819-IF100.0M-B

819-IF100.0M-B OSCILENT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Part Number Package Application Last Modified 819-IF100.0M-B 19 x 6.5 SMD Base Stat ion, Repeater, HDR, IMT-2000 May 30 2003 TYPE :

100.0 MHz Bandpass Filter

100.0 KHz Bandwidth

PART NUMBER : 819-IF100.0M-B Horizontal : 0.2 MHz/Div Veritical : 10 dB/Div Horizontal : 0.4 MHz/Div Veritical : 1 dB/Div OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency - 100.0 - MHz Insertion Loss - 12.5 15.0 dB 1dB Bandwidth 84.0 88.0 - KHz 3dB Bandwidth 105.0 115.0 - KHz 40dB Bandwidth - 375.0 400.0 KHz Passband Ripple - 0.3 0.6 dB Group Delay Variation - 2.2 2.7 nsec Absolute Delay - 6.2 - µsec Ultimate Rejection 40 45 - dB Substrate Material - Quartz - - Ambient Temperature - 25 - °C * Custom SAW IF Filters available. Contact Oscilent for assistance. PACKAGE OUTLINE (mm) TEST FIXTURE Page 1 of 2Oscilent Corporation IF SAW Filter | 819-IF100.0M-B 12/28/2005http://www.oscilent.com/spec_pages/if_sawfilter/if_819_if100_0b.htm

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map L1 = 352nH L2 = 320nH C1 = 36pF C2 = 2pF C3 = 62pF C4 = 3pF Source/Load Impedance = 50 ohms Part No.: 819-IF100.0M-B Page 2 of 2Oscilent Corporation IF SAW Filter | 819-IF100.0M-B 12/28/2005http://www.oscilent.com/spec_pages/if_sawfilter/if_819_if100_0b.htm