82P33931 RENESAS | Alldatasheet

Document overview

  • Manufacturer or author: epieczon
  • PDF pages: 5

Technical content

0©2017 Integrated Device Technology, Inc. April 5, 2017 HIGHLIGHTS

  • System implements ITU-T telecom profiles
  • Composed of IDT’s IEEE 1588 software and IDT’s Synchronization Management Unit (SMU) hardware
  • Operates as IEEE 1588 / PTP slave
  • Recovers accurate and stable syn chronization signals from packet based IEEE 1588 / PTP master
  • Provides integrated physical layer frequency support
  • Operates as an IEEE 1588 / PTP master SOFTWARE
  • C99 source code distribution, supporting POSIX-based Operating Sys- tems (OSs) such as Linux
  • IEEE 1588 compliant Precision Time Protocol (PTP) stack
  • Abstraction interface supports user-supplied IEEE 1588 compliant Pre- cision Time Protocol (PTP) stack
  • Reference trackers filter packet synchronization noise from IEEE 1588 unaware networks HARDWARE
  • Synchronization Management Unit (S MU) provides tools to manage physical layer and packet based synchronous clocks for IEEE 1588 Telecom Profile applications
  • Supports independent IEEE 1588 and Synchronous Ethernet (SyncE) timing paths
  • Combo mode provides SyncE physical layer frequency support for IEEE

1588 Telecom Boundary Clocks (T-BC) and Telecom Time Slave Clocks

(T-TSC) per G.8273.2

  • Digital PLLs can be configured as Digitally Controlled Oscillators (DCOs) for IEEE 1588 clock synthesis
  • Generates G.8262 compliant SyncE clocks
  • Fractional-N input dividers supp ort a wide range of reference frequen- cies
  • Locks to 1 pulse per second (PPS ) references from GPS based sources
  • Loads configuration from an external EPROM after reset

APPLICATIONS

  • Access routers, edge routers, core routers
  • Carrier Ethernet switches
  • Multiservice access platforms
  • PON OLT
  • LTE eNodeB
  • ITU-T G.8265.1 & G.8275.1 Telecom Profile clock synthesizer
  • ITU-T G.8273.2 Telecom Boundary Clock (T-BC) and Telecom
  • Time Slave Clock (T-TSC)
  • ITU-T G.8264 Synchronous Equi pment Timing Source (SETS)
  • ITU-T G.8263 Packet-based Equipment Clock (PEC)
  • ITU-T G.8262 Synchronous Ether net Equipment Clock (EEC)
  • ITU-T G.813 Synchronous Equipment Clock (SEC)
  • Telcordia GR-253-CORE Stratum 3 Clock (S3) and SONET Minimum Clock (SMC) Synchronization System for IEEE 1588 82P33931 / 82P33931-1 Datasheet

1©2017 Integrated Device Technology, Inc. April 5, 2017 82P33931-1 Datasheet

DESCRIPTION

IEEE 1588-2008 Precision Time Protocol (PTP) is a packet-based syn- chronization mechanism used in packet-switched networks. PTP synchro- nizes the clocks of different devices with the most accurate clock on the network – usually a precise, grandmaster clock, such as one using a Pri- mary Reference Time Clock (PRTC) time signal. The 82P33931-1 is a soft- ware and hardware system that can operate as a PTP slave or PTP master. As a PTP slave the 82P33931-1 recovers accurate and stable electrical synchronization signals from a packet based reference gener- ated by a PTP master. As a PTP master the 82P33931-1 can lock to a sta- ble electrical clock source and generate packet based PTP references for downstream PTP slaves The 82P33931-1 is available with several software and hardware options. The software options are outlined in Table 1 by root part number. The hardware options depend on the choice of Synchronization Management Unit (SMU) hardware; the SMU hardware documentation is listed in Table 3 by root part number. System Component Documentation The detailed characteristics of the 82P33931-1 software and hardware components are described in other documents as shown in Table 2 and Table 3. Table 1: Software Options by Root Part Number Root Part Number Included Software 82P33931 IDT clock recovery servo software 82P33931-1 IDT clock recovery servo software IEEE 1588 Protocol Stack Table 2: Software Documentation Software System Component Software Documentation 82P33931-1 IEEE 1588 software Please contact IDT Table 3: SMU Hardware Documentation Root Part Number Documentation 82P33931 82P33931-1 82P33831 datasheet

2©2017 Integrated Device Technology, Inc. April 5, 2017 82P33931-1 Datasheet

ORDERING INFORMATION

Table 5: Pin 1 Orientation in Tape and Reel Packaging Table 4: Ordering Information Part/Order Number Package Shipping Packaging Temperature 82P33931BAG 144-pin CABGA green package Tray -40o to +85oC 82P33931BAG8 144-pin CABGA green package T ape & Reel, Pin 1 Orientation: EIA-481-C -40o to +85oC 82P33931-1BAG 144-pin CABGA green package Tray -40o to +85oC 82P33931-1BAG8 144-pin CABGA green package Tape & Reel, Pin 1 Orientation: EIA-481-C -40o to +85oC Part Number Suffix Pin 1 Orientation Illustration NLG8 BAG8 Quadrant 1 (EIA-481-C) NLG/W Quadrant 2 (EIA-481-D) USER DIRECTION OF FEED Correct Pin 1 ORIENTATION CARRIER TAPE TOPSIDE (Round Sprocket Holes) USER DIRECTION OF FEED Correct Pin 1 ORIENTATION CARRIER TAPE TOPSIDE (Round Sprocket Holes)

DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the righ t to modify the products and/or specifications described herein at any time, without notice, at IDT’s sole discretion. Performance specifications and operating param eters of the described products are determined in an independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or wa rranty of any kind, whether express or implied, including, but not limited to, the suitabil ity of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of t he intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT's products are not intended for use in applications involvi ng extreme environmental conditions or in life support systems o r similar devices where the failure or malf unction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the U nited States and other count ries. Other trademarks used herein are the property of Tech Support www.IDT.com/go/support Sales 1-800-345-7015 or 408-284-8200 Fax: 408-284-2775 www.IDT.com/go/sales Corporate Headquarters

6024 Silver Creek Valley Road

San Jose, CA 95138 USA www.IDT.com 82P33931-1 Datasheet 3©2017 Integrated Device Technology, Inc. April 5, 2017

REVISION HISTORY

Rev. Date Description of Change 1 05/14/2015 Initial Release 2 03/14/2016 Added part number 82P33913/82P33913-1 throughout the datasheet. Ordering Information table - added 82P33913/82P33913-1 part number information. 3 3/16/2016 Table 4, Ordering Information Table - corrected “Shipping & Packaging” for 82P33913/ -1. 4 4/5/2017 Separated parts into individual datasheets.

© 202 Renesas Electronics Corporation. All rights reserved. IMPORTANT NOTICE AND DISCLAIMER RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. Renesas grants you permission to use these resources only for development of an application that uses Renesas products. Other reproduction or use of these resources is strictly prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property. Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims, damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use o any Renesas resources expands or otherwise alters any applicable warranties or warranty disclaimers for these products. ('LVFODLPHURev.1.0 Mar 2020) Corporate Headquarters Contact Information TOYOSU FORESIA, 3-2-24 Toyosu, For further information on a product, technology, the most Koto-ku, Tokyo 135-0061, Japan up-to-date version of a document, or your nearest sales www.renesas.com office, please visit: www.renesas.com/contact/ Trademarks Renesas and the Renesas logo are trademarks of Renesas Electronics Corporation. All trademarks and registered trademarks are the property of their respective owners.