8020 CK-COMPONENTS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 17
Technical content
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A
8020 Series
Snap-acting Momentary Pushbutton Switches Features/Benefits
- Positive tactile feel
- Multi-positions available
- Wide variety of termination options
- Epoxy terminal seal compatible with bottom wash cleaning
- RoHS compliant models available Typical Applications
- Instrumentation
- Computer peripherals
- Telecommunications equipment Specifications CONTACT RATING: B contact material (8X25 Models): 0.4 VA max. @ 20 V AC or DC maximum. G contact material (8X21, U8X1 Models): 1 AMP @ 120 V AC or 28 V DC or 0.4 VA max. @ 20 V AC or DC max. Note: Break-before-makecontacts. Multi-pole contacts do not make and break simultaneously. See page A-43 for additional ratings. ELECTRICAL LIFE: 60,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 50 mΩ typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: 8X2X MODELS: –30ºC to 75ºC. U8X1 MODELS: –30ºC to 65ºC. CAP INSTALLATION FORCE: 10 lbs. max. permissible. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). NOTE: Any models supplied with B, P , R, or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CASE: Glass filled nylon 6/6 or diallyl phthalate (DAP), flame retardant (UL 94V-0). PLUNGER: Glass filled nylon or glass filled polyester (PBT) (UL 94V-0). CAP & FRAME: Nylon, black, standard. BUSHING: Brass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, matte-tin plated. N.O. & N.C. CONTACTS: 8X21, U8X1 MODELS: G contact material: Coin silver, with gold plate over nickel plate. See page A-43 for additional contact materials. 8X25 MODELS: B contact material: Copper alloy, with gold plate over nickel plate. See page A-43 for additional contact materials. COMMON CONTACT & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. TERMINAL SEAL: Epoxy. Refer to slodering and cleaning Technical Data Chapter. HARDWARE: Nut & Locking Ring: Brass, nickel plated; Lockwasher: Steel, nickel plated. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages A-30 thru A-45. For additional options not shown in catalog, consult Customer Service Center . All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function 8121 SPDT On-Mom. 1 Amp 8125 SPDT On-Mom. 0.4VA 8221 DPDT On-Mom. 1 Amp 8225 DPDT On-Mom. 0.4VA 8321 3PDT On-Mom. 1 Amp 8325 3PDT On-Mom. 0.4VA 8421 4PDT On-Mom. 1 Amp 8425 4PDT On-Mom. 0.4VA Note: UL/CSA models available, see page A-30 and A-31. Actuator or Plunger S Plunger NONE Snap-in J80 Snap-in J81 Snap-in w/frame J82 Snap-in w/frame for LED J83 Snap-in w/frame & flush cap J84 Snap-in w/frame for LED, flush cap J85 Snap-in w/frame & LED J95 PC w/V-bracket & LED L Plunger M Snap-fitting plunger Bushing D9 .280" high, keyway H .250" high, flat NONE No bushing choice required D .280" high, keyway D2 .288" high, flat D3 .180" high D8 .288" high, flat H9 .250" high, flat, hi torque Y .350" high, keyway Y3 6.35mm high, keyway, hi torque Y4 .378" high, flat, hi torque Y9 .350" high, keyway Contact Material B Gold P Gold, matte-tin G Gold over silver R Gold over silver, matte-tin Seal E Epoxy I Epoxy potted base Cap Color
2 Black
1 White
3 Red
4 Orange
5 Yellow
6 Green
7 Blue
9 Gray
A Right angle, PC thru-hole AV2 Vertical right angle, PC thru-hole C PC Thru-hole Z Solder lug A2 Right angle, PC thru-hole A3 Right angle, snap-in, PC thru-hole A4 Right angle, PC thru-hole, reversed terminals A6 Right angle, PC thru-hole AV Vertical right angle, PC thru-hole AV1Vertical right angle, PC thru-hole AV3Vertical right angle, snap-in, PC thru-hole R Right angle with PCB R2 Right angle with PCB, reversed terminals V2 .555" high, V-bracket V3 .460" high, V-bracket V4 .630" high, V-bracket V6 .460" high, V-bracket V7 .630" high, V-bracket V8 .953" high, V-bracket V9 1.150" high, V-bracket V31 .460" high, snap-in V-bracket V61 .460" high, snap-in V-bracket W .750" long, wire wrap W1 .964" long, wire wrap W3 .425" long, wire wrap W4 1.062" long, wire wrap Z3 Quick connect
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on Third Angle Projection Snap-acting Momentary Pushbutton Switches SWITCH FUNCTION 3PDT MOM. MOM. ON ON U8318321 8325 DPDT 1-2,4-51-3,4-6 MOM. MOM. ON ON U8218221 8225 DP SPDT 1-21-3 MOM. MOM. ON ON U8118121 8125 SP SCHEMATIC CONNECTED TERMINALS POS. 1 POS. 2 SWITCH FUNCTION POS. 1 POS. 2 UL/CSA* MODEL NO.MODEL NO. NO. POLES SPDT DPDT 3PDT Terminal Nos. For Reference Only Terminal Nos. For Reference Only Part number shown: 8121SHZGE Part number shown: 8221SHZGE Terminal Nos. For Reference OnlyPart number shown: 8321SHZGE C&K marking on opposite side C&K marking on opposite side MOM. = Momentary *U811 thru U841 model numbers with all options (except R, R2 terminations) when ordered with G or R contact material. 8X25 models must be ordered with B or P contact material. 8X21 and U8X1 models must be or dered with G or R contact material.
