813-SL100.0M-28_14 OSCILENT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Telephone: 1.949.252.0522 Fax: 1.949.252.0522 Email: sales@oscilent.com Product Specification www.oscilent.com REV A January 2011 Oscilent Controlled Document Ordering Code / Part Number Product Description 813-SL100.0M-28 Low-Loss 100MHz IF SAW Filter 28MHz Bandwidth Specification Contents o Mechanical Dimensions o Test Circuit o Maximum Ratings o Electrical Specification o Frequency Response Notes o Electrostatic Sensitive Device (ESD) o Avoid excessive ultrasonic exposure o Solderability compatible with JEDEC J-STD-020C Pb-free process, 260°C peak reflow temperature o This product complies with EU dire ctive 2002/95/EC (RoHS compliance)
813-SL100.0M-28 January 2011 Rev A Low-Loss 100MHz IF SAW Filter 28MHz Bandwidth Product Specification P. 1 www.oscilent.com Mechanical Dimensions (mm) Test Circuit Pin Description A, B, C, D, F, G, H, I, J, L Ground K Input E Output Test Fixture & Values Input L1 = 68 nH Q > 40 Output L2 = 68 nH Q > 40, C2 = 15 pF Source/Load Impedance 50 Ω
813-SL100.0M-28 January 2011 Rev A Low-Loss 100MHz IF SAW Filter 28MHz Bandwidth Product Specification P. 2 www.oscilent.com Maximum Ratings Parameters Description Unit Minimum Typical Maximum Operating Temperature Range °C -30 - +80 Storage Temperature Range °C -40 - +85 Maximum DC Voltage V - - 10 Maximum Input Power dBm - - 10 Source Impedance (single ended)(1) Ω - 50 - Load Impedance (single ended)(1) Ω - 50 - Notes: With Matching Network (Ref. Testing Environment Circuit as shown above). Those impedances could be modified with different impedance values and/or structures, if necessary. Electrical Specification Parameters Description Unit Minimum Typical Maximum Center Frequency (Fo) MHz - 100.0 - Insertion Loss at Fo dB - 17.5 19.5 Temperature Coefficient ppm/°C - -86 - Amplitude Ripple within fo ±13.0 MHz dB p-p - 0.5 1.0 Group Delay Variation within fo ±13.0 MHz nsec - 50 80 Absolute Delay at Fo µsec - 0.88 0.92 Bandwidth at –1.0 dB MHz 27.0 28.1 - Bandwidth at –3.0 dB MHz 28.0 29.0 - Bandwidth at –40.0 dB MHz - 33.3 35 Relative Attenuation: Lower sidelobe dB 40 47 - Upper sidelobe dB 40 47 -
813-SL100.0M-28 January 2011 Rev A Low-Loss 100MHz IF SAW Filter 28MHz Bandwidth Product Specification P. 3 www.oscilent.com Frequency Response