822MKP275KC

472MKP275K ILLINOISCAPACITOR | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com

• EMI filter
• Antenna coupling
• Across the line
• Line bypass MKP Class X2 Radial Lead Metallized Polypropylene Capacitors Voltage Impulse Test ±10% at 1kHz, 25°CCapacitance Tolerance -40°C to +110°C Humidity Test Load Life Voltage Range 50-60Hz VAC Dissipation Factor 0.1% at 1 kHz, 20°C Capacitance Terminal to Terminal Terminal to Case ≤0.33 µF 15,000M Ω at 100VDC >30,000 M Ω at 100VDC >500MΩ at 500VDC >0.33 µF 5,000 M Ω x µF at 100VDC >30,000 M Ω at 100VDC >500MΩ at 500VDC 1000 hours at+110°C with 125% of rated voltage with the voltage increased to 1000Vrms for 0.1 seconds every hour. <5% maximum of initial measured value <0.15% at 1kHz Capacitance Change Dissipation Factor Insulation Resistance <5% of initial measured value <0.15% at 1kHz Self-inductance Dielectric Strength ≤1 nH/mm along the capacitor pitch and lead length Capacitance Drift Factor Capacitance Temperature Coefficient <1 nH/mm along the capacitor pitch and lead length -200 ppm/°C, ± 100ppm/°C Construction Dielectric Electrodes Leads Wound, Extended metallized film Polypropylene film Vacuum deposited zinc layers Tinned copper wire (lead free) Coating Solvent resistant box with flame retardant epoxy sealed resin (UL 94V-O) Terminal to Terminal 310 (UL, CSA) 275 (IEC 60384-14) Operating Temperature Range Terminal to Case 2050VAC applied for 1 minute. Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Capacitance ≤0.33uF >0.33uF 3000 MΩ Terminal to Terminal

7500 MΩ Minimum at 100VDC

2500 MΩxuF Minimum at 100VDC

500 hours at 90 to 95% RH, 40°C and no voltage applied after which the following voltage shall be applied for 1minute to each capacitor C≤0.0068uF 1500VAC, C>0.0068uF 1075VDC Capacitance ≤0.33uF >0.33uF Terminal to Case Terminal to Terminal

15000 MΩ at 100 VDC

C≤0.0068uF 1500Vac or 2121 Vdc for 1 minute C>0.0068uF 1000Vac or 1768 Vdc for 1 minute Cut-off current: 2Aac or 10mAdc Current limiting resistance: 1Ω/V 24 pulses C≤ 1.0uF Vp=2.5kVDC C>1.0uF Vp=2.5kV/√C