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A Third Angle Projection Snap-acting Momentary Pushbutton Switches SWITCH FUNCTION ACTUATOR—SNAP-IN FRONT MOUNT PANEL MOUNTING PANEL MOUNTING 4PDT MOM. MOM. ON ON U8418421 8425 SCHEMATIC CONNECTED TERMINALS POS. 1 POS. 2 SWITCH FUNCTION POS. 1 POS. 2 UL/CSA* MODEL NO.MODEL NO. NO. POLES 4PDT Terminal Nos. For Reference OnlyPart number shown: 8421SHZGE MOM. = Momentary * U811 thru U841 model numbers with all options (except R, R2 terminations) when ordered with G or R contact material. Other colors available, consult Customer Service Center. Cap and Frame Finish: matte. NOTE: Caps and frames available separately, see pages A-44 and A-45. NOTE: No frame color choice required. NOTE: Available with C, W-W4, Z or Z3 terminations and SPDT and DPDT models only. 8X25 models must be ordered with B or P contact material. 8X21 and U8X1 models must be ordered with G or R contact material. C&K marking on opposite side C&K marking on opposite side NONE No Frame Color (J80 option)
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on Third Angle Projection Snap-acting Momentary Pushbutton Switches ACTUATOR—SNAP-IN FRONT MOUNT PANEL MOUNTING J83 SNAP-IN WITH FRAME AND FLUSH CAP LED not included. For LED information, see page A-45. LED not included. For LED information, see page A-45. J84 SNAP-IN WITH FRAME FOR LED, FLUSH CAP J82 SNAP-IN WITH FRAME FOR LED Other colors available, consult Customer Service Center. Cap and Frame Finish: matte. Available with C, W-W4, Z or Z3 terminations and SPDT and DPDT models only. NOTE: Caps and frames available separately, see pages A-44 and A-45.
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A Third Angle Projection Snap-acting Momentary Pushbutton Switches ACTUATOR—SNAP-IN FRONT MOUNT ACTUATOR—PC MOUNT * Increase this dim. to .620/.625 (15,75/15,88) for .091/.125 (2,31/3,18) thk. panels. PANEL MOUNTING PC MOUNTING J85 SNAP-IN WITH FRAME AND LED J95 PC WITH V-BRACKET AND LED ACTUATOR OR PLUNGER CAP COLOR LED COLOR FRAME COLOR ACTUATOR OR PLUNGER CAP COLOR LED COLOR Available with C, W-W4, Z or Z3 terminations and SPDT models only. For LED information see page A-45. NOTE: Caps & frames available separately, see pages A-44 and A-45. For LED information see page A-45. NOTE: Caps available separately, see page A-44. Available with V3 terminations and SPDT models only. For LED information see page A-45.
