RBOX630_V01 AXIOMTEK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

IsolationEN60950Freescale i.MX 6 Ext. Temp IP30 Robust RISC-based DIN-rail Fanless Embedded System with i.MX 6 Processor 4 COM, 2 CAN Bus and DIO Rear view Easy-to-access interface DIN-rail kit

1 Console port Power Relay Pin

1 DIO (8 IN/ 8 OUT) 1 OTG USB

3 Antenna hole

(for 3G/GPRS/Wi-Fi)

1 HDMI

(Support screw lock)

4 COM

2 CAN Bus

2 LAN

The rBOX630 cost-effective DIN-rail fanless embedded system utilizes the low power RISC-based module (i.MX 6) processor and is designed to withstand temperatures ranging from -40°C to +70°C for using in harsh environment and industrial automation applications. The rBOX630 features 4 RS-232/422/485 serial ports, dual LANs, 8 digital input channels, 8 digital output channels, 2 CAN bus and 1 eMMC onboard 8 GB & 1 x SDHC socket for storage expansion (easy to access) in a compact, IP30 protected, industrial-strength robust case. Two power paths input minimize the risk of data loss in the event of a single power failure. Its vertical DIN-rail form factor makes it easy to install the system in a small cabinet. Because of ARM's low power consumption architecture, rBOX630 generate little heat while being operated. The ready-to-run rBOX630 is specially designed for industrial machine, automatic parking lot, traffic cabinet and more. Specifications Standard Color Sliver-Black Construction Extruded aluminum and heavy-duty steel, IP30 CPU i.MX 6, Cortex-A9 RISC CPU, 800MHz System Board Q7M120 System Memory 1 x DDR3-1600 onboard, 1GB System I/O Outlet Serial Port 4 x RS-232/422/485 (COM 1-4) COM 1-4 with TX/RX/RTS/CTS signals RS-232/422/485 interface select by software LAN 1 x 10/100/1000 Mbps Ethernet 1 x 10/100 Mbps Ethernet Magnetic isolation protection 1.5 KV System I/O Outlet HDMI 1 x HDMI (Support screw lock) USB 1 x USB 2.0 OTG CAN 2 CAN 2.0 B (Phoenix connector, non-isolation) Meets ISO 11898 standard Software control termination resistor 120 ohm can high speed up to 1Mbit/s for transmit/receive

  • Fanless design
  • RISC-based module (i.MX 6) processor
  • 1GB DDR3 SDRAM onboard
  • 8GB eMMC on board
  • Completed industrial AP development software
  • 12 - 48 VDC wide range power input with terminal block
  • Ready-to-run embedded Linux operating system
  • Wide operating temperature range from -40°C to +70°C
  • All specifications and photos are subject to change without notice. DIN-rail Embedded Systems2 126125 Specifications System I/O Outlet DIO 1 x DIO (8-in/ 8-out) with Isolation 2 KV DI: Wet/Dry DO: Wet DI: Input channels: 8, source type Input voltage: 0 to 30 VDC digital input levels for dry contacts: -Logic level 0: close to GND -Logic level 1: open Digital input levels for wet contacts : -Logic level 0: +10V to +24V (DI to COM-) -Logic level 1: +3V max. DO : Output channels: 8, sink type Output current: Max. 200 mA per channel On-state voltage: 24 VDC nominal, open collector to 30 V Optical isolation protection 2 KV Console Port DB9 connector For user setting with debug RTC Battery onboard Provides power for the internal real time clock & calendar Ideal for vibration environment & reduces maintenance efforts Alarm Contact One relay output with current 0.5A@30 VDC Hardware Specifications System I/O Outlet Wireless 1 x Mini card socket (supports USB interface) with 1 x SIM Socket by outside access and is easy plug/pull. 1 x Mini card socket (supports USB & PCIE interface) with 1 x SIM Socket by inside Watchdog Timer WDT 1: one step is 1 sec, 255 levels LEDs System Power, Alarm, Ready/Active, COM (TX, RX), Wireless Alarm DC PWR1 or PWR2 Storage 1 x eMMC 8 GB onboard (for boot disk) Supports 1 x SDHC Card (easy-to-access, for store only.) Installation DIN-rail, wall mount Power Supply Power Input 2 power paths with terminal block Power Input Range 12-48 VDC Power Input Rating 12-48 VDC, 0.74-0.23A Power Protection DC Version: OVP (Over voltage protection) UVP (Under voltage protection) Reverse protection Operating Temperature -40°C to +70°C (-40°F to +158°F) Humidity 10% - 95% Vibration Endurance 5G @ 10-150Hz, amplitude 0.35ms Weight (net/gross) 0.9 kg (2 lb)/1.3kg (2.87 lb) Dimensions 55 mm (2.16") (W) x 110 mm (4.33") (D) x 155 mm (6.10") (H) OS Linux OS: Yocto 3.3 (Hardknott) Kernel: 5.10.72 Certificate FCC Part 18 Heavy Industrial CE

Ordering Information

(P/N:E26M630104) Robust DIN-rail fanless embedded system with Q7-RISC module (i.MX 6), 8GB eMMC, 4 COM, 2 CAN, and DIO (-40°C to +70°C) Optional 826M1000040E Wall mount kit Wireless (3G/GPS or Wi-Fi) module Packing List 8 x Screws 1 x Din-rail kit 1 x Console cable 1 x 6-pin terminal block for CANbus port 1 x 8-pin terminal block for power port 1 x 18-pin terminal block for DIO port