820-IF114.99M-A

820-IF114.99M-A OSCILENT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Part Number Package Application Last Modified 820-IF114.99M-A 20.2 x 12.6 Thru Hole Base Station & Repeater May 30 2003 TYPE :

114.99 MHz Bandpass Filter

1.8 MHz Bandwidth

PART NUMBER : 820-IF114.99M-A Horizontal : 0.8 MHz/Div Veritical : 10 dB/Div Horizontal : 0.4 MHz/Div Veritical : 1 dB/Div Veritical : 100 ns/Div OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency 114.95 114.99 115.03 MHz Insertion Loss - 20.0 23.0 dB 0.5dB Bandwidth 1.4 1.6 - MHz 3dB Bandwidth 1.8 2.05 - MHz 50dB Bandwidth - 3.44 3.8 MHz Passband Ripple - 0.3 0.5 dB Group Delay Variation - 100 200 nsec Absolute Delay - 1.9 - µsec Ultimate Rejection 50 55 - dB Substrate Material - Qz - - Ambient Temperature - 25 - °C Phase Linearity - 2.5 7.0 degc * Custom SAW IF Filters available. Contact Oscilent for assistance. PACKAGE OUTLINE (mm) TEST FIXTURE Page 1 of 2Oscilent Corporation IF SAW Filter | 820-IF114.99M-A 12/28/2005http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if114_99a.htm

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map L1 = 100nH C1 = 56pF L2 = 86nH C2 = 56pF Source/Load Impedance = 50 ohms Part No.: 820-IF114.99M-A Page 2 of 2Oscilent Corporation IF SAW Filter | 820-IF114.99M-A 12/28/2005http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if114_99a.htm