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on Third Angle Projection Snap-acting Momentary Pushbutton Switches PLUNGER BUSHING 1/4-40 UNS-2A NONE NO BUSHING CHOICE REQUIRED (JXX ACTUATORS) Y9 .350" HIGH UNTHREADED, KEYWAYH9 .250" HIGH UNTHREADED, FLAT H .250" HIGH THREADED, FLAT Y .350" HIGH THREADED, KEYWAY D9 .280" HIGH UNTHREADED, KEYWAY D .280" HIGH THREADED, KEYWAY M SNAP-FITTING PLUNGER L PLUNGER NONE NO PLUNGER CHOICE REQUIRED (JXX ACTUATORS) S PLUNGER ACTUATOR OR PLUNGER DIM. ‘A’ FOR V3-V61 TERMINATIONS DIM. ‘A’ FOR A, A2, A3, A4, A6, AV-A3, R & R2 TERMINATIONS DIM. ‘A’ FOR C, W-W4, Z & Z3 TERMINATIONS AVAILABLE BUSHINGS DIM. ‘C’ FOR V3-V61 TERMINATIONS DIM. ‘C’ FOR A, A2, A3, A4, A6, AV-A3, R & R2 TERMINATIONS DIM. ‘C’ FOR C, W-W4, Z & Z3 TERMINATIONS AVAILABLE BUSHINGS DIM. ‘B’ FOR V3-V61 TERMINATIONS DIM. ‘B’ FOR A, A2, A3, A4, A6, AV-A3, R & R2 TERMINATIONS DIM. ‘B’ FOR C, W-W4, Z & Z3 TERMINATIONS AVAILABLE BUSHINGS NOTE: When selecting plunger option, bushing selection must also be made, see next page. No plunger option is required when any JXX actuator option is selected. Additional plunger lengths ar e available on SPDT and DPDT models, consult Customer Service Center . Not all plunger lengths sufficient for use with caps, see page A-44. H bushing standard with C, W-W4, Z or Z3 terminations. H, H9 bushings not available on single pole models with A3-A6, R, R2 terminations. Will withstand 12 in./lbs. of torque with no distortion. D9 bushing standard with A-A6, R, R2 AV-AV3 terminations. N/A = NOT AVAILABLE
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A Third Angle Projection Snap-acting Momentary Pushbutton Switches BUSHING TERMINATIONS 1/4-40 UNS-2A PC MOUNTING DIM \`A ' W W1, W3, W4 WIRE WRAPZ3 QUICK CONNECT C PC THRU-HOLEZ SOLDER LUG D3 .180" HIGH UNTHREADED D8 .288" HIGH UNTHREADED, FLAT D2 .288" HIGH THREADED, FLATY4 .378" HIGH THREADED, FLATY3 6.35mm THREADED, KEYWAY SPDT thru 4PDT SPDT thru 4PDT SPDT thru 4PDTSPDT thru 4PDT Not available with J95 actuator, P or R contact material. Mating quick connector available, order part number 530100000, page A-44. Not available with J95 actuator option. Not available with J95 actuator option. Not available with J95 actuator, P or R contact material. NOTE: No bushing option choice required when JXX actuator option is selected. When selecting bushing option, plunger selection must also be made, see previous page. Plunger lengths vary with bushing and termination options selected. NOTE: Two mounting nuts, locking ring and lockwasher supplied standar d with threaded bushings. Optional mounting nut and locking ring styles available, see section “Technical Data and Additional Hardware”. Y3 & Y4 bushings not available on single pole models with A3-A6, R, R2 terminations. Will withstand 12 in./lbs. of torque with no distortion. D2, D8 bushings not available with C, W-W4, Z, Z3 terminations. D3 bushing available with A, A2, A3, AV, AV2, AV3 and V2-V61 terminations only. W .750 (19,05) W1 .964 (24,49) W3 .425 (10,80) W4 1.062 (26,97) DIM ‘A’ OPTION CODE
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on Third Angle Projection Snap-acting Momentary Pushbutton Switches TERMINATIONS PC MOUNTING PC MOUNTING SECTION A-A .138 (3,51) A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE A RIGHT ANGLE, PC THRU-HOLE A RIGHT ANGLE, PC THRU-HOLE A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE 8121SD9AGE SPDT 8221SD9AGE DPDT Not available with JXX actuators and I seal. Terminal bend radii and lead-in manufacturing option. Not available with JXX actuators and I seal option. Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A Third Angle Projection Snap-acting Momentary Pushbutton Switches TERMINATIONS SECTION A-A PC MOUNTING 8321SD9AGE 3PDT 8121SD9A2GE SPDT 8121SD9A4GE SPDT A4 RIGHT ANGLE, PC THRU-HOLE, REVERSED TERMINALS A2 RIGHT ANGLE, PC THRU-HOLE A RIGHT ANGLE, PC THRU-HOLE Not available with JXX actuators and I seal option. Terminal bend radii and lead-in manufacturing option. Not available with JXX actuators, I seal option. Terminal bend radii and lead-in manufacturing option. Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings and I seal. Terminal bend radii and lead-in manufacturing option. The A4 and R2 termination options ar e functionally identical and fit the same PC mounting patter n. The switches, however, are shifted relative to the mounting holes. The PC pattern must clear the switch support legs. Unlike the R2, the A4 option is available with UL/CSA. PC MOUNTING
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on Third Angle Projection Snap-acting Momentary Pushbutton Switches TERMINATIONS PC MOUNTING PC MOUNTING Reversed terminals PC MOUNTING PC MOUNTING AV VERTICAL RIGHT ANGLE, PC THRU-HOLE, .100" PITCH A6 RIGHT ANGLE, PC THRU-HOLE R2 RIGHT ANGLE WITH PCB, REVERSED TERMINALS R RIGHT ANGLE WITH PCB Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings and I seal. Terminal bend radii and lead-in manufacturing option. Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings, I seal option. R termination not UL/CSA approved. Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings, I seal option. R2 termination not UL/CSA approved. The A6 and R termination options are functionally identical and fit the same PC mounting pattern, The switches, however, are shifted relative to the mounting holes. The PC pattern must clear the switch support legs. Unlike the R, the A6 option is available with UL/CSA. 8121SD9A6GE SPDT 8121SD9RGE SPDT 8121SD9R2GE SPDT 8121SD9AVGE SPDT
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A Third Angle Projection Snap-acting Momentary Pushbutton Switches TERMINATIONS .15 (3,8) .33 TYP. (8,4) PC MOUNTING PC MOUNTING AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH AV1 VERTICAL RIGHT ANGLE, EXTENDED, PC THRU-HOLE, .150" PITCH AV3 VERTICAL RIGHT ANGLE, SNAP-IN,, PC THRU-HOLE, .150" PITCH AV1 VERTICAL RIGHT ANGLE, EXTENDED, PC THRU-HOLE, .150" PITCH AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH 8121SD9AV2GE SPDT 8221SD9AV2GE DPDT Not available with JXX actuators and I seal. Terminal bend radii and lead-in manufacturing option. Not available with JXX actuators and I seal. Terminal bend radii and lead-in manufacturing option.
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on Third Angle Projection Snap-acting Momentary Pushbutton Switches TERMINATIONS .15 (3,8) .33 TYP. (8,4) PC MOUNTING PC MOUNTING PC MOUNTING 8321SD9AV2GE 3PDT 8421SD9AV2GE 4PDT 8121SD3__GE SPDT AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, 150" PITCH AV1 VERTICAL RIGHT ANGLE, EXTENDED, PC THRU-HOLE, .150" PITCHAV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN AV1 VERTICAL RIGHT ANGLE, EXTENDED, PC THRU-HOLE, .150" PITCH AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE, .150" PITCH AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, 150" PITCH Not available with JXX actuators and I seal. Terminal bend radii and lead-in manufacturing option. Not available with JXX actuators and I seal. Terminal bend radii and lead-in manufacturing option. Not available with JXX actuators and I seal. V2 .555 (14,10) V6, V61 .460 (11,68) V7 .630 (16,00) V8 .953 (24,21) DIM ‘A’OPTION CODE
