8219318 FESTO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
VOFT-L14-T62-MZS-G18-1M8RL-2APC Part number: 8219318 General operating condition Data sheet Feature Value Valve function 6/2-way valve, monostable, two-channel Actuation type Electrical Width 29 mm Nominal flow rate standardized according to ISO 8778 400 l/min Normal nominal flow rate (normalized to DIN 1343) 360 l/min Pneumatic working port G1/8 Operating voltage 24V DC Operating pressure 0 MPa ... 1 MPa Operating pressure 0 bar ... 10 bar Operating pressure 0 psi ... 145 psi Structural design Piston gate valve Reset method Mechanical spring Degree of protection IP65 CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive UKCA marking (see declaration of conformity) To UK instructions for EMC To UK RoHS instructions Exhaust air function Without flow control option Sealing principle Soft Mounting position Any Conforms to standard EN 60947-5-2 Manual override Covered Type of control Pilot-controlled Pilot air supply port External Flow direction Non-reversible Symbol 00997537 Measuring principle Inductive Lap Underlap Reverse polarity protection for all electrical connections Sensor reverse polarity protection For all electrical connections Note on forced dynamization Current information on this issue can be found in Technical Report V Switching position indication LED Signal status display Yellow LED, valve control 1/19/26 - Subject to change - Festo SE & Co. KG 1/3
Switching position sensing Normal position with sensor Sensor switching status indication LED Pilot pressure 3.5 bar ... 8 bar b-value 0.45 C value 1.5 l/sbar Switching time off 65 ms On switching time 14 ms Pneumatic valve - sensor ON switching time 11 ms Pneumatic valve - sensor switching time off 70 ms DC operating voltage range 24 V Duty cycle 100% Max. positive test pulse with 0 signal 800 µs Max. negative test pulse on 1 signal 400 µs Nominal operating voltage DC 24 V Permissible voltage fluctuations -10% Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4] Information on operating and pilot media Operation with oil lubrication not possible Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27 Corrosion resistance class (CRC) 2 - Moderate corrosion stress LABS (PWIS) conformity VDMA24364 zone III Cleanroom suitability, measured according to ISO 14644-14 Class 5 according to ISO 14644-1 Storage temperature -10 °C ... 60 °C Temperature of medium -5 °C ... 50 °C Noise level 64 dB(A) Protection against direct and indirect contact PELV Pilot medium Compressed air as per ISO 8573-1:2010 [7:4:4] Ambient temperature -5 °C ... 50 °C Nominal altitude of use above sea level 1000 m as per VDE 0580 Product weight 280 g DC sensor operating voltage range 10 V ... 30 V Sensor short circuit protection yes Sensor idle current ≤10 mA Max. output current, sensor ≤200 mA Sensor max. switching frequency 5000 Hz Sensor residual ripple ± 10 % Sensor voltage drop ≤2 V Electrical connection 2x plugs 3-pin M8x1 A-coded as per EN 61076-2-104 Sensor connection Cable 3-pin 2.5 m Type of mounting With through-hole for M4 screw Pilot air port 14 M5 Pneumatic connection 1 G1/8 Pneumatic connection 2 G1/8 Pneumatic connection 3 G1/8 Pneumatic connection 4 G1/8 Pneumatic connection 5 G1/8 Pneumatic connection 6 G1/8 Note on materials RoHS-compliant 1/19/26 - Subject to change - Festo SE & Co. KG 2/3
Housing material Wrought aluminum alloy Material of cable sheath PVC Material of screws Steel, chemically nickel-plated Switching element function N/C contact 1/19/26 - Subject to change - Festo SE & Co. KG 3/3