820-IF70.0M-A

820-IF70.0M-A OSCILENT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Part Number Package Application Last Modified 820-IF70.0M-A 20.2 x 12.6 Thru Hole Base Station & Repeater May 02 2003 TYPE :

70.0 MHz Bandpass Filter

8.5 MHz Bandwidth

PART NUMBER : 820-IF70.0M-A Horizontal : 3.0 MHz/Div Veritical : 10 dB/Div Horizontal : 1.2 MHz/Div Veritical : 1 dB/Div Veritical : 100 ns/Div OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency 69.94 70.00 70.06 MHz Insertion Loss - 20.0 22.0 dB 1dB Bandwidth 8.3 8.5 - MHz 3dB Bandwidth 8.5 8.7 - MHz 40dB Bandwidth - 10.2 10.5 MHz Passband Ripple - 0.7 1.0 dB Group Delay Variation - 70 100 nsec Absolute Delay - 2.55 - µsec Ultimate Rejection 50 55 - dB Substrate Material - YZ-LN - - Ambient Temperature - 25 - °C * Custom SAW IF Filters available. Contact Oscilent for assistance. PACKAGE OUTLINE (mm) TEST FIXTURE Page 1 of 2Oscilent Corporation IF SAW Filter | 820-IF70.0M-A 12/28/2005http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if70_0a.htm

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map L1 = 100nH L2 = 100nH Source/Load Impedance = 50 ohms Part No.: 820-IF70.0M-A Page 2 of 2Oscilent Corporation IF SAW Filter | 820-IF70.0M-A 12/28/2005http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if70_0a.htm