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A Third Angle Projection Snap-acting Momentary Pushbutton Switches TERMINATIONS PC MOUNTING PC MOUNTING PC MOUNTING V61 VERTICAL MOUNT, V-BRACKET, SNAP-IN V2, V6, V7, V8 VERTICAL MOUNT, V-BRACKET V2, V7, V8 VERTICAL MOUNT, V-BRACKET V2, V7, V8 VERTICAL MOUNT, V-BRACKET 8221SD3__GE DPDT 8321SD3__GE 3PDT 8421SD3__GE 4PDT Not available with JXX actuators and I seal. Not available with JXX actuators and I seal. Not available with JXX actuators and I seal. V2 .555 (14,10) V6, V61 .460 (11,68) V7 .630 (16,00) V8 .953 (24,21) DIM ‘A’ OPTION CODE V2 .555 (14,10) V7 .630 (16,00) V8 .953 (24,21) DIM ‘A’ OPTION CODE V2 .555 (14,10) V7 .630 (16,00) V8 .953 (24,21) DIM ‘A’ OPTION CODE
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on Third Angle Projection Snap-acting Momentary Pushbutton Switches TERMINATIONS PC MOUNTING PC MOUNTING .630 (16,00) PC MOUNTING V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN V3, V4, V9 VERTICAL MOUNT, V-BRACKET V4, V9 VERTICAL MOUNT, V-BRACKET V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN V3, V4, V9 VERTICAL MOUNT, V-BRACKET V3, V31 .460 (11,68) V4 .630 (16,00) V9 1.150 (29,21) DIM ‘A’ OPTION CODE V3, V31 .460 (11,68) V4 .630 (16,00) V9 1.150 (29,21) DIM ‘A’ OPTION CODE V4 .630 (16,00) V9 1.150 (29,21) DIM ‘A’ OPTION CODE Not available with J8X actuators and I seal. Not available with J8X actuators and I seal. Not available with JXX actuators and I seal. 8121SD3__GE SPDT 8221SD3__GE DPDT 8321SD3V4GE 3PDT
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A Third Angle Projection Snap-acting Momentary Pushbutton Switches TERMINATIONS CONTACT MATERIAL SEAL PC MOUNTING .630 (16,00) V4 .630 (16,00) V9 1.150 (29,21) DIM ‘A’ OPTION CODE Not available with JXX actuators and I seal. 8421SD3V4GE 4PDT V4, V9 VERTICAL MOUNT, V-BRACKET E EPOXY SEAL I EPOXY POTTED BASE * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 ALL CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
3 COMMON CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate. 4 TERMINALS: Copper alloy, with matte-tin over nickel plate. NOTE: Any models supplied with B, P , R or G contact material are RoHS compliant. U811-U841 models with all options (except R, R2 terminations) when ordered with mandatory G or R contact material. B or P contact material must be ordered with 8X25 models. G or R contact material must be or dered with 8X21, U8X1 models. P or R contact material not available with Z, Z3 terminations. NOTE: Available with C, W-W4, Z, Z3 terminations only. SP .410 (10,41) DP .440 (11,18) 3P .505 (12,83) 4P .505 (12,83) DIM ‘A’ NO. POLES OPTION CODE CONTACT MATERIAL TERMINAL PLATING RATINGS GOLD 1 GOLD 3 MATTE-TIN 4 GOLD 1 MATTE-TIN 4 LOW LEVEL/DRY CIRCUIT LOW LEVEL/DRY CIRCUIT OR POWER 8x25 MODELS ONLY: 0.4 MAX. @ 20 V AC OR DC MAX. 8X21, U8X1 MODELS ONLY: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 1 AMP @ 120 V AC OR 28 V DC. B P G R GOLD OVER SILVER 2,3
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com APu shbu tt on Third Angle Projection Snap-acting Momentary Pushbutton Switches AVAILABLE HARDWARE Cap PART NO.
708901000 WHITE
708902000 BLACK
708903000 RED
708904000 ORANGE
708905000 YELLOW
708906000 GREEN
708907000 BLUE
708909000 GRAY
Material: Nylon Finish: Gloss Cap PART NO.
752701000 WHITE
752702000 BLACK
752703000 RED
752704000 ORANGE
752705000 YELLOW
752706000 GREEN
752707000 BLUE
752709000 GRAY
Material: Nylon Finish: Gloss Cap PART NO.
801801000 WHITE
801802000 BLACK
801803000 RED
801804000 ORANGE
801805000 YELLOW
801806000 GREEN
801807000 BLUE
801809000 GRAY
Material: Nylon Finish: Gloss Cap, Snap-fitting plunger PART NO.
894001000 WHITE
894002000 BLACK
894003000 RED
894004000 ORANGE
894005000 YELLOW
894006000 GREEN
894007000 BLUE
894009000 GRAY
Material: Nylon Finish: Gloss Cap, Snap-fitting plunger PART NO.
