820-IF140.0M-A

820-IF140.0M-A OSCILENT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Part Number Package Application Last Modified 820-IF140.0M-A 20.2 x 12.6 Thru Hole Base Station & Repeater May 30 2003 TYPE :

140.0 MHz Bandpass Filter

4.1 MHz Bandwidth

PART NUMBER : 820-IF140.0M-A Horizontal : 1.0 MHz/Div Veritical : 10 dB/Div Horizontal : 0.6 MHz/Div Veritical : 1 dB/Div Veritical : 100 ns/Div OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency 139.94 140.0 140.06 MHz Insertion Loss - 23.1 25.0 dB 1dB Bandwidth 3.8 3.93 - MHz 3dB Bandwidth 4.1 4.24 - MHz 40dB Bandwidth - 5.7 5.9 MHz Passband Ripple - 0.5 0.7 dB Group Delay Variation - 60 100 nsec Absolute Delay - 1.62 - µsec Ultimate Rejection 50 55 - dB Substrate Material - Quartz - - Ambient Temperature - 25 - °C Phase Linearity - 2.7 5.0 degc * Custom SAW IF Filters available. Contact Oscilent for assistance. PACKAGE OUTLINE (mm) TEST FIXTURE Page 1 of 2Oscilent Corporation IF SAW Filter | 820-IF140.0M-A 12/28/2005http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if140_0a.htm

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map L1 = 100nH C1 = 43pF L2 = 90nH C2 = 56pF Source/Load Impedance = 50 ohms Part No.: 820-IF140.0M-A Page 2 of 2Oscilent Corporation IF SAW Filter | 820-IF140.0M-A 12/28/2005http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if140_0a.htm