827-IF115.0M-B OSCILENT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

. . IF SAW Filter Part Number Package Application Last Modified 827-IF115.0M-B 27.0 x 12.0 Thru Hole Base Station & Repeater May 24 2003 TYPE :

115.0 MHz Bandpass Filter

26.10 MHz Bandwidth

PART NUMBER : 827-IF115.0M-B OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency 114.91 115.00 115.09 MHz Insertion Loss - 23.1 25.0 dB 1dB Bandwidth 25.5 25.6 - MHz 3dB Bandwidth 26.1 26.25 - MHz 40dB Bandwidth - 28.60 28.80 MHz Passband Ripple - 0.70 1.0 dB Group Delay Variation - 35 80 nsec Absolute Delay - 1.573 - µsec Ultimate Rejection 50 55 - dB Substrate Material - LN - - Ambient Temperature - 25 - °C * Custom SAW IF Filters available. Contact Oscilent for assistance. PACKAGE OUTLINE (mm) TEST FIXTURE L1 = 39nH Source/Load Impedance = 50 ohms Part No.: 827-IF115.0M-B Page 1 of 2Oscilent Corporation IF SAW Filter | 827-IF115.0M-B 12/28/2005http://www.oscilent.com/spec_pages/if_sawfilter/if_827_if115_0b.htm

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map Page 2 of 2Oscilent Corporation IF SAW Filter | 827-IF115.0M-B 12/28/2005http://www.oscilent.com/spec_pages/if_sawfilter/if_827_if115_0b.htm