3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com MKP STANDARD PART LISTING Convert to inches, divide by 25.4 PART NUMBER dv/dt (v/µs) S dLxHxT (mm) PART NUMBER dv/dt (v/µs) S dLxHxT (mm) 0.0047 472MKP275K 400 13x10x5 10 0.6 0.0047 472MKP275KC 500 10x8x4 7.5 0.6 0.0056 562MKP275KC 500 10x8x4 7.5 0.6 0.0056 562MKP275KD 400 13x10x5 10 0.6 0.0068 682MKP275K 400 13x10x5 10 0.6 0.0068 682MKP275KC 500 10x8x4 7.5 0.6 0.0082 822MKP275KC 500 10x8x4 7.5 0.6 0.0082 822MKP275KD 400 13x10x5 10 0.6 0.01 103MKP275K 400 13x10x5 10 0.6 0.01 103MKP275KC 500 10x8x4 7.5 0.6 0.01 103MKP275KE 300 18x11x5 15 0.8 0.012 123MKP275KC 500 10x8x4 7.5 0.6 0.012 123MKP275KD 400 13x10x5 10 0.6 0.015 153MKP275K 400 13x11x5 10 0.6 0.015 153MKP275KC 500 10x9x4 7.5 0.6 0.015 153MKP275KE 300 18x11x5 15 0.8 0.018 183MKP275KC 500 10x9x4 7.5 0.6 0.018 183MKP275KD 400 13x11x5 10 0.6 0.022 223MKP275K 400 13x11x5 10 0.6 0.022 223MKP275KB 300 18x11x5 15 0.8 0.022 223MKP275KC 500 10x9x4 7.5 0.6 0.027 273MKP275KC 500 10x10x5 7.5 0.6 0.027 273MKP275KD 400 13x11x5 10 0.6 0.033 333MKP275K 400 13x12x6 10 0.6 0.033 333MKP275KC 500 10x10x5 7.5 0.6 0.033 333MKP275KE 300 18x11x5 15 0.8 0.039 393MKP275KC 500 10x11x5 7.5 0.6 0.039 393MKP275KD 400 13x9x4 10 0.6 0.039 393MKP275KE 300 18x11x5 15 0.8 0.047 473MKP275K 300 18x11x5 15 0.8 0.047 473MKP275KC 500 10x12x6 7.5 0.6 0.047 473MKP275KD 400 13x10x5 10 0.6 0.056 563MKP275KC 500 10x12x6 7.5 0.6 0.056 563MKP275KD 400 13x10x5 10 0.6 0.056 563MKP275KE 300 18x11x5 15 0.8 0.068 683MKP275K 300 18x11x5 15 0.8 0.068 683MKP275KD 400 13x11x5 10 0.6 0.082 823MKP275KD 400 13x12x6 10 0.6 0.082 823MKP275KE 300 18x11x5 15 0.8 0.1 104MKP275K 300 18x11x5 15 0.8 0.1 104MKP275KD 400 13x12x6 10 0.8 Capacitance (µF) Capacitance (µF) 0.12 124MKP275KD 400 13x13x7 10 0.6 0.15 154MKP275K 180 26x14.5x6 22.5 0.8 0.15 154MKP275KD 400 13x14x8 10 0.6 0.15 154MKP275KE 300 18x13.5x7.5 15 0.8 0.18 184MKP275KE 300 18x12x6 15 0.8 0.18 184MKP275KG 180 26x14.5x6 22.5 0.8 0.22 224MKP275K 180 26x14.5x6 22.5 0.8 0.22 224MKP275KB 300 18x14x8 15 0.8 0.27 274MKP275KE 300 18x14.5x7.5 15 0.8 0.33 334MKP275K 180 26x17x8.5 22.5 0.8 0.33 334MKP275KE 300 18x13.5x10 15 0.8 0.39 394MKP275KE 300 18x17x8 15 0.8 0.47 474MKP275KE 300 18x18x9 15 0.8 0.47 474MKP275K 120 32x18x9 27.5 0.8 0.47 474MKP275KB 180 26x16.5x7 22.5 0.8 0.56 564MKP275KE 300 18x19x10 15 0.8 0.56 564MKP275KH 120 31x20x10 27.5 0.8 0.68 684MKP275K 120 31x20x10 27.5 0.8 0.68 684MKP275KG 180 26x17x8 22.5 0.8 0.82 824MKP275KG 180 26x18x9 22.5 0.8 0.82 824MKP275KH 120 31x20x11 27.5 0.8 1 105MKP275K 120 31x20x11 27.5 0.8 1 105MKP275KG 180 26x19x10 22.5 0.8 1.2 125MKP275KG 180 26x20x11.5 22.5 0.8 1.5 155MKP275K 120 31x23.5x14 27.5 0.8 1.5 155MKP275KE 180 26x22x12 22.5 0.8 1.8 185MKP275KE 180 26x24x14 22.5 0.8 2.2 225MKP275K 120 31x26x18 27.5 0.8 2.2 225MKP275KE 180 26x25x15 22.5 0.8 3.3 335MKP275KH 100 31x33x18 27.5 1.0 3.9 395MKP275KJ 100 41.5x35x20 37.5 1.0 4.7 475MKP275KH 120 31.5x37x22 27.5 1.0 4.7 475MKP275KJ 100 41.5x32x19 37.5 1.0 5.6 565MKP275KJ 100 41.5x35x20 37.5 1.0 6.8 685MKP275KJ 100 41.5x39x24 37.5 1.0 8.2 825MKP275KJ 100 41.5x45x30 37.5 1.0 10 106MKP275KJ 100 41.5x45x30 37.5 1.0 Class X2 Radial Lead Metallized Polypropylene Capacitors

3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com X2 capacitors are used to suppress electrical noise by reducing the input impedance of the device incorporating the capacitor. X2 capacitors are connected across the supply line where failure of the capacitor will not result in,personal exposure to electrical shock. X2 capacitors are to be used in applications where the peak voltage is ≤1200V. L max H max S±0.5 d±0.05 T max All dimensions in (mm) *17mm lead length available upon request 5 min.* N L Cy Cx Cy UL CSA CB ENEC

310 VAC

250 VAC

275 VAC

FOK X2*A FOK Y2*B X E-317132 158927, LR85363 DE-1-11829 139131L 1414 IEC-60384-14 EN-1324000 IEC-60384-14 Safety Agency Standard File # Rated Voltage Class MKP Class X2 Radial Lead Metallized Polypropylene Capacitors PHYSICAL DIMENSIONS A- Antenna coupling, Line Bypass, Across the line B- Electromagnetic Interference Filter