894101000 WHITE
894102000 BLACK
894103000 RED
894104000 ORANGE
894105000 YELLOW
894106000 GREEN
894107000 BLUE
894109000 GRAY
Material: Nylon Finish: Gloss Cap, J80, J81, J82, J83 & J84 options only PART NO.
484601000 WHITE
484602000 BLACK
484603000 RED
484604000 ORANGE
484605000 YELLOW
484606000 GREEN
484607000 BLUE
484609000 GRAY
Material: Nylon Finish: Gloss Frame PART NO.
615601000 WHITE
615602263 BLACK
615603000 RED
615605000 YELLOW
615606000 GREEN
615609000 GRAY
Material: Nylon Finish: Matte Fits Z3 Termination female connector PART NO. 530100000 Available in loose pieces. Frame PART NO.
613301000 WHITE
613302263 BLACK
613303000 RED
613305000 YELLOW
613306000 GREEN
613309000 GRAY
Material: Nylon Finish: Matte Cap, J85 & J95 options only PART NO. 459701000 459702000 459703000 459704000 459705000 459706000 459707000 459709000 Material: Nylon Finish: Gloss PART NO.
476801000 WHITE
476802000 BLACK
476803000 RED
476804000 ORANGE
476805000 YELLOW
476806000 GREEN
476807000 BLUE
476809000 GRAY
Material: Nylon Finish: Matte PART NO.
798201000 WHITE
798202263 BLACK
798203000 RED
798204000 ORANGE
798205000 YELLOW
798206000 GREEN
798207000 BLUE
798209000 GRAY
Material: Nylon Finish: Matte NOTE: Additional nuts, locking rings and lockwashers available separately, see section “Technical Data and Additional Hardware”. Other cap & frame colors available, consult Customer Service Center.
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ck-components.com Pu shbu tt on A Third Angle Projection Snap-acting Momentary Pushbutton Switches AVAILABLE HARDWARE .030 (0,76) .200 DIA. (5,08˘) .025 SQ. TYP. (0,63) .750 (19,05).340 (8,64) .230 DIA. (5,84˘) Flat denotes cathode. Suggested LED for J82 & J84 options. Dimensions for reference only. TYPICAL APPLICATION Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. Panel Inserts Special colors, custom markings available, consult Customer Service Center. PANEL INSERT WITH HOLE FOR LED PART NO. 894901000 894902000 894903000 894905000 894906000 894909000 BLANK PANEL INSERT WITHOUT HOLE FOR LED PART NO.
476601000 WHITE
476602000 BLACK
476603000 RED
476605000 YELLOW
476606000 GREEN
476609000 GRAY
.047" (1,19) PANEL THK. PART NO. 432501000 432502263 432503000 432505000 432506000 432509000 .062" (1,57) PANEL THK. PART NO. 432601000 432602263 432603000 432605000 432606000 432609000 .090" (2,29) PANEL THK. PART NO. 432701000 432702263 432703000 432705000 432706000 432709000 .125" (3,18) PANEL THK. PART NO.
432801000 WHITE
432802263 BLACK
432803000 RED
432805000 YELLOW
432806000 GREEN
432809000 GRAY
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and LED INFORMATION SWITCHES WITH LED SUPPLIED: J85, J95 OPTIONS: Rectangular LEDs are supplied on 8020 Series pushbutton switches with J85 and J95 options. These LEDs are factory installed and are not replaceable. The following specifications apply: Process Information: Soldering to LED leads must be completed within 5 seconds at 500ºF (260ºC) maximum. Caution: Circuit elements must limit forward current of LED to 50mA max. continuous. * Extra-bright red LED available (typ. intensity 4.5 mcd), consult Customer Service Center . LEDs are not supplied with J82, J84 options. LED snaps into switch frame surrounding actuator and is wired externally. 125 mW 75 mW 125 mW 50 mA 30 mA 50 mA 2.5 V 20 mA 10 mA 20 mA 2.1 V 1.0 mcd 0.5 mcd 4.0 mcd Green Red* Yellow MAX RATINGS AT 25ºC AMBIENT TEMPERATURE FORWARD CONTINUOUS POWER VOLTAGE FORWARD CURRENT DISSIPATION TYP. FORWARD CURRENT TYP. FORWARD VOLTAGE TYP. INTENSITYCOLOR OPTION CODE